 |
OpenStudio:airflow |
#include <PrjObjects.hpp>
Public Member Functions | |
Constructors and Destructors | |
| RunControl () | |
| Create a new object with default values. More... | |
| RunControl (const RunControl &other) | |
| Create a new object. More... | |
| ~RunControl () | |
| Destroy the object. More... | |
Operators | |
| RunControl & | operator= (const RunControl &other) |
| Copy operator. More... | |
| bool | operator== (const RunControl &other) const |
| Equality operator. More... | |
| bool | operator!= (const RunControl &other) const |
| Inequality operator. More... | |
Input and Output | |
| void | read (Reader &input) |
| Read an object from a Reader. More... | |
| std::string | write () |
| Write the object to a string. More... | |
Getters and Setters | |
| int | sim_af () const |
| Returns the airflow simulation flag: 0 = steady, 1 = dynamic. More... | |
| void | setSim_af (const int sim_af) |
| Sets the airflow simulation flag: 0 = steady, 1 = dynamic. More... | |
| int | afcalc () const |
| Returns the N-R method for non-linear eqns: 0 = SUR, 1 = STR. More... | |
| void | setAfcalc (const int afcalc) |
| Sets the N-R method for non-linear eqns: 0 = SUR, 1 = STR. More... | |
| int | afmaxi () const |
| Returns the maximum number of N-R iterations. More... | |
| void | setAfmaxi (const int afmaxi) |
| Sets the maximum number of N-R iterations. More... | |
| double | afrcnvg () const |
| Returns the relative airflow convergence factor. More... | |
| bool | setAfrcnvg (const double afrcnvg) |
| Sets the relative airflow convergence factor. More... | |
| bool | setAfrcnvg (const std::string &afrcnvg) |
| Sets the relative airflow convergence factor. More... | |
| double | afacnvg () const |
| Returns the absolute airflow convergence factor [1/s]. More... | |
| bool | setAfacnvg (const double afacnvg) |
| Sets the absolute airflow convergence factor [1/s]. More... | |
| bool | setAfacnvg (const std::string &afacnvg) |
| Sets the absolute airflow convergence factor [1/s]. More... | |
| double | afrelax () const |
| Returns the flow under-relaxation coefficient (for SUR). More... | |
| bool | setAfrelax (const double afrelax) |
| Sets the flow under-relaxation coefficient (for SUR). More... | |
| bool | setAfrelax (const std::string &afrelax) |
| Sets the flow under-relaxation coefficient (for SUR). More... | |
| int | uac2 () const |
| Returns the display units for afacnvg. More... | |
| void | setUac2 (const int uac2) |
| Sets the display units for afacnvg. More... | |
| double | Pres () const |
| Returns the pressure test pressure. More... | |
| bool | setPres (const double Pres) |
| Sets the pressure test pressure. More... | |
| bool | setPres (const std::string &Pres) |
| Sets the pressure test pressure. More... | |
| int | uPres () const |
| Returns the display units of pressure test pressure. More... | |
| void | setUPres (const int uPres) |
| Sets the pressure test pressure. More... | |
| int | afslae () const |
| Returns the method for linear equations: 0 = SKY, 1 = PCG. More... | |
| void | setAfslae (const int afslae) |
| Sets the method for linear equations: 0 = SKY, 1 = PCG. More... | |
| int | afrseq () const |
| Returns the linear equation resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| void | setAfrseq (const int afrseq) |
| Sets the linear equation resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| int | aflmaxi () const |
| Returns the maximum number of iterations (PCG). More... | |
| void | setAflmaxi (const int aflmaxi) |
| Sets the maximum number of iterations (PCG). More... | |
| double | aflcnvg () const |
| Returns the relative convergence factor for (PCG). More... | |
| bool | setAflcnvg (const double aflcnvg) |
| Sets the relative convergence factor for (PCG). More... | |
| bool | setAflcnvg (const std::string &aflcnvg) |
| Sets the relative convergence factor for (PCG). More... | |
| int | aflinit () const |
| Returns the linear airflow initialization flag: 0 = don't use, 1 = use. More... | |
| void | setAflinit (const int aflinit) |
| Sets the linear airflow initialization flag: 0 = don't use, 1 = use. More... | |
| int | Tadj () const |
| Returns the temperature adjustment flag: 0 = don't use, 1 = use. More... | |
| void | setTadj (const int Tadj) |
| Sets the temperature adjustment flag: 0 = don't use, 1 = use. More... | |
| int | sim_mf () const |
| Returns the mass fraction (contaminant) simulation method: 0 = none, 1 = steady, 2 = transient, 3 = cyclic. More... | |
| void | setSim_mf (const int sim_mf) |
| Sets the mass fraction (contaminant) simulation method: 0 = none, 1 = steady, 2 = transient, 3 = cyclic. More... | |
| int | ccmaxi () const |
| Returns the maximum number of cyclic iterations. More... | |
| void | setCcmaxi (const int ccmaxi) |
| Sets the maximum number of cyclic iterations. More... | |
| double | ccrcnvg () const |
| Returns the cyclic relative convergence factor. More... | |
| bool | setCcrcnvg (const double ccrcnvg) |
| Sets the cyclic relative convergence factor. More... | |
| bool | setCcrcnvg (const std::string &ccrcnvg) |
| Sets the cyclic relative convergence factor. More... | |
| double | ccacnvg () const |
| Returns the cyclic absolute convergence factor [kg/kg]. More... | |
| bool | setCcacnvg (const double ccacnvg) |
| Sets the cyclic absolute convergence factor [kg/kg]. More... | |
| bool | setCcacnvg (const std::string &ccacnvg) |
| Sets the cyclic absolute convergence factor [kg/kg]. More... | |
| double | ccrelax () const |
| Returns the cyclic (unused) over-relaxation coefficient. More... | |
| bool | setCcrelax (const double ccrelax) |
| Sets the cyclic (unused) over-relaxation coefficient. More... | |
| bool | setCcrelax (const std::string &ccrelax) |
| Sets the cyclic (unused) over-relaxation coefficient. More... | |
| int | uccc () const |
| Returns the display units for ccacnvg. More... | |
| void | setUccc (const int uccc) |
| Sets the display units for ccacnvg. More... | |
| int | mfnmthd () const |
| Returns the non-trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU. More... | |
| void | setMfnmthd (const int mfnmthd) |
| Sets the non-trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU. More... | |
| int | mfnrseq () const |
| Returns the non-trace contaminant resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| void | setMfnrseq (const int mfnrseq) |
| Sets the non-trace contaminant resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| int | mfnmaxi () const |
| Returns the non-trace contaminant maximum iterations. More... | |
| void | setMfnmaxi (const int mfnmaxi) |
| Sets the non-trace contaminant maximum iterations. More... | |
| double | mfnrcnvg () const |
| Returns the non-trace contaminant relative convergence factor. More... | |
| bool | setMfnrcnvg (const double mfnrcnvg) |
| Sets the non-trace contaminant relative convergence factor. More... | |
| bool | setMfnrcnvg (const std::string &mfnrcnvg) |
| Sets the non-trace contaminant relative convergence factor. More... | |
| double | mfnacnvg () const |
| Returns the non-trace contaminant absolute convergence factor. More... | |
| bool | setMfnacnvg (const double mfnacnvg) |
| Sets the non-trace contaminant absolute convergence factor. More... | |
| bool | setMfnacnvg (const std::string &mfnacnvg) |
| Sets the non-trace contaminant absolute convergence factor. More... | |
| double | mfnrelax () const |
| Returns the non-trace contaminant relaxation coefficient. More... | |
| bool | setMfnrelax (const double mfnrelax) |
| Sets the non-trace contaminant relaxation coefficient. More... | |
| bool | setMfnrelax (const std::string &mfnrelax) |
| Sets the non-trace contaminant relaxation coefficient. More... | |
| double | mfngamma () const |
| Returns the non-trace contaminant trapezoidal integration factor. More... | |
| bool | setMfngamma (const double mfngamma) |
| Sets the non-trace contaminant trapezoidal integration factor. More... | |
| bool | setMfngamma (const std::string &mfngamma) |
| Sets the non-trace contaminant trapezoidal integration factor. More... | |
| int | uccn () const |
| Returns the display units for mfnacnvg. More... | |
| void | setUccn (const int uccn) |
| Sets the display units for mfnacnvg. More... | |
| int | mftmthd () const |
| Returns the trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU. More... | |
| void | setMftmthd (const int mftmthd) |
| Sets the trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU. More... | |
| int | mftrseq () const |
| Returns the trace contaminant resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| void | setMftrseq (const int mftrseq) |
| Sets the trace contaminant resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| int | mftmaxi () const |
| Returns the trace contaminant maximum iterations. More... | |
| void | setMftmaxi (const int mftmaxi) |
| Sets the trace contaminant maximum iterations. More... | |
| double | mftrcnvg () const |
| Returns the trace contaminant relative convergence factor. More... | |
| bool | setMftrcnvg (const double mftrcnvg) |
| Sets the trace contaminant relative convergence factor. More... | |
| bool | setMftrcnvg (const std::string &mftrcnvg) |
| Sets the trace contaminant relative convergence factor. More... | |
| double | mftacnvg () const |
| Returns the trace contaminant absolute convergence factor. More... | |
| bool | setMftacnvg (const double mftacnvg) |
| Sets the trace contaminant absolute convergence factor. More... | |
| bool | setMftacnvg (const std::string &mftacnvg) |
| Sets the trace contaminant absolute convergence factor. More... | |
| double | mftrelax () const |
| Returns the trace contaminant relaxation coefficient. More... | |
| bool | setMftrelax (const double mftrelax) |
| Sets the trace contaminant relaxation coefficient. More... | |
| bool | setMftrelax (const std::string &mftrelax) |
| Sets the trace contaminant relaxation coefficient. More... | |
| double | mftgamma () const |
| Returns the trace contaminant trapezoidal integration factor. More... | |
| bool | setMftgamma (const double mftgamma) |
| Sets the trace contaminant trapezoidal integration factor. More... | |
| bool | setMftgamma (const std::string &mftgamma) |
| Sets the trace contaminant trapezoidal integration factor. More... | |
| int | ucct () const |
| Returns the display units for mfnacnvg. More... | |
| void | setUcct (const int ucct) |
| Sets the display units for mfnacnvg. More... | |
| int | mfvmthd () const |
| Returns the CVODE contaminant solver method: 0 = SKY, 2 = SOR, 3 = LU. More... | |
| void | setMfvmthd (const int mfvmthd) |
| Sets the CVODE contaminant solver method: 0 = SKY, 2 = SOR, 3 = LU. More... | |
| int | mfvrseq () const |
| Returns the CVODE contaminant solver resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| void | setMfvrseq (const int mfvrseq) |
| Sets the CVODE contaminant solver resequence flag: 0 = don't resequence, 1 = resequence. More... | |
| int | mfvmaxi () const |
| Returns the CVODE contaminant solver maximum iterations. More... | |
| void | setMfvmaxi (const int mfvmaxi) |
| Sets the CVODE contaminant solver maximum iterations. More... | |
| double | mfvrcnvg () const |
| Returns the CVODE contaminant solver relative convergence factor. More... | |
| bool | setMfvrcnvg (const double mfvrcnvg) |
| Sets the CVODE contaminant solver relative convergence factor. More... | |
| bool | setMfvrcnvg (const std::string &mfvrcnvg) |
| Sets the CVODE contaminant solver relative convergence factor. More... | |
| double | mfvacnvg () const |
| Returns the CVODE contaminant solver absolute convergence factor. More... | |
| bool | setMfvacnvg (const double mfvacnvg) |
| Sets the CVODE contaminant solver absolute convergence factor. More... | |
| bool | setMfvacnvg (const std::string &mfvacnvg) |
| Sets the CVODE contaminant solver absolute convergence factor. More... | |
| double | mfvrelax () const |
| Returns the CVODE contaminant solver relaxation coefficient. More... | |
| bool | setMfvrelax (const double mfvrelax) |
| Sets the CVODE contaminant solver relaxation coefficient. More... | |
| bool | setMfvrelax (const std::string &mfvrelax) |
| Sets the CVODE contaminant solver relaxation coefficient. More... | |
| int | uccv () const |
| Returns the display units for mfvacnvg. More... | |
| void | setUccv (const int uccv) |
| Sets the display units for mfvacnvg. More... | |
| int | mf_solver () const |
| Returns the mass fraction integration method: 0 = trapezoid, 1 = STS, 2 = CVODE. More... | |
| void | setMf_solver (const int mf_solver) |
| Sets the mass fraction integration method: 0 = trapezoid, 1 = STS, 2 = CVODE. More... | |
| int | sim_1dz () const |
| Returns the 1D zone flag: 0 = don't use, 1 = use. More... | |
| void | setSim_1dz (const int sim_1dz) |
| Sets the 1D zone flag: 0 = don't use, 1 = use. More... | |
| int | sim_1dd () const |
| Returns the 1D duct flag: 0 = don't use, 1 = use. More... | |
| void | setSim_1dd (const int sim_1dd) |
| Sets the 1D duct flag: 0 = don't use, 1 = use. More... | |
| double | celldx () const |
| Returns the default length of duct cells for C-D model [m]. More... | |
| bool | setCelldx (const double celldx) |
| Sets the default length of duct cells for C-D model [m]. More... | |
| bool | setCelldx (const std::string &celldx) |
| Sets the default length of duct cells for C-D model [m]. More... | |
| int | sim_vjt () const |
| Returns the variable junction temperature flag: 0 = don't compute, 1 = compute. More... | |
| void | setSim_vjt (const int sim_vjt) |
| Sets the variable junction temperature flag: 0 = don't compute, 1 = compute. More... | |
| int | udx () const |
| Returns the display units of celldx. More... | |
| void | setUdx (const int udx) |
| Sets the display units of celldx. More... | |
| int | cvode_mth () const |
| Returns the CVODE contaminant solver multi-step method: 0 = am, 1 = bdf. More... | |
| void | setCvode_mth (const int cvode_mth) |
| Sets the CVODE contaminant solver multi-step method: 0 = am, 1 = bdf. More... | |
| double | cvode_rcnvg () const |
| Returns the CVODE contaminant solver multi-step relative convergence factor. More... | |
| bool | setCvode_rcnvg (const double cvode_rcnvg) |
| Sets the CVODE contaminant solver multi-step relative convergence factor. More... | |
| bool | setCvode_rcnvg (const std::string &cvode_rcnvg) |
| Sets the CVODE contaminant solver multi-step relative convergence factor. More... | |
| double | cvode_acnvg () const |
| Returns the CVODE contaminant solver multi-step absolute convergence factor. More... | |
| bool | setCvode_acnvg (const double cvode_acnvg) |
| Sets the CVODE contaminant solver multi-step absolute convergence factor. More... | |
| bool | setCvode_acnvg (const std::string &cvode_acnvg) |
| Sets the CVODE contaminant solver multi-step absolute convergence factor. More... | |
| double | cvode_dtmax () const |
| Returns the CVODE contaminant solver maximum time step. More... | |
| bool | setCvode_dtmax (const double cvode_dtmax) |
| Sets the CVODE contaminant solver maximum time step. More... | |
| bool | setCvode_dtmax (const std::string &cvode_dtmax) |
| Sets the CVODE contaminant solver maximum time step. More... | |
| int | tsdens () const |
| Returns the time-varying density flag: 0 = no variation during time step, 1 = vary density during time step. More... | |
| void | setTsdens (const int tsdens) |
| Sets the time-varying density flag: 0 = no variation during time step, 1 = vary density during time step. More... | |
| double | tsrelax () const |
| Returns the (inactive) under-relaxation factor for calculating dM/dt. More... | |
| bool | setTsrelax (const double tsrelax) |
| Sets the (inactive) under-relaxation factor for calculating dM/dt. More... | |
| bool | setTsrelax (const std::string &tsrelax) |
| Sets the (inactive) under-relaxation factor for calculating dM/dt. More... | |
| int | tsmaxi () const |
| Returns the maximum number of iterations for density changes. More... | |
| void | setTsmaxi (const int tsmaxi) |
| Sets the maximum number of iterations for density changes. More... | |
| int | cnvgSS () const |
| Returns the density treatment during steady state initialization: 0 = don't converge, 1 = converge. More... | |
| void | setCnvgSS (const int cnvgSS) |
| Sets the density treatment during steady state initialization: 0 = don't converge, 1 = converge. More... | |
| int | densZP () const |
| Returns the density/zone pressure treatment: 0 = no requirement, 1 = require density = f(zone pressure). More... | |
| void | setDensZP (const int densZP) |
| Sets the density/zone pressure treatment: 0 = no requirement, 1 = require density = f(zone pressure). More... | |
| int | stackD () const |
| Returns the hydrostatic density treatment: 0 = no hydrostatic variation, 1 = density varies hydrostatically. More... | |
| void | setStackD (const int stackD) |
| Sets the hydrostatic density treatment: 0 = no hydrostatic variation, 1 = density varies hydrostatically. More... | |
| int | dodMdt () const |
| Returns the dM/dt treatment: 0 = don't include in airflow calculation, 1 = include in airflow calculation. More... | |
| void | setDodMdt (const int dodMdt) |
| Sets the dM/dt treatment: 0 = don't include in airflow calculation, 1 = include in airflow calculation. More... | |
| std::string | date_st () const |
| Returns the day-of-year to start steady simulation [mmmdd]. More... | |
| void | setDate_st (const std::string &date_st) |
| Sets the day-of-year to start steady simulation [mmmdd]. More... | |
| std::string | time_st () const |
| Returns the time-of-day to start steady simulation [hh:mm:ss]. More... | |
| void | setTime_st (const std::string &time_st) |
| Sets the time-of-day to start steady simulation [hh:mm:ss]. More... | |
| std::string | date_0 () const |
| Returns the day-of-year to start transient simulation [mmmdd]. More... | |
| void | setDate_0 (const std::string &date_0) |
| Sets the day-of-year to start transient simulation [mmmdd]. More... | |
| std::string | time_0 () const |
| Returns the time-of-day to start transient simulation [hh:mm:ss]. More... | |
| void | setTime_0 (const std::string &time_0) |
| Sets the time-of-day to start transient simulation [hh:mm:ss]. More... | |
| std::string | date_1 () const |
| Returns the day-of-year to end transient simulation [mmmdd]. More... | |
| void | setDate_1 (const std::string &date_1) |
| Sets the day-of-year to end transient simulation [mmmdd]. More... | |
| std::string | time_1 () const |
| Returns the time-of-day to end transient simulation [hh:mm:ss]. More... | |
| void | setTime_1 (const std::string &time_1) |
| Sets the time-of-day to end transient simulation [hh:mm:ss]. More... | |
| std::string | time_step () const |
| Returns the simulation time step [hh:mm:ss]. More... | |
| void | setTime_step (const std::string &time_step) |
| Sets the simulation time step [hh:mm:ss]. More... | |
| std::string | time_list () const |
| Returns the simulation output (results) time step [hh:mm:ss]. More... | |
| void | setTime_list (const std::string &time_list) |
| Sets the simulation output (results) time step [hh:mm:ss]. More... | |
| std::string | time_scrn () const |
| Returns simulation status time step (up to 1 day) [hh:mm:ss]. More... | |
| void | setTime_scrn (const std::string &time_scrn) |
| Sets the simulation status time step (up to 1 day) [hh:mm:ss]. More... | |
| int | restart () const |
| Returns the restart file flag: 0 = don't use, 1 = use. More... | |
| void | setRestart (const int restart) |
| Sets the restart file flag: 0 = don't use, 1 = use. More... | |
| std::string | rstdate () const |
| Returns the restart date [mmmdd]. More... | |
| void | setRstdate (const std::string &rstdate) |
| Sets the restart date [mmmdd]. More... | |
| std::string | rsttime () const |
| Returns the restart time [hh:mm:ss]. More... | |
| void | setRsttime (const std::string &rsttime) |
| Sets the restart time [hh:mm:ss]. More... | |
| int | list () const |
| Returns the data dump parameter: > 0 dump matrix analysis, = 2 dump SIM file output, > 2 dump lognotes. More... | |
| void | setList (const int list) |
| Sets the data dump parameter: > 0 dump matrix analysis, = 2 dump SIM file output, > 2 dump lognotes. More... | |
| int | doDlg () const |
| Returns the ContamX dialog box flag: 0 = don't display, 1 = display. More... | |
| void | setDoDlg (const int doDlg) |
| Sets the ContamX dialog box flag: 0 = don't display, 1 = display. More... | |
| int | pfsave () const |
| Returns the path flow results save flag: 0 = don't save, 1 = save to SIM file. More... | |
| void | setPfsave (const int pfsave) |
| Sets the path flow results save flag: 0 = don't save, 1 = save to SIM file. More... | |
| int | zfsave () const |
| Returns zone flow results the save flag: 0 = don't save, 1 = save to SIM file. More... | |
| void | setZfsave (const int zfsave) |
| Sets the zone flow results save flag: 0 = don't save, 1 = save to SIM file. More... | |
| int | zcsave () const |
| Returns the mass fraction results save flag: 0 = don't save, 1 = save to SIM file. More... | |
| void | setZcsave (const int zcsave) |
| Sets the mass fraction results save flag: 0 = don't save, 1 = save to SIM file. More... | |
| int | achvol () const |
| Returns the ACH calculation behavior: 0 = use std volumes, 1 = use true volumes. More... | |
| void | setAchvol (const int achvol) |
| Sets the ACH calculation behavior: 0 = use std volumes, 1 = use true volumes. More... | |
| int | achsave () const |
| Returns building air exchange rate transient data the save flag: 0 = don't save, 1 = save. More... | |
| void | setAchsave (const int achsave) |
| Sets the building air exchange rate transient data save flag: 0 = don't save, 1 = save. More... | |
| int | abwsave () const |
| Returns the air exchange save flag: 0 = don't save, 1 = save. More... | |
| void | setAbwsave (const int abwsave) |
| Sets the air exchange save flag: 0 = don't save, 1 = save. More... | |
| int | cbwsave () const |
| Returns the contaminant box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| void | setCbwsave (const int cbwsave) |
| Sets the contaminant box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| int | expsave () const |
| Returns the exposure transient data save flag: 0 = don't save, 1 = save. More... | |
| void | setExpsave (const int expsave) |
| Sets the exposure transient data save flag: 0 = don't save, 1 = save. More... | |
| int | ebwsave () const |
| Returns the exposure box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| void | setEbwsave (const int ebwsave) |
| Sets the exposure box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| int | zaasave () const |
| Returns the zones age-of-air transient data save flag: 0 = don't save, 1 = save. More... | |
| void | setZaasave (const int zaasave) |
| Sets the zones age-of-air transient data save flag: 0 = don't save, 1 = save. More... | |
| int | zbwsave () const |
| Returns the zones age-of-air box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| void | setZbwsave (const int zbwsave) |
| Sets the zones age-of-air box-whisker data save flag: 0 = don't save, 1 = save. More... | |
| int | rzfsave () const |
| Returns the binary zone flow file flag: 0 = don't save, 1 = save. More... | |
| void | setRzfsave (const int rzfsave) |
| Sets the binary zone flow file flag: 0 = don't save, 1 = save. More... | |
| int | rzmsave () const |
| Returns the binary avg zone mass fraction file flag: 0 = don't save, 1 = save. More... | |
| void | setRzmsave (const int rzmsave) |
| Sets the binary avg zone mass fraction file flag: 0 = don't save, 1 = save. More... | |
| int | rz1save () const |
| Returns the binary 1D zone cell mass fraction file flag: 0 = don't save, 1 = save. More... | |
| void | setRz1save (const int rz1save) |
| Sets the binary 1D zone cell mass fraction file flag: 0 = don't save, 1 = save. More... | |
| int | csmsave () const |
| Returns the text contaminant summary file flag: 0 = don't save, 1 = save. More... | |
| void | setCsmsave (const int csmsave) |
| Sets the text contaminant summary file flag: 0 = don't save, 1 = save. More... | |
| int | srfsave () const |
| Returns the text surface result file flag: 0 = don't save, 1 = save. More... | |
| void | setSrfsave (const int srfsave) |
| Sets the text surface result file flag: 0 = don't save, 1 = save. More... | |
| int | logsave () const |
| Returns the text controls log file flag: 0 = don't save, 1 = save. More... | |
| void | setLogsave (const int logsave) |
| Sets the text controls log file flag: 0 = don't save, 1 = save. More... | |
| std::vector< int > | save () const |
| Returns the save vector - unused by CONTAM and subject to change without notice. More... | |
| void | setSave (const std::vector< int > &save) |
| Sets the save vector - unused by CONTAM and subject to change without notice. More... | |
| std::vector< double > | rvals () const |
| Returns the mysterious rvals vector. More... | |
| bool | setRvals (const std::vector< double > &rvals) |
| Sets the mysterious rvals vector. More... | |
| bool | setRvals (const std::vector< std::string > &rvals) |
| Sets the mysterious rvals vector. More... | |
| int | BldgFlowZ () const |
| Returns the building airflow test (zones) flag: 0 = don't output, 1 = output. More... | |
| void | setBldgFlowZ (const int BldgFlowZ) |
| Sets the building airflow test (zones) flag: 0 = don't output, 1 = output. More... | |
| int | BldgFlowD () const |
| Returns the building airflow test (ducts) flag: 0 = don't output, 1 = output. More... | |
| void | setBldgFlowD (const int BldgFlowD) |
| Sets the building airflow test (ducts) flag: 0 = don't output, 1 = output. More... | |
| int | BldgFlowC () const |
| Returns the building airflow test (classified flows) flag: 0 = don't output, 1 = output. More... | |
| void | setBldgFlowC (const int BldgFlowC) |
| Sets the building airflow test (classified flows) flag: 0 = don't output, 1 = output. More... | |
| int | cfd_ctype () const |
| Returns the cfd coupling method: 0 = no cfd, 1 = post, 2 = quasi, 3 = dynamic. More... | |
| void | setCfd_ctype (const int cfd_ctype) |
| Sets the cfd coupling method: 0 = no cfd, 1 = post, 2 = quasi, 3 = dynamic. More... | |
| double | cfd_convcpl () const |
| Returns the convergence factor for dynamic coupling. More... | |
| bool | setCfd_convcpl (const double cfd_convcpl) |
| Sets the convergence factor for dynamic coupling. More... | |
| bool | setCfd_convcpl (const std::string &cfd_convcpl) |
| Sets the convergence factor for dynamic coupling. More... | |
| int | cfd_var () const |
| Returns the .var file flag: 0 = don't use, 1 = use. More... | |
| void | setCfd_var (const int cfd_var) |
| Sets the .var file flag: 0 = don't use, 1 = use. More... | |
| int | cfd_zref () const |
| Returns the currently unused zref value. More... | |
| void | setCfd_zref (const int cfd_zref) |
| Sets the the currently unused zref value. More... | |
| int | cfd_imax () const |
| Returns the max number of dynamic coupling iterations. More... | |
| void | setCfd_imax (const int cfd_imax) |
| Sets the max number of dynamic coupling iterations. More... | |
| int | cfd_dtcmo () const |
| Returns the number of iterations between outputs to .cmo file. More... | |
| void | setCfd_dtcmo (const int cfd_dtcmo) |
| Sets the number of iterations between outputs to .cmo file. More... | |
The RunControl object stores most of the information related to how CONTAM solves the airflow network problem.
| openstudio::contam::RunControl::RunControl | ( | ) |
Create a new object with default values.
| openstudio::contam::RunControl::RunControl | ( | const RunControl & | other | ) |
Create a new object.
RunControl(int sim_af,int afcalc,int afmaxi,std::string afrcnvg,std::string afacnvg,std::string afrelax,int uac2, std::string Pres,int uPres,int afslae,int afrseq,int aflmaxi,std::string aflcnvg,int aflinit,int Tadj, int sim_mf,int ccmaxi,std::string ccrcnvg,std::string ccacnvg,std::string ccrelax,int uccc,int mfnmthd, int mfnrseq,int mfnmaxi,std::string mfnrcnvg,std::string mfnacnvg,std::string mfnrelax,std::string mfngamma, int uccn,int mftmthd,int mftrseq,int mftmaxi,std::string mftrcnvg,std::string mftacnvg,std::string mftrelax, std::string mftgamma,int ucct,int mfvmthd,int mfvrseq,int mfvmaxi,std::string mfvrcnvg,std::string mfvacnvg, std::string mfvrelax,int uccv,int mf_solver,int sim_1dz,int sim_1dd,std::string celldx,int sim_vjt, int udx,int cvode_mth,std::string cvode_rcnvg,std::string cvode_acnvg,std::string cvode_dtmax,int tsdens, std::string tsrelax,int tsmaxi,int cnvgSS,int densZP,int stackD,int dodMdt,std::string date_st, std::string time_st,std::string date_0,std::string time_0,std::string date_1,std::string time_1,std::string time_step, std::string time_list,std::string time_scrn,int restart,std::string rstdate,std::string rsttime,int list, int doDlg,int pfsave,int zfsave,int zcsave,int achvol,int achsave,int abwsave,int cbwsave, int expsave,int ebwsave,int zaasave,int zbwsave,int rzfsave,int rzmsave,int rz1save, int csmsave,int srfsave,int logsave,std::vector<int> save,std::vector<std::string> rvals,int BldgFlowZ, int BldgFlowD,int BldgFlowC,int cfd_ctype,std::string cfd_convcpl,int cfd_var,int cfd_zref, int cfd_imax,int cfd_dtcmo); Create a new object from another object.
| openstudio::contam::RunControl::~RunControl | ( | ) |
Destroy the object.
| int openstudio::contam::RunControl::abwsave | ( | ) | const |
Returns the air exchange save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::achsave | ( | ) | const |
Returns building air exchange rate transient data the save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::achvol | ( | ) | const |
Returns the ACH calculation behavior: 0 = use std volumes, 1 = use true volumes.
| double openstudio::contam::RunControl::afacnvg | ( | ) | const |
Returns the absolute airflow convergence factor [1/s].
| int openstudio::contam::RunControl::afcalc | ( | ) | const |
Returns the N-R method for non-linear eqns: 0 = SUR, 1 = STR.
| double openstudio::contam::RunControl::aflcnvg | ( | ) | const |
Returns the relative convergence factor for (PCG).
| int openstudio::contam::RunControl::aflinit | ( | ) | const |
Returns the linear airflow initialization flag: 0 = don't use, 1 = use.
| int openstudio::contam::RunControl::aflmaxi | ( | ) | const |
Returns the maximum number of iterations (PCG).
| int openstudio::contam::RunControl::afmaxi | ( | ) | const |
Returns the maximum number of N-R iterations.
| double openstudio::contam::RunControl::afrcnvg | ( | ) | const |
Returns the relative airflow convergence factor.
| double openstudio::contam::RunControl::afrelax | ( | ) | const |
Returns the flow under-relaxation coefficient (for SUR).
| int openstudio::contam::RunControl::afrseq | ( | ) | const |
Returns the linear equation resequence flag: 0 = don't resequence, 1 = resequence.
| int openstudio::contam::RunControl::afslae | ( | ) | const |
Returns the method for linear equations: 0 = SKY, 1 = PCG.
| int openstudio::contam::RunControl::BldgFlowC | ( | ) | const |
Returns the building airflow test (classified flows) flag: 0 = don't output, 1 = output.
| int openstudio::contam::RunControl::BldgFlowD | ( | ) | const |
Returns the building airflow test (ducts) flag: 0 = don't output, 1 = output.
| int openstudio::contam::RunControl::BldgFlowZ | ( | ) | const |
Returns the building airflow test (zones) flag: 0 = don't output, 1 = output.
| int openstudio::contam::RunControl::cbwsave | ( | ) | const |
Returns the contaminant box-whisker data save flag: 0 = don't save, 1 = save.
| double openstudio::contam::RunControl::ccacnvg | ( | ) | const |
Returns the cyclic absolute convergence factor [kg/kg].
| int openstudio::contam::RunControl::ccmaxi | ( | ) | const |
Returns the maximum number of cyclic iterations.
| double openstudio::contam::RunControl::ccrcnvg | ( | ) | const |
Returns the cyclic relative convergence factor.
| double openstudio::contam::RunControl::ccrelax | ( | ) | const |
Returns the cyclic (unused) over-relaxation coefficient.
| double openstudio::contam::RunControl::celldx | ( | ) | const |
Returns the default length of duct cells for C-D model [m].
| double openstudio::contam::RunControl::cfd_convcpl | ( | ) | const |
Returns the convergence factor for dynamic coupling.
| int openstudio::contam::RunControl::cfd_ctype | ( | ) | const |
Returns the cfd coupling method: 0 = no cfd, 1 = post, 2 = quasi, 3 = dynamic.
| int openstudio::contam::RunControl::cfd_dtcmo | ( | ) | const |
Returns the number of iterations between outputs to .cmo file.
| int openstudio::contam::RunControl::cfd_imax | ( | ) | const |
Returns the max number of dynamic coupling iterations.
| int openstudio::contam::RunControl::cfd_var | ( | ) | const |
Returns the .var file flag: 0 = don't use, 1 = use.
| int openstudio::contam::RunControl::cfd_zref | ( | ) | const |
Returns the currently unused zref value.
| int openstudio::contam::RunControl::cnvgSS | ( | ) | const |
Returns the density treatment during steady state initialization: 0 = don't converge, 1 = converge.
| int openstudio::contam::RunControl::csmsave | ( | ) | const |
Returns the text contaminant summary file flag: 0 = don't save, 1 = save.
| double openstudio::contam::RunControl::cvode_acnvg | ( | ) | const |
Returns the CVODE contaminant solver multi-step absolute convergence factor.
| double openstudio::contam::RunControl::cvode_dtmax | ( | ) | const |
Returns the CVODE contaminant solver maximum time step.
| int openstudio::contam::RunControl::cvode_mth | ( | ) | const |
Returns the CVODE contaminant solver multi-step method: 0 = am, 1 = bdf.
| double openstudio::contam::RunControl::cvode_rcnvg | ( | ) | const |
Returns the CVODE contaminant solver multi-step relative convergence factor.
| std::string openstudio::contam::RunControl::date_0 | ( | ) | const |
Returns the day-of-year to start transient simulation [mmmdd].
| std::string openstudio::contam::RunControl::date_1 | ( | ) | const |
Returns the day-of-year to end transient simulation [mmmdd].
| std::string openstudio::contam::RunControl::date_st | ( | ) | const |
Returns the day-of-year to start steady simulation [mmmdd].
| int openstudio::contam::RunControl::densZP | ( | ) | const |
Returns the density/zone pressure treatment: 0 = no requirement, 1 = require density = f(zone pressure).
| int openstudio::contam::RunControl::doDlg | ( | ) | const |
Returns the ContamX dialog box flag: 0 = don't display, 1 = display.
| int openstudio::contam::RunControl::dodMdt | ( | ) | const |
Returns the dM/dt treatment: 0 = don't include in airflow calculation, 1 = include in airflow calculation.
| int openstudio::contam::RunControl::ebwsave | ( | ) | const |
Returns the exposure box-whisker data save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::expsave | ( | ) | const |
Returns the exposure transient data save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::list | ( | ) | const |
Returns the data dump parameter: > 0 dump matrix analysis, = 2 dump SIM file output, > 2 dump lognotes.
| int openstudio::contam::RunControl::logsave | ( | ) | const |
Returns the text controls log file flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::mf_solver | ( | ) | const |
Returns the mass fraction integration method: 0 = trapezoid, 1 = STS, 2 = CVODE.
| double openstudio::contam::RunControl::mfnacnvg | ( | ) | const |
Returns the non-trace contaminant absolute convergence factor.
| double openstudio::contam::RunControl::mfngamma | ( | ) | const |
Returns the non-trace contaminant trapezoidal integration factor.
| int openstudio::contam::RunControl::mfnmaxi | ( | ) | const |
Returns the non-trace contaminant maximum iterations.
| int openstudio::contam::RunControl::mfnmthd | ( | ) | const |
Returns the non-trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU.
| double openstudio::contam::RunControl::mfnrcnvg | ( | ) | const |
Returns the non-trace contaminant relative convergence factor.
| double openstudio::contam::RunControl::mfnrelax | ( | ) | const |
Returns the non-trace contaminant relaxation coefficient.
| int openstudio::contam::RunControl::mfnrseq | ( | ) | const |
Returns the non-trace contaminant resequence flag: 0 = don't resequence, 1 = resequence.
| double openstudio::contam::RunControl::mftacnvg | ( | ) | const |
Returns the trace contaminant absolute convergence factor.
| double openstudio::contam::RunControl::mftgamma | ( | ) | const |
Returns the trace contaminant trapezoidal integration factor.
| int openstudio::contam::RunControl::mftmaxi | ( | ) | const |
Returns the trace contaminant maximum iterations.
| int openstudio::contam::RunControl::mftmthd | ( | ) | const |
Returns the trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU.
| double openstudio::contam::RunControl::mftrcnvg | ( | ) | const |
Returns the trace contaminant relative convergence factor.
| double openstudio::contam::RunControl::mftrelax | ( | ) | const |
Returns the trace contaminant relaxation coefficient.
| int openstudio::contam::RunControl::mftrseq | ( | ) | const |
Returns the trace contaminant resequence flag: 0 = don't resequence, 1 = resequence.
| double openstudio::contam::RunControl::mfvacnvg | ( | ) | const |
Returns the CVODE contaminant solver absolute convergence factor.
| int openstudio::contam::RunControl::mfvmaxi | ( | ) | const |
Returns the CVODE contaminant solver maximum iterations.
| int openstudio::contam::RunControl::mfvmthd | ( | ) | const |
Returns the CVODE contaminant solver method: 0 = SKY, 2 = SOR, 3 = LU.
| double openstudio::contam::RunControl::mfvrcnvg | ( | ) | const |
Returns the CVODE contaminant solver relative convergence factor.
| double openstudio::contam::RunControl::mfvrelax | ( | ) | const |
Returns the CVODE contaminant solver relaxation coefficient.
| int openstudio::contam::RunControl::mfvrseq | ( | ) | const |
Returns the CVODE contaminant solver resequence flag: 0 = don't resequence, 1 = resequence.
| bool openstudio::contam::RunControl::operator!= | ( | const RunControl & | other | ) | const |
Inequality operator.
| RunControl& openstudio::contam::RunControl::operator= | ( | const RunControl & | other | ) |
Copy operator.
| bool openstudio::contam::RunControl::operator== | ( | const RunControl & | other | ) | const |
Equality operator.
| int openstudio::contam::RunControl::pfsave | ( | ) | const |
Returns the path flow results save flag: 0 = don't save, 1 = save to SIM file.
| double openstudio::contam::RunControl::Pres | ( | ) | const |
Returns the pressure test pressure.
| int openstudio::contam::RunControl::restart | ( | ) | const |
Returns the restart file flag: 0 = don't use, 1 = use.
| std::string openstudio::contam::RunControl::rstdate | ( | ) | const |
Returns the restart date [mmmdd].
| std::string openstudio::contam::RunControl::rsttime | ( | ) | const |
Returns the restart time [hh:mm:ss].
| std::vector<double> openstudio::contam::RunControl::rvals | ( | ) | const |
Returns the mysterious rvals vector.
| int openstudio::contam::RunControl::rz1save | ( | ) | const |
Returns the binary 1D zone cell mass fraction file flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::rzfsave | ( | ) | const |
Returns the binary zone flow file flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::rzmsave | ( | ) | const |
Returns the binary avg zone mass fraction file flag: 0 = don't save, 1 = save.
| std::vector<int> openstudio::contam::RunControl::save | ( | ) | const |
Returns the save vector - unused by CONTAM and subject to change without notice.
| void openstudio::contam::RunControl::setAbwsave | ( | const int | abwsave | ) |
Sets the air exchange save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setAchsave | ( | const int | achsave | ) |
Sets the building air exchange rate transient data save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setAchvol | ( | const int | achvol | ) |
Sets the ACH calculation behavior: 0 = use std volumes, 1 = use true volumes.
| bool openstudio::contam::RunControl::setAfacnvg | ( | const double | afacnvg | ) |
Sets the absolute airflow convergence factor [1/s].
| bool openstudio::contam::RunControl::setAfacnvg | ( | const std::string & | afacnvg | ) |
Sets the absolute airflow convergence factor [1/s].
| void openstudio::contam::RunControl::setAfcalc | ( | const int | afcalc | ) |
Sets the N-R method for non-linear eqns: 0 = SUR, 1 = STR.
| bool openstudio::contam::RunControl::setAflcnvg | ( | const double | aflcnvg | ) |
Sets the relative convergence factor for (PCG).
| bool openstudio::contam::RunControl::setAflcnvg | ( | const std::string & | aflcnvg | ) |
Sets the relative convergence factor for (PCG).
| void openstudio::contam::RunControl::setAflinit | ( | const int | aflinit | ) |
Sets the linear airflow initialization flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setAflmaxi | ( | const int | aflmaxi | ) |
Sets the maximum number of iterations (PCG).
| void openstudio::contam::RunControl::setAfmaxi | ( | const int | afmaxi | ) |
Sets the maximum number of N-R iterations.
| bool openstudio::contam::RunControl::setAfrcnvg | ( | const double | afrcnvg | ) |
Sets the relative airflow convergence factor.
| bool openstudio::contam::RunControl::setAfrcnvg | ( | const std::string & | afrcnvg | ) |
Sets the relative airflow convergence factor.
| bool openstudio::contam::RunControl::setAfrelax | ( | const double | afrelax | ) |
Sets the flow under-relaxation coefficient (for SUR).
| bool openstudio::contam::RunControl::setAfrelax | ( | const std::string & | afrelax | ) |
Sets the flow under-relaxation coefficient (for SUR).
| void openstudio::contam::RunControl::setAfrseq | ( | const int | afrseq | ) |
Sets the linear equation resequence flag: 0 = don't resequence, 1 = resequence.
| void openstudio::contam::RunControl::setAfslae | ( | const int | afslae | ) |
Sets the method for linear equations: 0 = SKY, 1 = PCG.
| void openstudio::contam::RunControl::setBldgFlowC | ( | const int | BldgFlowC | ) |
Sets the building airflow test (classified flows) flag: 0 = don't output, 1 = output.
| void openstudio::contam::RunControl::setBldgFlowD | ( | const int | BldgFlowD | ) |
Sets the building airflow test (ducts) flag: 0 = don't output, 1 = output.
| void openstudio::contam::RunControl::setBldgFlowZ | ( | const int | BldgFlowZ | ) |
Sets the building airflow test (zones) flag: 0 = don't output, 1 = output.
| void openstudio::contam::RunControl::setCbwsave | ( | const int | cbwsave | ) |
Sets the contaminant box-whisker data save flag: 0 = don't save, 1 = save.
| bool openstudio::contam::RunControl::setCcacnvg | ( | const double | ccacnvg | ) |
Sets the cyclic absolute convergence factor [kg/kg].
| bool openstudio::contam::RunControl::setCcacnvg | ( | const std::string & | ccacnvg | ) |
Sets the cyclic absolute convergence factor [kg/kg].
| void openstudio::contam::RunControl::setCcmaxi | ( | const int | ccmaxi | ) |
Sets the maximum number of cyclic iterations.
| bool openstudio::contam::RunControl::setCcrcnvg | ( | const double | ccrcnvg | ) |
Sets the cyclic relative convergence factor.
| bool openstudio::contam::RunControl::setCcrcnvg | ( | const std::string & | ccrcnvg | ) |
Sets the cyclic relative convergence factor.
| bool openstudio::contam::RunControl::setCcrelax | ( | const double | ccrelax | ) |
Sets the cyclic (unused) over-relaxation coefficient.
| bool openstudio::contam::RunControl::setCcrelax | ( | const std::string & | ccrelax | ) |
Sets the cyclic (unused) over-relaxation coefficient.
| bool openstudio::contam::RunControl::setCelldx | ( | const double | celldx | ) |
Sets the default length of duct cells for C-D model [m].
| bool openstudio::contam::RunControl::setCelldx | ( | const std::string & | celldx | ) |
Sets the default length of duct cells for C-D model [m].
| bool openstudio::contam::RunControl::setCfd_convcpl | ( | const double | cfd_convcpl | ) |
Sets the convergence factor for dynamic coupling.
| bool openstudio::contam::RunControl::setCfd_convcpl | ( | const std::string & | cfd_convcpl | ) |
Sets the convergence factor for dynamic coupling.
| void openstudio::contam::RunControl::setCfd_ctype | ( | const int | cfd_ctype | ) |
Sets the cfd coupling method: 0 = no cfd, 1 = post, 2 = quasi, 3 = dynamic.
| void openstudio::contam::RunControl::setCfd_dtcmo | ( | const int | cfd_dtcmo | ) |
Sets the number of iterations between outputs to .cmo file.
| void openstudio::contam::RunControl::setCfd_imax | ( | const int | cfd_imax | ) |
Sets the max number of dynamic coupling iterations.
| void openstudio::contam::RunControl::setCfd_var | ( | const int | cfd_var | ) |
Sets the .var file flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setCfd_zref | ( | const int | cfd_zref | ) |
Sets the the currently unused zref value.
| void openstudio::contam::RunControl::setCnvgSS | ( | const int | cnvgSS | ) |
Sets the density treatment during steady state initialization: 0 = don't converge, 1 = converge.
| void openstudio::contam::RunControl::setCsmsave | ( | const int | csmsave | ) |
Sets the text contaminant summary file flag: 0 = don't save, 1 = save.
| bool openstudio::contam::RunControl::setCvode_acnvg | ( | const double | cvode_acnvg | ) |
Sets the CVODE contaminant solver multi-step absolute convergence factor.
| bool openstudio::contam::RunControl::setCvode_acnvg | ( | const std::string & | cvode_acnvg | ) |
Sets the CVODE contaminant solver multi-step absolute convergence factor.
| bool openstudio::contam::RunControl::setCvode_dtmax | ( | const double | cvode_dtmax | ) |
Sets the CVODE contaminant solver maximum time step.
| bool openstudio::contam::RunControl::setCvode_dtmax | ( | const std::string & | cvode_dtmax | ) |
Sets the CVODE contaminant solver maximum time step.
| void openstudio::contam::RunControl::setCvode_mth | ( | const int | cvode_mth | ) |
Sets the CVODE contaminant solver multi-step method: 0 = am, 1 = bdf.
| bool openstudio::contam::RunControl::setCvode_rcnvg | ( | const double | cvode_rcnvg | ) |
Sets the CVODE contaminant solver multi-step relative convergence factor.
| bool openstudio::contam::RunControl::setCvode_rcnvg | ( | const std::string & | cvode_rcnvg | ) |
Sets the CVODE contaminant solver multi-step relative convergence factor.
| void openstudio::contam::RunControl::setDate_0 | ( | const std::string & | date_0 | ) |
Sets the day-of-year to start transient simulation [mmmdd].
| void openstudio::contam::RunControl::setDate_1 | ( | const std::string & | date_1 | ) |
Sets the day-of-year to end transient simulation [mmmdd].
| void openstudio::contam::RunControl::setDate_st | ( | const std::string & | date_st | ) |
Sets the day-of-year to start steady simulation [mmmdd].
| void openstudio::contam::RunControl::setDensZP | ( | const int | densZP | ) |
Sets the density/zone pressure treatment: 0 = no requirement, 1 = require density = f(zone pressure).
| void openstudio::contam::RunControl::setDoDlg | ( | const int | doDlg | ) |
Sets the ContamX dialog box flag: 0 = don't display, 1 = display.
| void openstudio::contam::RunControl::setDodMdt | ( | const int | dodMdt | ) |
Sets the dM/dt treatment: 0 = don't include in airflow calculation, 1 = include in airflow calculation.
| void openstudio::contam::RunControl::setEbwsave | ( | const int | ebwsave | ) |
Sets the exposure box-whisker data save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setExpsave | ( | const int | expsave | ) |
Sets the exposure transient data save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setList | ( | const int | list | ) |
Sets the data dump parameter: > 0 dump matrix analysis, = 2 dump SIM file output, > 2 dump lognotes.
| void openstudio::contam::RunControl::setLogsave | ( | const int | logsave | ) |
Sets the text controls log file flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setMf_solver | ( | const int | mf_solver | ) |
Sets the mass fraction integration method: 0 = trapezoid, 1 = STS, 2 = CVODE.
| bool openstudio::contam::RunControl::setMfnacnvg | ( | const double | mfnacnvg | ) |
Sets the non-trace contaminant absolute convergence factor.
| bool openstudio::contam::RunControl::setMfnacnvg | ( | const std::string & | mfnacnvg | ) |
Sets the non-trace contaminant absolute convergence factor.
| bool openstudio::contam::RunControl::setMfngamma | ( | const double | mfngamma | ) |
Sets the non-trace contaminant trapezoidal integration factor.
| bool openstudio::contam::RunControl::setMfngamma | ( | const std::string & | mfngamma | ) |
Sets the non-trace contaminant trapezoidal integration factor.
| void openstudio::contam::RunControl::setMfnmaxi | ( | const int | mfnmaxi | ) |
Sets the non-trace contaminant maximum iterations.
| void openstudio::contam::RunControl::setMfnmthd | ( | const int | mfnmthd | ) |
Sets the non-trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU.
| bool openstudio::contam::RunControl::setMfnrcnvg | ( | const double | mfnrcnvg | ) |
Sets the non-trace contaminant relative convergence factor.
| bool openstudio::contam::RunControl::setMfnrcnvg | ( | const std::string & | mfnrcnvg | ) |
Sets the non-trace contaminant relative convergence factor.
| bool openstudio::contam::RunControl::setMfnrelax | ( | const double | mfnrelax | ) |
Sets the non-trace contaminant relaxation coefficient.
| bool openstudio::contam::RunControl::setMfnrelax | ( | const std::string & | mfnrelax | ) |
Sets the non-trace contaminant relaxation coefficient.
| void openstudio::contam::RunControl::setMfnrseq | ( | const int | mfnrseq | ) |
Sets the non-trace contaminant resequence flag: 0 = don't resequence, 1 = resequence.
| bool openstudio::contam::RunControl::setMftacnvg | ( | const double | mftacnvg | ) |
Sets the trace contaminant absolute convergence factor.
| bool openstudio::contam::RunControl::setMftacnvg | ( | const std::string & | mftacnvg | ) |
Sets the trace contaminant absolute convergence factor.
| bool openstudio::contam::RunControl::setMftgamma | ( | const double | mftgamma | ) |
Sets the trace contaminant trapezoidal integration factor.
| bool openstudio::contam::RunControl::setMftgamma | ( | const std::string & | mftgamma | ) |
Sets the trace contaminant trapezoidal integration factor.
| void openstudio::contam::RunControl::setMftmaxi | ( | const int | mftmaxi | ) |
Sets the trace contaminant maximum iterations.
| void openstudio::contam::RunControl::setMftmthd | ( | const int | mftmthd | ) |
Sets the trace contaminant simulation method: 0 = SKY, 1 = BCG, 2 = SOR, 3 = LU.
| bool openstudio::contam::RunControl::setMftrcnvg | ( | const double | mftrcnvg | ) |
Sets the trace contaminant relative convergence factor.
| bool openstudio::contam::RunControl::setMftrcnvg | ( | const std::string & | mftrcnvg | ) |
Sets the trace contaminant relative convergence factor.
| bool openstudio::contam::RunControl::setMftrelax | ( | const double | mftrelax | ) |
Sets the trace contaminant relaxation coefficient.
| bool openstudio::contam::RunControl::setMftrelax | ( | const std::string & | mftrelax | ) |
Sets the trace contaminant relaxation coefficient.
| void openstudio::contam::RunControl::setMftrseq | ( | const int | mftrseq | ) |
Sets the trace contaminant resequence flag: 0 = don't resequence, 1 = resequence.
| bool openstudio::contam::RunControl::setMfvacnvg | ( | const double | mfvacnvg | ) |
Sets the CVODE contaminant solver absolute convergence factor.
| bool openstudio::contam::RunControl::setMfvacnvg | ( | const std::string & | mfvacnvg | ) |
Sets the CVODE contaminant solver absolute convergence factor.
| void openstudio::contam::RunControl::setMfvmaxi | ( | const int | mfvmaxi | ) |
Sets the CVODE contaminant solver maximum iterations.
| void openstudio::contam::RunControl::setMfvmthd | ( | const int | mfvmthd | ) |
Sets the CVODE contaminant solver method: 0 = SKY, 2 = SOR, 3 = LU.
| bool openstudio::contam::RunControl::setMfvrcnvg | ( | const double | mfvrcnvg | ) |
Sets the CVODE contaminant solver relative convergence factor.
| bool openstudio::contam::RunControl::setMfvrcnvg | ( | const std::string & | mfvrcnvg | ) |
Sets the CVODE contaminant solver relative convergence factor.
| bool openstudio::contam::RunControl::setMfvrelax | ( | const double | mfvrelax | ) |
Sets the CVODE contaminant solver relaxation coefficient.
| bool openstudio::contam::RunControl::setMfvrelax | ( | const std::string & | mfvrelax | ) |
Sets the CVODE contaminant solver relaxation coefficient.
| void openstudio::contam::RunControl::setMfvrseq | ( | const int | mfvrseq | ) |
Sets the CVODE contaminant solver resequence flag: 0 = don't resequence, 1 = resequence.
| void openstudio::contam::RunControl::setPfsave | ( | const int | pfsave | ) |
Sets the path flow results save flag: 0 = don't save, 1 = save to SIM file.
| bool openstudio::contam::RunControl::setPres | ( | const double | Pres | ) |
Sets the pressure test pressure.
| bool openstudio::contam::RunControl::setPres | ( | const std::string & | Pres | ) |
Sets the pressure test pressure.
| void openstudio::contam::RunControl::setRestart | ( | const int | restart | ) |
Sets the restart file flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setRstdate | ( | const std::string & | rstdate | ) |
Sets the restart date [mmmdd].
| void openstudio::contam::RunControl::setRsttime | ( | const std::string & | rsttime | ) |
Sets the restart time [hh:mm:ss].
| bool openstudio::contam::RunControl::setRvals | ( | const std::vector< double > & | rvals | ) |
Sets the mysterious rvals vector.
| bool openstudio::contam::RunControl::setRvals | ( | const std::vector< std::string > & | rvals | ) |
Sets the mysterious rvals vector.
| void openstudio::contam::RunControl::setRz1save | ( | const int | rz1save | ) |
Sets the binary 1D zone cell mass fraction file flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setRzfsave | ( | const int | rzfsave | ) |
Sets the binary zone flow file flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setRzmsave | ( | const int | rzmsave | ) |
Sets the binary avg zone mass fraction file flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setSave | ( | const std::vector< int > & | save | ) |
Sets the save vector - unused by CONTAM and subject to change without notice.
| void openstudio::contam::RunControl::setSim_1dd | ( | const int | sim_1dd | ) |
Sets the 1D duct flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setSim_1dz | ( | const int | sim_1dz | ) |
Sets the 1D zone flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setSim_af | ( | const int | sim_af | ) |
Sets the airflow simulation flag: 0 = steady, 1 = dynamic.
| void openstudio::contam::RunControl::setSim_mf | ( | const int | sim_mf | ) |
Sets the mass fraction (contaminant) simulation method: 0 = none, 1 = steady, 2 = transient, 3 = cyclic.
| void openstudio::contam::RunControl::setSim_vjt | ( | const int | sim_vjt | ) |
Sets the variable junction temperature flag: 0 = don't compute, 1 = compute.
| void openstudio::contam::RunControl::setSrfsave | ( | const int | srfsave | ) |
Sets the text surface result file flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setStackD | ( | const int | stackD | ) |
Sets the hydrostatic density treatment: 0 = no hydrostatic variation, 1 = density varies hydrostatically.
| void openstudio::contam::RunControl::setTadj | ( | const int | Tadj | ) |
Sets the temperature adjustment flag: 0 = don't use, 1 = use.
| void openstudio::contam::RunControl::setTime_0 | ( | const std::string & | time_0 | ) |
Sets the time-of-day to start transient simulation [hh:mm:ss].
| void openstudio::contam::RunControl::setTime_1 | ( | const std::string & | time_1 | ) |
Sets the time-of-day to end transient simulation [hh:mm:ss].
| void openstudio::contam::RunControl::setTime_list | ( | const std::string & | time_list | ) |
Sets the simulation output (results) time step [hh:mm:ss].
| void openstudio::contam::RunControl::setTime_scrn | ( | const std::string & | time_scrn | ) |
Sets the simulation status time step (up to 1 day) [hh:mm:ss].
| void openstudio::contam::RunControl::setTime_st | ( | const std::string & | time_st | ) |
Sets the time-of-day to start steady simulation [hh:mm:ss].
| void openstudio::contam::RunControl::setTime_step | ( | const std::string & | time_step | ) |
Sets the simulation time step [hh:mm:ss].
| void openstudio::contam::RunControl::setTsdens | ( | const int | tsdens | ) |
Sets the time-varying density flag: 0 = no variation during time step, 1 = vary density during time step.
| void openstudio::contam::RunControl::setTsmaxi | ( | const int | tsmaxi | ) |
Sets the maximum number of iterations for density changes.
| bool openstudio::contam::RunControl::setTsrelax | ( | const double | tsrelax | ) |
Sets the (inactive) under-relaxation factor for calculating dM/dt.
| bool openstudio::contam::RunControl::setTsrelax | ( | const std::string & | tsrelax | ) |
Sets the (inactive) under-relaxation factor for calculating dM/dt.
| void openstudio::contam::RunControl::setUac2 | ( | const int | uac2 | ) |
Sets the display units for afacnvg.
| void openstudio::contam::RunControl::setUccc | ( | const int | uccc | ) |
Sets the display units for ccacnvg.
| void openstudio::contam::RunControl::setUccn | ( | const int | uccn | ) |
Sets the display units for mfnacnvg.
| void openstudio::contam::RunControl::setUcct | ( | const int | ucct | ) |
Sets the display units for mfnacnvg.
| void openstudio::contam::RunControl::setUccv | ( | const int | uccv | ) |
Sets the display units for mfvacnvg.
| void openstudio::contam::RunControl::setUdx | ( | const int | udx | ) |
Sets the display units of celldx.
| void openstudio::contam::RunControl::setUPres | ( | const int | uPres | ) |
Sets the pressure test pressure.
| void openstudio::contam::RunControl::setZaasave | ( | const int | zaasave | ) |
Sets the zones age-of-air transient data save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setZbwsave | ( | const int | zbwsave | ) |
Sets the zones age-of-air box-whisker data save flag: 0 = don't save, 1 = save.
| void openstudio::contam::RunControl::setZcsave | ( | const int | zcsave | ) |
Sets the mass fraction results save flag: 0 = don't save, 1 = save to SIM file.
| void openstudio::contam::RunControl::setZfsave | ( | const int | zfsave | ) |
Sets the zone flow results save flag: 0 = don't save, 1 = save to SIM file.
| int openstudio::contam::RunControl::sim_1dd | ( | ) | const |
Returns the 1D duct flag: 0 = don't use, 1 = use.
| int openstudio::contam::RunControl::sim_1dz | ( | ) | const |
Returns the 1D zone flag: 0 = don't use, 1 = use.
| int openstudio::contam::RunControl::sim_af | ( | ) | const |
Returns the airflow simulation flag: 0 = steady, 1 = dynamic.
| int openstudio::contam::RunControl::sim_mf | ( | ) | const |
Returns the mass fraction (contaminant) simulation method: 0 = none, 1 = steady, 2 = transient, 3 = cyclic.
| int openstudio::contam::RunControl::sim_vjt | ( | ) | const |
Returns the variable junction temperature flag: 0 = don't compute, 1 = compute.
| int openstudio::contam::RunControl::srfsave | ( | ) | const |
Returns the text surface result file flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::stackD | ( | ) | const |
Returns the hydrostatic density treatment: 0 = no hydrostatic variation, 1 = density varies hydrostatically.
| int openstudio::contam::RunControl::Tadj | ( | ) | const |
Returns the temperature adjustment flag: 0 = don't use, 1 = use.
| std::string openstudio::contam::RunControl::time_0 | ( | ) | const |
Returns the time-of-day to start transient simulation [hh:mm:ss].
| std::string openstudio::contam::RunControl::time_1 | ( | ) | const |
Returns the time-of-day to end transient simulation [hh:mm:ss].
| std::string openstudio::contam::RunControl::time_list | ( | ) | const |
Returns the simulation output (results) time step [hh:mm:ss].
| std::string openstudio::contam::RunControl::time_scrn | ( | ) | const |
Returns simulation status time step (up to 1 day) [hh:mm:ss].
| std::string openstudio::contam::RunControl::time_st | ( | ) | const |
Returns the time-of-day to start steady simulation [hh:mm:ss].
| std::string openstudio::contam::RunControl::time_step | ( | ) | const |
Returns the simulation time step [hh:mm:ss].
| int openstudio::contam::RunControl::tsdens | ( | ) | const |
Returns the time-varying density flag: 0 = no variation during time step, 1 = vary density during time step.
| int openstudio::contam::RunControl::tsmaxi | ( | ) | const |
Returns the maximum number of iterations for density changes.
| double openstudio::contam::RunControl::tsrelax | ( | ) | const |
Returns the (inactive) under-relaxation factor for calculating dM/dt.
| int openstudio::contam::RunControl::uac2 | ( | ) | const |
Returns the display units for afacnvg.
| int openstudio::contam::RunControl::uccc | ( | ) | const |
Returns the display units for ccacnvg.
| int openstudio::contam::RunControl::uccn | ( | ) | const |
Returns the display units for mfnacnvg.
| int openstudio::contam::RunControl::ucct | ( | ) | const |
Returns the display units for mfnacnvg.
| int openstudio::contam::RunControl::uccv | ( | ) | const |
Returns the display units for mfvacnvg.
| int openstudio::contam::RunControl::udx | ( | ) | const |
Returns the display units of celldx.
| int openstudio::contam::RunControl::uPres | ( | ) | const |
Returns the display units of pressure test pressure.
| std::string openstudio::contam::RunControl::write | ( | ) |
Write the object to a string.
| int openstudio::contam::RunControl::zaasave | ( | ) | const |
Returns the zones age-of-air transient data save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::zbwsave | ( | ) | const |
Returns the zones age-of-air box-whisker data save flag: 0 = don't save, 1 = save.
| int openstudio::contam::RunControl::zcsave | ( | ) | const |
Returns the mass fraction results save flag: 0 = don't save, 1 = save to SIM file.
| int openstudio::contam::RunControl::zfsave | ( | ) | const |
Returns zone flow results the save flag: 0 = don't save, 1 = save to SIM file.