#include <AirflowNetworkSimulationControl.hpp>
Public Member Functions | |
virtual | ~AirflowNetworkSimulationControl () |
Getters | |
boost::optional< std::string > | airflowNetworkControl () const |
Determines the type of AirflowNetwork simulation that will be run. More... | |
bool | isAirflowNetworkControlDefaulted () const |
Returns true if the type of AirflowNetwork simulation is defaulted. More... | |
boost::optional< std::string > | windPressureCoefficientType () const |
bool | isWindPressureCoefficientTypeDefaulted () const |
Returns true if the wind pressure treatment is defaulted. More... | |
boost::optional< std::string > | heightSelectionforLocalWindPressureCalculation () const |
bool | isHeightSelectionforLocalWindPressureCalculationDefaulted () const |
Returns true if the height selection procedure is defaulted. More... | |
boost::optional< std::string > | buildingType () const |
General building type, used only if Wind Pressure Coefficient Type = SurfaceAverageCalculation. More... | |
bool | isBuildingTypeDefaulted () const |
Returns true if the building type is defaulted. More... | |
boost::optional< int > | maximumNumberofIterations () const |
Determines the maximum number of iterations used to converge on a solution. More... | |
bool | isMaximumNumberofIterationsDefaulted () const |
Returns true if the maximum number of iterations is defaulted. More... | |
boost::optional< std::string > | initializationType () const |
Determines how the network equations are initialized. More... | |
bool | isInitializationTypeDefaulted () const |
Returns true if the initialization type is defaulted. More... | |
boost::optional< double > | relativeAirflowConvergenceTolerance () const |
This tolerance is defined as the absolute value of the sum of the mass flow rates divided by the sum of the absolute value of the mass Flow Rates. More... | |
bool | isRelativeAirflowConvergenceToleranceDefaulted () const |
Returns true if the relative convergence tolerance is defaulted. More... | |
boost::optional< double > | absoluteAirflowConvergenceTolerance () const |
This tolerance is defined as the absolute value of the sum of the mass flow rates. More... | |
bool | isAbsoluteAirflowConvergenceToleranceDefaulted () const |
Returns true if the absolute convergence tolerance is defaulted. More... | |
boost::optional< double > | convergenceAccelerationLimit () const |
Used only for AirflowNetwork:SimulationControl. More... | |
bool | isConvergenceAccelerationLimitDefaulted () const |
Returns true if the convergence acceleration limit is defaulted. More... | |
boost::optional< double > | azimuthAngleofLongAxisofBuilding () const |
Azimuth angle of long axis of building in degrees clockwise from true North. More... | |
bool | isAzimuthAngleofLongAxisofBuildingDefaulted () const |
Returns true if the azimuth angle of long axis is defaulted. More... | |
boost::optional< double > | buildingAspectRatio () const |
Ratio of building width along short axis to width along long axis. More... | |
bool | isBuildingAspectRatioDefaulted () const |
Returns true if the ratio of the building width to length is defaulted. More... | |
bool | heightDependenceofExternalNodeTemperature () const |
Returns true if the temperature of external nodes will be computed based on height. More... | |
bool | isHeightDependenceofExternalNodeTemperatureDefaulted () const |
Returns true if the external nodes temperature computation type is defaulted. More... | |
Setters | |
bool | setAirflowNetworkControl (std::string airflowNetworkControl) |
Sets the airflow network control type. More... | |
void | resetAirflowNetworkControl () |
Resets the airflow network control type. More... | |
bool | setWindPressureCoefficientType (std::string type) |
Sets the wind pressure coefficient type. More... | |
void | resetWindPressureCoefficientType () |
Resets the wind pressure coefficient type. More... | |
bool | setHeightSelectionforLocalWindPressureCalculation (std::string height) |
Sets the height selection procedure. More... | |
void | resetHeightSelectionforLocalWindPressureCalculation () |
Resets the height selection procedure. More... | |
bool | setBuildingType (std::string type) |
Sets the building type. More... | |
void | resetBuildingType () |
Resets the building type. More... | |
bool | setMaximumNumberofIterations (int number) |
Sets the maximum number of iteration. More... | |
void | resetMaximumNumberofIterations () |
Resets the maximum number of iteration. More... | |
bool | setInitializationType (std::string type) |
Sets the initialization type. More... | |
void | resetInitializationType () |
Resets the initialization type. More... | |
bool | setRelativeAirflowConvergenceTolerance (double tolerance) |
Sets the relative airflow convergence tolerance. More... | |
void | resetRelativeAirflowConvergenceTolerance () |
Resets the relative airflow convergence tolerance. More... | |
bool | setAbsoluteAirflowConvergenceTolerance (double tolerance) |
Sets the absolute airflow convergence tolerance. More... | |
void | resetAbsoluteAirflowConvergenceTolerance () |
Resets the absolute airflow convergence tolerance. More... | |
bool | setConvergenceAccelerationLimit (double limit) |
Sets the convergence acceleration limit. More... | |
void | resetConvergenceAccelerationLimit () |
Resets the convergence acceleration limit. More... | |
bool | setAzimuthAngleofLongAxisofBuilding (double angle) |
Sets the azimuthal angle of the building. More... | |
void | resetAzimuthAngleofLongAxisofBuilding () |
Resets the azimuthal angle of the building. More... | |
bool | setBuildingAspectRatio (double ratio) |
Sets the building aspect ratio. More... | |
void | resetBuildingAspectRatio () |
Resets the building aspect ratio. More... | |
bool | setHeightDependenceofExternalNodeTemperature (bool tf) |
Sets the external nodes temperature computation type. More... | |
void | resetHeightDependenceofExternalNodeTemperature () |
Resets the external nodes temperature computation type. More... | |
Public Member Functions inherited from openstudio::model::ParentObject | |
std::vector< IddObjectType > | allowableChildTypes () const |
Returns a vector of allowable children types. More... | |
std::vector< ModelObject > | children () const |
Return direct child objects in the Model. More... | |
virtual | ~ParentObject () |
Public Member Functions inherited from openstudio::model::ModelObject | |
virtual | ~ModelObject () |
ModelObject | clone () const |
Creates a deep copy of this object, placing it in this object's model(). More... | |
ModelObject | clone (Model model) const |
Creates a deep copy of this object, placing it in model. More... | |
Component | createComponent () const |
Method for creating sharable Model snippets. More... | |
Model | model () const |
Returns the Model that contains this object. More... | |
boost::optional< ParentObject > | parent () const |
Return this object's parent in the hierarchy, if it has one. More... | |
std::vector< ResourceObject > | resources () const |
Get the resources directly used by this ModelObject. More... | |
template<typename T > | |
std::vector< T > | getModelObjectSources () const |
Get all objects of type T that point to this object. More... | |
template<typename T > | |
std::vector< T > | getModelObjectSources (IddObjectType iddObjectType) const |
Get all objects of type T that point to this object. More... | |
template<typename T > | |
boost::optional< T > | getModelObjectTarget (unsigned index) const |
Get the object of type T pointed to by this object from field index. More... | |
template<typename T > | |
std::vector< T > | getModelObjectTargets () const |
Get all objects of type T to which this object points. More... | |
const std::vector< std::string > & | outputVariableNames () const |
Get all output variables names that could be associated with this object. More... | |
std::vector< OutputVariable > | outputVariables () const |
Get all output variables associated with this object, must run simulation to generate data. More... | |
boost::optional < openstudio::TimeSeries > | getData (const OutputVariable &variable, const std::string &envPeriod) const |
Get data associated with this output variable and this object. More... | |
std::vector< LifeCycleCost > | lifeCycleCosts () const |
Returns the list of all LifeCycleCosts that refer to this object. More... | |
std::vector< IdfObject > | removeLifeCycleCosts () |
Removes all LifeCycleCosts that refer to this object. More... | |
IddObjectType | iddObjectType () const |
This is a virtual function that will tell you the type of iddObject you are dealing with. More... | |
AdditionalProperties | additionalProperties () const |
Returns this object's additional properties, constructing a new object if necessary. More... | |
bool | hasAdditionalProperties () const |
Returns true if this object has additional properties. More... | |
std::vector< IdfObject > | removeAdditionalProperties () |
Removes all additional properties that refer to this object. More... | |
bool | setParent (ParentObject &newParent) |
set the parent, child may have to call non-const methods on the parent More... | |
bool | operator< (const ModelObject &right) const |
bool | operator== (const ModelObject &other) const |
equality test More... | |
bool | operator!= (const ModelObject &other) const |
inequality test More... | |
std::vector< ScheduleTypeKey > | getScheduleTypeKeys (const Schedule &schedule) const |
Return the ScheduleTypeKeys indicating how schedule is used in this object. More... | |
boost::optional< double > | getAutosizedValue (std::string valueName, std::string unitString) const |
Gets the autosized component value from the sql file. More... | |
virtual std::vector < EMSActuatorNames > | emsActuatorNames () const |
Return the names of the available ems actuators. More... | |
virtual std::vector< std::string > | emsInternalVariableNames () const |
Return the names of the available ems internal variables. More... | |
boost::optional< ModelObject > | connectedObject (unsigned port) const |
boost::optional< unsigned > | connectedObjectPort (unsigned port) const |
Public Member Functions inherited from openstudio::WorkspaceObject | |
bool | canBeSource () const |
bool | canBeSource (unsigned index, const std::vector< std::string > &refLists=std::vector< std::string >()) const |
std::vector< std::string > | canBeTarget () const |
std::vector< unsigned > | getSourceIndices (const Handle &targetHandle) const |
std::vector< WorkspaceObject > | getSources (IddObjectType type) const |
boost::optional< WorkspaceObject > | getTarget (unsigned index) const |
IdfObject | idfObject () |
IdfObject | idfObject () const |
bool | initialized () const |
bool | isSource () const |
bool | isTarget () const |
unsigned | numSources () const |
bool | objectListFieldsEqual (const WorkspaceObject &other) const |
bool | objectListFieldsNonConflicting (const WorkspaceObject &other) const |
bool | operator< (const WorkspaceObject &right) const |
std::ostream & | operator<< (std::ostream &os, const WorkspaceObject &workspaceObject) |
std::vector < openstudio::IdfObject > | remove () |
bool | setPointer (unsigned index, const Handle &targetHandle) |
std::vector< WorkspaceObject > | sources () const |
std::vector< WorkspaceObject > | targets () const |
Workspace | workspace () const |
virtual | ~WorkspaceObject () |
Public Member Functions inherited from openstudio::IdfObject | |
std::string | briefDescription () const |
T | cast () const |
std::vector< T > | castVector (const std::vector< U > &objects) |
std::vector< std::vector < std::string > > | clearExtensibleGroups () |
IdfObject | clone (bool keepHandle=false) const |
std::string | comment () const |
boost::optional< std::string > | createName (bool overwrite=true) |
std::vector< unsigned > | dataFields () const |
bool | dataFieldsEqual (const IdfObject &other) const |
std::vector< std::string > | eraseExtensibleGroup (unsigned groupIndex) |
std::vector< IdfExtensibleGroup > | extensibleGroups () const |
boost::optional< std::string > | fieldComment (unsigned index, bool returnDefault=false) const |
boost::optional< double > | getDouble (unsigned index, bool returnDefault=false) const |
IdfExtensibleGroup | getExtensibleGroup (unsigned groupIndex) const |
std::vector< Handle > | getHandles (const std::vector< T > &objects) |
boost::optional< int > | getInt (unsigned index, bool returnDefault=false) const |
OSOptionalQuantity | getQuantity (unsigned index, bool returnDefault=false, bool returnIP=false) const |
boost::optional< std::string > | getString (unsigned index, bool returnDefault=false, bool returnUninitializedEmpty=false) const |
boost::optional< unsigned > | getUnsigned (unsigned index, bool returnDefault=false) const |
boost::optional< QUrl > | getURL (unsigned index, bool returnDefault=false) const |
Handle | handle () const |
IddObject | iddObject () const |
IdfObject (IddObjectType type, bool fastName=false) | |
IdfObject (const IddObject &, bool fastName=false) | |
IdfObject (const IdfObject &other) | |
IdfExtensibleGroup | insertExtensibleGroup (unsigned groupIndex) |
IdfExtensibleGroup | insertExtensibleGroup (unsigned groupIndex, const std::vector< std::string > &values) |
bool | isDataField (unsigned index) const |
bool | isEmpty (unsigned index) const |
bool | isObjectListField (unsigned index) const |
bool | isValid (StrictnessLevel level, bool checkNames=false) const |
boost::optional< unsigned > | maxExtensibleGroups () const |
boost::optional< unsigned > | maxFields () const |
unsigned | minExtensibleGroups () const |
unsigned | minFields () const |
boost::optional< std::string > | name (bool returnDefault=false) const |
std::string | nameString (bool returnDefault=false) const |
unsigned | numExtensibleGroups () const |
unsigned | numFields () const |
unsigned | numNonextensibleFields () const |
std::vector< unsigned > | objectListFields () const |
bool | objectListFieldsEqual (const IdfObject &other) const |
bool | objectListFieldsNonConflicting (const IdfObject &other) const |
bool | operator!= (const IdfObject &other) const |
std::ostream & | operator<< (std::ostream &os, const IdfObject &IdfObject) |
bool | operator== (const IdfObject &other) const |
boost::optional< T > | optionalCast () const |
std::vector< std::string > | popExtensibleGroup () |
std::ostream & | print (std::ostream &os) const |
std::ostream & | printField (std::ostream &os, unsigned index, bool isLastField=false) const |
std::ostream & | printName (std::ostream &os, bool hasFields=true) const |
IdfExtensibleGroup | pushExtensibleGroup () |
IdfExtensibleGroup | pushExtensibleGroup (const std::vector< std::string > &values) |
std::vector< unsigned > | requiredFields () const |
void | setComment (const std::string &msg) |
bool | setDouble (unsigned index, double value) |
bool | setFieldComment (unsigned index, const std::string &cmnt) |
bool | setInt (unsigned index, int value) |
boost::optional< std::string > | setName (const std::string &newName) |
bool | setQuantity (unsigned index, const Quantity &q) |
bool | setString (unsigned index, const std::string &value) |
bool | setUnsigned (unsigned index, unsigned value) |
std::vector< T > | subsetCastVector (const std::vector< U > &original) |
ValidityReport | validityReport (StrictnessLevel level, bool checkNames=false) const |
virtual | ~IdfObject () |
Static Public Member Functions | |
Static Methods | |
static IddObjectType | iddObjectType () |
Static Public Member Functions inherited from openstudio::IdfObject | |
static boost::optional< IdfObject > | load (const std::string &text) |
static boost::optional< IdfObject > | load (const std::string &text, const IddObject &iddObject) |
static int | printedFieldSpace () |
Protected Member Functions | |
Constructors and Destructors | |
AirflowNetworkSimulationControl (const Model &model) | |
Constructs a new SimulationControl object in the model. More... | |
Protected Member Functions inherited from openstudio::model::ParentObject | |
ParentObject (IddObjectType type, const Model &model) | |
Constructs a new ParentObject object in the model. More... | |
Protected Member Functions inherited from openstudio::model::ModelObject | |
ModelObject (IddObjectType type, const Model &model, bool fastName=false) | |
ModelObject (std::shared_ptr< detail::ModelObject_Impl > impl) | |
Protected Member Functions inherited from openstudio::WorkspaceObject | |
WorkspaceObject (std::shared_ptr< detail::WorkspaceObject_Impl > impl) | |
Protected Member Functions inherited from openstudio::IdfObject | |
IdfObject (std::shared_ptr< detail::IdfObject_Impl > impl) | |
Related Functions | |
(Note that these are not member functions.) | |
typedef boost::optional < AirflowNetworkSimulationControl > | OptionalAirflowNetworkSimulationControl |
Related Functions inherited from openstudio::model::ParentObject | |
std::vector< ModelObject > | getRecursiveChildren (const ParentObject &object, bool includeLifeCycleCostsAndAdditionalProperties=false) |
Returns object and all other objects accessible by calling children() on encountered ParentObjects . More... | |
std::vector< ModelObject > | getRecursiveChildrenAndResources (const ModelObject &object) |
Returns object and all other objects accessible by calling children() and resources() on encountered ModelObjects . More... | |
Related Functions inherited from openstudio::model::ModelObject | |
std::vector< ResourceObject > | getRecursiveResources (const ModelObject &object) |
Returns all ResourceObjects accessible by recursively calling .resources() starting from object. More... | |
typedef std::pair< std::string, std::string > | ScheduleTypeKey |
Typedef for ScheduleTypeRegistry key. More... | |
Additional Inherited Members | |
Public Types inherited from openstudio::WorkspaceObject | |
typedef boost::optional < WorkspaceObject > | OptionalWorkspaceObject |
typedef std::vector < WorkspaceObject > | WorkspaceObjectVector |
Public Types inherited from openstudio::IdfObject | |
typedef std::pair< IdfObject, IdfObject > | IdfObjectPair |
typedef std::vector< IdfObject > | IdfObjectVector |
typedef boost::optional < IdfObject > | OptionalIdfObject |
Protected Types inherited from openstudio::model::ModelObject | |
typedef detail::ModelObject_Impl | ImplType |
Protected Types inherited from openstudio::WorkspaceObject | |
typedef detail::WorkspaceObject_Impl | ImplType |
Protected Types inherited from openstudio::IdfObject | |
typedef detail::IdfObject_Impl | ImplType |
AirflowNetworkSimulationControl derives from ParentObject and is an interface to the OpenStudio IDD object named "AirflowNetwork:SimulationControl".
AirflowNetworkSimulationControl defines what types of multizone airflow calculations are part of an EnergyPlus simulation. AirflowNetworkSimulationControl parents several other ModelObject types that configure simulation parameters for EnergyPlus. AirflowNetworkSimulationControl does not have a public constructor because it is a unique ModelObject. To get the AirflowNetworkSimulationControl object for a Model or create one if it does not yet exist use model.getUniqueObject<AirflowNetworkSimulationControl>(). To get the AirflowNetworkSimulationControl object for a Model but not create one if it does not yet exist use model.getOptionalUniqueObject<AirflowNetworkSimulationControl>().
|
inlinevirtual |
|
explicitprotected |
Constructs a new SimulationControl object in the model.
boost::optional<double> openstudio::model::AirflowNetworkSimulationControl::absoluteAirflowConvergenceTolerance | ( | ) | const |
This tolerance is defined as the absolute value of the sum of the mass flow rates.
The mass flow rates described here refer to the mass flow rates at all nodes in the AirflowNetwork model. The solution converges when both this tolerance and the tolerance in the previous field (Relative Airflow Convergence Tolerance) are satisfied.
boost::optional<std::string> openstudio::model::AirflowNetworkSimulationControl::airflowNetworkControl | ( | ) | const |
Determines the type of AirflowNetwork simulation that will be run.
NoMultizoneOrDistribution: Only perform Simple calculations (objects ZoneInfiltration:*, ZoneVentilation:*, ZoneMixing, ZoneCrossMixing, ZoneRefrigerationDoorMixing, ZoneAirBalance:OutdoorAir, ZoneEarthtube, ZoneThermalChimney, and ZoneCoolTower:Shower);
MultizoneWithoutDistribution: Use AirflowNetwork objects to simulate multizone Airflows driven by wind during simulation time, and objects of ZoneInfiltration:*, ZoneVentilation:*, ZoneMixing, ZoneCrossMixing, ZoneRefrigerationDoorMixing, ZoneAirBalance:OutdoorAir, ZoneEarthtube, ZoneThermalChimney, and ZoneCoolTower:Shower are ignored;
MultizoneWithDistributionOnlyDuringFanOperation: Perform distribution system calculations during system fan on time and Simple calculations during system Fan off time;
MultizoneWithDistribution: Perform distribution system calculations during system fan on time and multizone Airflow driven by wind during system fan off time.
boost::optional<double> openstudio::model::AirflowNetworkSimulationControl::azimuthAngleofLongAxisofBuilding | ( | ) | const |
Azimuth angle of long axis of building in degrees clockwise from true North.
Used only if Wind Pressure Coefficient Type = SurfaceAverageCalculation.
boost::optional<double> openstudio::model::AirflowNetworkSimulationControl::buildingAspectRatio | ( | ) | const |
Ratio of building width along short axis to width along long axis.
Used only if Wind Pressure Coefficient Type = SurfaceAverageCalculation.
boost::optional<std::string> openstudio::model::AirflowNetworkSimulationControl::buildingType | ( | ) | const |
General building type, used only if Wind Pressure Coefficient Type = SurfaceAverageCalculation.
boost::optional<double> openstudio::model::AirflowNetworkSimulationControl::convergenceAccelerationLimit | ( | ) | const |
Used only for AirflowNetwork:SimulationControl.
bool openstudio::model::AirflowNetworkSimulationControl::heightDependenceofExternalNodeTemperature | ( | ) | const |
Returns true if the temperature of external nodes will be computed based on height.
boost::optional<std::string> openstudio::model::AirflowNetworkSimulationControl::heightSelectionforLocalWindPressureCalculation | ( | ) | const |
|
static |
boost::optional<std::string> openstudio::model::AirflowNetworkSimulationControl::initializationType | ( | ) | const |
Determines how the network equations are initialized.
bool openstudio::model::AirflowNetworkSimulationControl::isAbsoluteAirflowConvergenceToleranceDefaulted | ( | ) | const |
Returns true if the absolute convergence tolerance is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isAirflowNetworkControlDefaulted | ( | ) | const |
Returns true if the type of AirflowNetwork simulation is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isAzimuthAngleofLongAxisofBuildingDefaulted | ( | ) | const |
Returns true if the azimuth angle of long axis is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isBuildingAspectRatioDefaulted | ( | ) | const |
Returns true if the ratio of the building width to length is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isBuildingTypeDefaulted | ( | ) | const |
Returns true if the building type is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isConvergenceAccelerationLimitDefaulted | ( | ) | const |
Returns true if the convergence acceleration limit is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isHeightDependenceofExternalNodeTemperatureDefaulted | ( | ) | const |
Returns true if the external nodes temperature computation type is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isHeightSelectionforLocalWindPressureCalculationDefaulted | ( | ) | const |
Returns true if the height selection procedure is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isInitializationTypeDefaulted | ( | ) | const |
Returns true if the initialization type is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isMaximumNumberofIterationsDefaulted | ( | ) | const |
Returns true if the maximum number of iterations is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isRelativeAirflowConvergenceToleranceDefaulted | ( | ) | const |
Returns true if the relative convergence tolerance is defaulted.
bool openstudio::model::AirflowNetworkSimulationControl::isWindPressureCoefficientTypeDefaulted | ( | ) | const |
Returns true if the wind pressure treatment is defaulted.
boost::optional<int> openstudio::model::AirflowNetworkSimulationControl::maximumNumberofIterations | ( | ) | const |
Determines the maximum number of iterations used to converge on a solution.
If this limit is exceeded, the program terminates.
boost::optional<double> openstudio::model::AirflowNetworkSimulationControl::relativeAirflowConvergenceTolerance | ( | ) | const |
This tolerance is defined as the absolute value of the sum of the mass flow rates divided by the sum of the absolute value of the mass Flow Rates.
The mass flow rates described here refer to the mass Flow Rates at all Nodes in the AirflowNetwork model. The solution converges when both this tolerance and the tolerance in the Absolute Airflow Convergence Tolerance field are satisfied.
void openstudio::model::AirflowNetworkSimulationControl::resetAbsoluteAirflowConvergenceTolerance | ( | ) |
Resets the absolute airflow convergence tolerance.
void openstudio::model::AirflowNetworkSimulationControl::resetAirflowNetworkControl | ( | ) |
Resets the airflow network control type.
void openstudio::model::AirflowNetworkSimulationControl::resetAzimuthAngleofLongAxisofBuilding | ( | ) |
Resets the azimuthal angle of the building.
void openstudio::model::AirflowNetworkSimulationControl::resetBuildingAspectRatio | ( | ) |
Resets the building aspect ratio.
void openstudio::model::AirflowNetworkSimulationControl::resetBuildingType | ( | ) |
Resets the building type.
void openstudio::model::AirflowNetworkSimulationControl::resetConvergenceAccelerationLimit | ( | ) |
Resets the convergence acceleration limit.
void openstudio::model::AirflowNetworkSimulationControl::resetHeightDependenceofExternalNodeTemperature | ( | ) |
Resets the external nodes temperature computation type.
void openstudio::model::AirflowNetworkSimulationControl::resetHeightSelectionforLocalWindPressureCalculation | ( | ) |
Resets the height selection procedure.
void openstudio::model::AirflowNetworkSimulationControl::resetInitializationType | ( | ) |
Resets the initialization type.
void openstudio::model::AirflowNetworkSimulationControl::resetMaximumNumberofIterations | ( | ) |
Resets the maximum number of iteration.
void openstudio::model::AirflowNetworkSimulationControl::resetRelativeAirflowConvergenceTolerance | ( | ) |
Resets the relative airflow convergence tolerance.
void openstudio::model::AirflowNetworkSimulationControl::resetWindPressureCoefficientType | ( | ) |
Resets the wind pressure coefficient type.
bool openstudio::model::AirflowNetworkSimulationControl::setAbsoluteAirflowConvergenceTolerance | ( | double | tolerance | ) |
Sets the absolute airflow convergence tolerance.
bool openstudio::model::AirflowNetworkSimulationControl::setAirflowNetworkControl | ( | std::string | airflowNetworkControl | ) |
Sets the airflow network control type.
bool openstudio::model::AirflowNetworkSimulationControl::setAzimuthAngleofLongAxisofBuilding | ( | double | angle | ) |
Sets the azimuthal angle of the building.
bool openstudio::model::AirflowNetworkSimulationControl::setBuildingAspectRatio | ( | double | ratio | ) |
Sets the building aspect ratio.
bool openstudio::model::AirflowNetworkSimulationControl::setBuildingType | ( | std::string | type | ) |
Sets the building type.
bool openstudio::model::AirflowNetworkSimulationControl::setConvergenceAccelerationLimit | ( | double | limit | ) |
Sets the convergence acceleration limit.
bool openstudio::model::AirflowNetworkSimulationControl::setHeightDependenceofExternalNodeTemperature | ( | bool | tf | ) |
Sets the external nodes temperature computation type.
bool openstudio::model::AirflowNetworkSimulationControl::setHeightSelectionforLocalWindPressureCalculation | ( | std::string | height | ) |
Sets the height selection procedure.
bool openstudio::model::AirflowNetworkSimulationControl::setInitializationType | ( | std::string | type | ) |
Sets the initialization type.
bool openstudio::model::AirflowNetworkSimulationControl::setMaximumNumberofIterations | ( | int | number | ) |
Sets the maximum number of iteration.
bool openstudio::model::AirflowNetworkSimulationControl::setRelativeAirflowConvergenceTolerance | ( | double | tolerance | ) |
Sets the relative airflow convergence tolerance.
bool openstudio::model::AirflowNetworkSimulationControl::setWindPressureCoefficientType | ( | std::string | type | ) |
Sets the wind pressure coefficient type.
boost::optional<std::string> openstudio::model::AirflowNetworkSimulationControl::windPressureCoefficientType | ( | ) | const |
|
related |