#include <Model.hpp>

Inheritance diagram for openstudio::model::Model:

Public Member Functions
void	applySizingValues ()
	For each object in the model with autosizable fields, retrieves the autosized values from the sizing run and then sets these values in the object explicitly. More...

void	autosize ()
	For each object in the model with autosizable fields, sets all autosizable fields to 'autosize'. More...

void	connect (ModelObject sourceObject, unsigned sourcePort, ModelObject targetObject, unsigned targetPort) const
	Connects the sourcePort on the source ModelObject to the targetPort on the target ModelObject. More...

void	disconnect (ModelObject object, unsigned port)
	Disconnects the port on the given ModelObject. More...

boost::optional< ComponentData >	insertComponent (const Component &component)
	Inserts Component into Model and returns the primary object, if possible. More...

std::vector< ModelObject >	modelObjects (bool sorted=false) const
	Get all model objects. More...

bool	operator== (const Model &other) const
	Equality test, tests if this Model shares the same implementation object with other. More...

std::vector < openstudio::IdfObject >	purgeUnusedResourceObjects ()
	Removes all ResourceObjects with nonResourceObjectUseCount() == 0. More...

std::vector < openstudio::IdfObject >	purgeUnusedResourceObjects (IddObjectType iddObjectType)
	Removes all ResourceObjects of given IddObjectType with directUseCount() == 0. More...

Constructors and Destructors
	Model ()
	Creates a new, empty Model. More...

	Model (const openstudio::IdfFile &idfFile)
	Creates a new Model with one ModelObject for each IdfObject in the given IdfFile. More...

	Model (const openstudio::Workspace &workspace)
	Creates a new Model with one ModelObject for each WorkspaceObjects in the given Workspace. More...

virtual	~Model ()

Getters
WorkflowJSON	workflowJSON () const
	Get the WorkflowJSON. More...

boost::optional< SqlFile >	sqlFile () const
	Returns the EnergyPlus output SqlFile if set. More...

boost::optional< Building >	building () const
	Get the Building object if there is one, this implementation uses a cached reference to the Building object which can be significantly faster than calling getOptionalUniqueModelObject<Building>(). More...

boost::optional < FoundationKivaSettings >	foundationKivaSettings () const
	Get the FoundationKivaSettings object if there is one, this implementation uses a cached reference to the FoundationKivaSettings object which can be significantly faster than calling getOptionalUniqueModelObject<FoundationKivaSettings>(). More...

boost::optional < LifeCycleCostParameters >	lifeCycleCostParameters () const
	Get the LifeCycleCostParameters object if there is one, this implementation uses a cached reference to the LifeCycleCostParameters object which can be significantly faster than calling getOptionalUniqueModelObject<LifeCycleCostParameters>(). More...

boost::optional< RunPeriod >	runPeriod () const
	Get the RunPeriod object if there is one, this implementation uses a cached reference to the RunPeriod object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriod>(). More...

boost::optional< YearDescription >	yearDescription () const
	Get the YearDescription object if there is one, this implementation uses a cached reference to the YearDescription object which can be significantly faster than calling getOptionalUniqueModelObject<YearDescription>(). More...

boost::optional< int >	calendarYear () const
	Get or create the YearDescription object if there is one, then call method from YearDescription. More...

std::string	dayofWeekforStartDay () const

bool	isDayofWeekforStartDayDefaulted () const

bool	isLeapYear () const

bool	isIsLeapYearDefaulted () const

bool	setCalendarYear (int calendarYear)

void	resetCalendarYear ()

bool	setDayofWeekforStartDay (std::string dayofWeekforStartDay)

void	resetDayofWeekforStartDay ()

bool	setIsLeapYear (bool isLeapYear)

void	resetIsLeapYear ()

int	assumedYear ()

openstudio::Date	makeDate (openstudio::MonthOfYear monthOfYear, unsigned dayOfMonth)

openstudio::Date	makeDate (unsigned monthOfYear, unsigned dayOfMonth)

openstudio::Date	makeDate (openstudio::NthDayOfWeekInMonth n, openstudio::DayOfWeek dayOfWeek, openstudio::MonthOfYear monthOfYear)

openstudio::Date	makeDate (unsigned dayOfYear)

boost::optional< WeatherFile >	weatherFile () const
	Get the WeatherFile object if there is one, this implementation uses a cached reference to the WeatherFile object which can be significantly faster than calling getOptionalUniqueModelObject<WeatherFile>(). More...

Schedule	alwaysOnDiscreteSchedule () const
	Get an always on schedule with discrete type limits if there is one. More...

std::string	alwaysOnDiscreteScheduleName () const
	Get the always on schedule with discrete type limits name. More...

Schedule	alwaysOffDiscreteSchedule () const
	Get an always off schedule with discrete type limits if there is one. More...

std::string	alwaysOffDiscreteScheduleName () const
	Get the always off schedule with discrete type limits name. More...

Schedule	alwaysOnContinuousSchedule () const
	Get an always on schedule with continuous type limits if there is one. More...

std::string	alwaysOnContinuousScheduleName () const
	Get the always on schedule with continuous type limits name. More...

Node	outdoorAirNode () const
	Get a Node named 'Model Outdoor Air Node' (intended to be forward translated to an OutdoorAir:Node) and not connected to a PlantLoop or AirLoopHVAC. More...

SpaceType	plenumSpaceType () const
	Get the space type used for plenums if there is one. More...

std::string	plenumSpaceTypeName () const
	Get the space type name used for plenums. More...

Setters
bool	setWorkflowJSON (const WorkflowJSON &workflowJSON)
	Set the WorkflowJSON. More...

void	resetWorkflowJSON ()
	Reset the WorkflowJSON. More...

bool	setSqlFile (const SqlFile &sqlFile)
	Sets the EnergyPlus output SqlFile. More...

bool	resetSqlFile ()
	Resets the EnergyPlus output SqlFile. More...

Template Methods
template<typename T >
boost::optional< T >	getModelObject (const Handle &handle) const
	Returns the ModelObject referenced by handle if it is of type T. More...

template<typename T >
T	getUniqueModelObject ()
	Returns the unique ModelObject of type T, creates a one if none are found. More...

template<typename T >
boost::optional< T >	getOptionalUniqueModelObject () const
	Returns the unique ModelObject of type T if it is found. More...

template<typename T >
std::vector< T >	getModelObjects (bool sorted=false) const
	Returns all ModelObjects of type T. More...

template<typename T >
std::vector< T >	getConcreteModelObjects () const
	Returns all ModelObjects of type T, using T::iddObjectType() to speed up the search. More...

template<typename T >
std::vector< T >	getModelObjects (const std::vector< openstudio::Handle > &handles) const
	Returns the subset of ModelObjects referenced by handles which are of type T. More...

template<typename T >
boost::optional< T >	getModelObjectByName (const std::string &name) const
	Returns the ModelObjects of type T with name (exactMatch). More...

template<typename T >
std::vector< T >	getModelObjectsByName (const std::string &name, bool exactMatch=true) const
	Returns all ModelObjects of type T with given name. More...

template<typename T >
boost::optional< T >	getConcreteModelObjectByName (const std::string &name) const

template<typename T >
std::vector< T >	getConcreteModelObjectsByName (const std::string &name) const

Public Member Functions inherited from openstudio::Workspace
std::vector< WorkspaceObject >	addAndInsertObjects (const std::vector< IdfObject > &objectsToAdd, const std::vector< IdfObject > &objectsToInsert)

std::vector< WorkspaceObject >	addAndInsertObjects (const std::vector< WorkspaceObject > &objectsToAdd, const std::vector< WorkspaceObject > &objectsToInsert)

std::vector< WorkspaceObject >	addAndInsertObjects (const std::vector< WorkspaceObject > &objectsToAdd, const std::vector< std::vector< WorkspaceObject > > &objectsToInsert)

boost::optional< WorkspaceObject >	addObject (const IdfObject &idfObject)

std::vector< WorkspaceObject >	addObjects (const std::vector< IdfObject > &idfObjects, bool checkNames=true)

std::vector< WorkspaceObject >	addObjects (const std::vector< WorkspaceObject > &objects, bool checkNames=true)

bool	canBeTarget (const Handle &handle, const std::set< std::string > &referenceListNames) const

T	cast () const

Workspace	clone (bool keepHandles=false) const

Workspace	cloneSubset (const std::vector< Handle > &handles, bool keepHandles=false, StrictnessLevel level=StrictnessLevel::Draft) const

bool	connectProgressBar (openstudio::ProgressBar &progressBar)

bool	disconnectProgressBar (openstudio::ProgressBar &progressBar)

bool	fastNaming () const

boost::optional< IddObject >	getIddObject (const IddObjectType &type) const

boost::optional< WorkspaceObject >	getObject (Handle handle) const

boost::optional< WorkspaceObject >	getObjectByNameAndReference (std::string name, const std::vector< std::string > &referenceNames) const

boost::optional< WorkspaceObject >	getObjectByTypeAndName (IddObjectType objectType, const std::string &name) const

std::vector< WorkspaceObject >	getObjects (const std::vector< Handle > &handles) const

std::vector< WorkspaceObject >	getObjectsByName (const std::string &name, bool exactMatch=true) const

std::vector< WorkspaceObject >	getObjectsByReference (const std::string &referenceName) const

std::vector< WorkspaceObject >	getObjectsByReference (const std::vector< std::string > &referenceNames) const

std::vector< WorkspaceObject >	getObjectsByType (IddObjectType objectType) const

std::vector< WorkspaceObject >	getObjectsByType (const IddObject &objectType) const

std::vector< WorkspaceObject >	getObjectsByTypeAndName (IddObjectType objectType, const std::string &name) const

std::vector< Handle >	handles (bool sorted=false) const

IddFile	iddFile () const

IddFileType	iddFileType () const

boost::optional< WorkspaceObject >	insertObject (const IdfObject &idfObject)

std::vector< WorkspaceObject >	insertObjects (const std::vector< IdfObject > &idfObjects)

std::vector< WorkspaceObject >	insertObjects (const std::vector< WorkspaceObject > &objects)

bool	isInIddFile (IddObjectType type) const

bool	isMember (const Handle &handle) const

bool	isValid () const

bool	isValid (StrictnessLevel level) const

std::vector< std::pair< QUrl, openstudio::path > >	locateUrls (const std::vector< URLSearchPath > &t_paths, bool t_create_relative_paths, const openstudio::path &t_infile)

boost::optional< std::string >	name (const Handle &handle) const

std::string	nextName (const std::string &name, bool fillIn) const

std::string	nextName (const IddObjectType &iddObjectType, bool fillIn) const

unsigned	numObjects () const

unsigned	numObjectsOfType (IddObjectType type) const

unsigned	numObjectsOfType (const IddObject &objectType) const

std::vector< WorkspaceObject >	objects (bool sorted=false) const

std::vector< WorkspaceObject >	objectsWithURLFields () const

bool	operator!= (const Workspace &other) const

std::ostream &	operator<< (std::ostream &os, const Workspace &workspace)

bool	operator== (const Workspace &other) const

boost::optional< T >	optionalCast () const

WorkspaceObjectOrder	order ()

const WorkspaceObjectOrder	order () const

bool	removeObject (const Handle &handle)

bool	removeObjects (const std::vector< Handle > &handles)

bool	save (const openstudio::path &p, bool overwrite=false)

void	setFastNaming (bool fastNaming)

bool	setStrictnessLevel (StrictnessLevel level)

std::vector< Handle >	sort (const std::vector< Handle > &handles) const

std::vector< WorkspaceObject >	sort (const std::vector< WorkspaceObject > &objects) const

StrictnessLevel	strictnessLevel () const

bool	swap (WorkspaceObject &currentObject, IdfObject &newObject, bool keepTargets=false)

void	swap (Workspace &other)

IdfFile	toIdfFile () const

ValidityReport	validityReport () const

ValidityReport	validityReport (StrictnessLevel level) const

VersionString	version () const

boost::optional< WorkspaceObject >	versionObject () const

	Workspace (const Workspace &other)

	Workspace (StrictnessLevel level)

	Workspace ()

	Workspace (const IdfFile &idfFile, StrictnessLevel level=StrictnessLevel::None)

	Workspace (StrictnessLevel level, IddFileType iddFileType)

virtual	~Workspace ()

Static Public Member Functions
static boost::optional< Model >	load (const path &osmPath)
	Load Model from file, attempts to load WorkflowJSON from standard path. More...

static boost::optional< Model >	load (const path &osmPath, const path &workflowJSONPath)
	Load Model and WorkflowJSON from files, fails if either osm or workflowJSON cannot be loaded. More...

Static Public Member Functions inherited from openstudio::Workspace
static boost::optional< Workspace >	load (const openstudio::path &p)

static boost::optional< Workspace >	load (const openstudio::path &p, const IddFile &iddFile)

static boost::optional< Workspace >	load (const openstudio::path &p, const IddFileType &iddFileType)

Related Functions
(Note that these are not member functions.)
bool	compareInputAndOutput (const ModelObject &object, const std::string &attributeName, double inputResult, double outputResult, double tol, LogLevel logLevel=LogLevel::Debug)
	Compare inputResult to outputResult. More...

typedef std::vector< Model >	ModelVector

typedef boost::optional< Model >	OptionalModel

Additional Inherited Members
Public Types inherited from openstudio::Workspace
typedef boost::optional < Workspace >	OptionalWorkspace

typedef std::vector< Workspace >	WorkspaceVector

Protected Types inherited from openstudio::Workspace
typedef detail::Workspace_Impl	ImplType

Protected Member Functions inherited from openstudio::Workspace
virtual void	addVersionObject ()

std::vector< WorkspaceObject >	allObjects () const

	Workspace (std::shared_ptr< detail::Workspace_Impl > impl)

Detailed Description

Model derives from Workspace and is a container for ModelObjects as defined by the OpenStudio IDD.

The OpenStudio Model is primarily a container for ModelObjects which together define a complete or partial model of a building for energy simulation. A ModelObject cannot exist outside of a Model which ensures that each ModelObject can access the full Model to search for related ModelObjects. Model also accepts a connection to EnergyPlus simulation output through the SqlFile access to the SQLite output of EnergyPlus. Each ModelObject may then access simulation output in its own context. Connection to simulation data from other simulation engines is planned for the future.

The OpenStudio Model input data model is based on the schema defined by the OpenStudio IDD. Each concrete ModelObject wraps a particular data type in the OpenStudio IDD and Model enforces collection level constraints such as preventing multiple definitions of unique objects, updating reference fields that point from one ModelObject to another when the target's name changes, etc. Most of Model's capabilities for managing data according to an IDD schema are implemented in the Workspace base class. See the Workspace documentation in the utilities sub-project for more information about Workspace.

Constructor & Destructor Documentation

openstudio::model::Model::Model ( )

Creates a new, empty Model.

openstudio::model::Model::Model ( const openstudio::IdfFile & idfFile )

explicit

Creates a new Model with one ModelObject for each IdfObject in the given IdfFile.

Any unwrapped IDD types will be wrapped with GenericModelObject.

openstudio::model::Model::Model ( const openstudio::Workspace & workspace )

explicit

Creates a new Model with one ModelObject for each WorkspaceObjects in the given Workspace.

Any unwrapped IDD types will be wrapped with GenericModelObject.

virtual openstudio::model::Model::~Model ( )

inlinevirtual

Member Function Documentation

Schedule openstudio::model::Model::alwaysOffDiscreteSchedule ( ) const

Get an always off schedule with discrete type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOffDiscreteScheduleName ( ) const

Get the always off schedule with discrete type limits name.

Schedule openstudio::model::Model::alwaysOnContinuousSchedule ( ) const

Get an always on schedule with continuous type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOnContinuousScheduleName ( ) const

Get the always on schedule with continuous type limits name.

Schedule openstudio::model::Model::alwaysOnDiscreteSchedule ( ) const

Get an always on schedule with discrete type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOnDiscreteScheduleName ( ) const

Get the always on schedule with discrete type limits name.

void openstudio::model::Model::applySizingValues ( )

For each object in the model with autosizable fields, retrieves the autosized values from the sizing run and then sets these values in the object explicitly.

Requires a sql file with sizing run results from a previous simulation. For example, if a ChillerElectricEIR's Reference Capacity was previously autosized to 120,000W by the sizing run, this method would find the 120,000W in the sql file and then set the Reference Capacity field to 120,000W explicitly. Next time a simulation is run, the chiller's capacity will be 120,000W, it will not be autosized during the sizing run.

int openstudio::model::Model::assumedYear ( )

void openstudio::model::Model::autosize ( )

For each object in the model with autosizable fields, sets all autosizable fields to 'autosize'.

Fields that previously contained hard-sized values will be overwritten by 'autosize.'

boost::optional<Building> openstudio::model::Model::building ( ) const

Get the Building object if there is one, this implementation uses a cached reference to the Building object which can be significantly faster than calling getOptionalUniqueModelObject<Building>().

boost::optional<int> openstudio::model::Model::calendarYear ( ) const

Get or create the YearDescription object if there is one, then call method from YearDescription.

void openstudio::model::Model::connect	(	ModelObject	sourceObject,
		unsigned	sourcePort,
		ModelObject	targetObject,
		unsigned	targetPort
	)		const

Connects the sourcePort on the source ModelObject to the targetPort on the target ModelObject.

std::string openstudio::model::Model::dayofWeekforStartDay ( ) const

void openstudio::model::Model::disconnect	(	ModelObject	object,
		unsigned	port
	)

Disconnects the port on the given ModelObject.

boost::optional<FoundationKivaSettings> openstudio::model::Model::foundationKivaSettings ( ) const

Get the FoundationKivaSettings object if there is one, this implementation uses a cached reference to the FoundationKivaSettings object which can be significantly faster than calling getOptionalUniqueModelObject<FoundationKivaSettings>().

template<typename T >

boost::optional<T> openstudio::model::Model::getConcreteModelObjectByName ( const std::string & name ) const

inline

template<typename T >

std::vector<T> openstudio::model::Model::getConcreteModelObjects ( ) const

inline

Returns all ModelObjects of type T, using T::iddObjectType() to speed up the search.

This method will only work for concrete model objects (leaves in the ModelObject inheritance tree), hence the name.

template<typename T >

std::vector<T> openstudio::model::Model::getConcreteModelObjectsByName ( const std::string & name ) const

inline

template<typename T >

boost::optional<T> openstudio::model::Model::getModelObject ( const Handle & handle ) const

inline

Returns the ModelObject referenced by handle if it is of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObject<Zone>(handle) the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

boost::optional<T> openstudio::model::Model::getModelObjectByName ( const std::string & name ) const

inline

Returns the ModelObjects of type T with name (exactMatch).

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject), but please see getConcreteModelObjectByName if T is concrete.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjectsByName<Zone>("Zone1") the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjects ( bool sorted = false ) const

inline

Returns all ModelObjects of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjects<Zone>(), the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjects ( const std::vector< openstudio::Handle > & handles ) const

inline

Returns the subset of ModelObjects referenced by handles which are of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjects<Zone>(handles) the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjectsByName	(	const std::string &	name,
		bool	exactMatch = `true`
	)		const

inline

Returns all ModelObjects of type T with given name.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjectsByName<Zone>("Zone1") the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

boost::optional<T> openstudio::model::Model::getOptionalUniqueModelObject ( ) const

inline

Returns the unique ModelObject of type T if it is found.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getOptionalUniqueModelObject<Facility>() the user must include both Facility.hpp and Facility_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

T openstudio::model::Model::getUniqueModelObject ( )

inline

Returns the unique ModelObject of type T, creates a one if none are found.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getUniqueModelObject<Facility>() the user must include both Facility.hpp and Facility_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

boost::optional<ComponentData> openstudio::model::Model::insertComponent ( const Component & component )

Inserts Component into Model and returns the primary object, if possible.

bool openstudio::model::Model::isDayofWeekforStartDayDefaulted ( ) const

bool openstudio::model::Model::isIsLeapYearDefaulted ( ) const

bool openstudio::model::Model::isLeapYear ( ) const

boost::optional<LifeCycleCostParameters> openstudio::model::Model::lifeCycleCostParameters ( ) const

Get the LifeCycleCostParameters object if there is one, this implementation uses a cached reference to the LifeCycleCostParameters object which can be significantly faster than calling getOptionalUniqueModelObject<LifeCycleCostParameters>().

static boost::optional<Model> openstudio::model::Model::load ( const path & osmPath )

static

Load Model from file, attempts to load WorkflowJSON from standard path.

static boost::optional<Model> openstudio::model::Model::load	(	const path &	osmPath,
		const path &	workflowJSONPath
	)

static

Load Model and WorkflowJSON from files, fails if either osm or workflowJSON cannot be loaded.

openstudio::Date openstudio::model::Model::makeDate	(	openstudio::MonthOfYear	monthOfYear,
		unsigned	dayOfMonth
	)

openstudio::Date openstudio::model::Model::makeDate	(	unsigned	monthOfYear,
		unsigned	dayOfMonth
	)

openstudio::Date openstudio::model::Model::makeDate	(	openstudio::NthDayOfWeekInMonth	n,
		openstudio::DayOfWeek	dayOfWeek,
		openstudio::MonthOfYear	monthOfYear
	)

openstudio::Date openstudio::model::Model::makeDate ( unsigned dayOfYear )

std::vector<ModelObject> openstudio::model::Model::modelObjects ( bool sorted = false ) const

Get all model objects.

If sorted, then the objects are returned in the preferred order.

bool openstudio::model::Model::operator== ( const Model & other ) const

Equality test, tests if this Model shares the same implementation object with other.

Node openstudio::model::Model::outdoorAirNode ( ) const

Get a Node named 'Model Outdoor Air Node' (intended to be forward translated to an OutdoorAir:Node) and not connected to a PlantLoop or AirLoopHVAC.

create a new Node if necessary and add it to the model

SpaceType openstudio::model::Model::plenumSpaceType ( ) const

Get the space type used for plenums if there is one.

Create a new space type if necessary and add it to the model

std::string openstudio::model::Model::plenumSpaceTypeName ( ) const

Get the space type name used for plenums.

std::vector<openstudio::IdfObject> openstudio::model::Model::purgeUnusedResourceObjects ( )

Removes all ResourceObjects with nonResourceObjectUseCount() == 0.

All objects removed in the course of the purge are returned to support undos. Note that ResourceObjects may have children that are not ResourceObjects, and these may be removed as well.

std::vector<openstudio::IdfObject> openstudio::model::Model::purgeUnusedResourceObjects ( IddObjectType iddObjectType )

Removes all ResourceObjects of given IddObjectType with directUseCount() == 0.

All objects removed in the course of the purge are returned to support undos. Note that ResourceObjects may have children that are not ResourceObjects, and these may be removed as well.

void openstudio::model::Model::resetCalendarYear ( )

void openstudio::model::Model::resetDayofWeekforStartDay ( )

void openstudio::model::Model::resetIsLeapYear ( )

bool openstudio::model::Model::resetSqlFile ( )

Resets the EnergyPlus output SqlFile.

void openstudio::model::Model::resetWorkflowJSON ( )

Reset the WorkflowJSON.

boost::optional<RunPeriod> openstudio::model::Model::runPeriod ( ) const

Get the RunPeriod object if there is one, this implementation uses a cached reference to the RunPeriod object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriod>().

bool openstudio::model::Model::setCalendarYear ( int calendarYear )

bool openstudio::model::Model::setDayofWeekforStartDay ( std::string dayofWeekforStartDay )

bool openstudio::model::Model::setIsLeapYear ( bool isLeapYear )

bool openstudio::model::Model::setSqlFile ( const SqlFile & sqlFile )

Sets the EnergyPlus output SqlFile.

SqlFile must correspond to EnergyPlus simulation of this Model.

bool openstudio::model::Model::setWorkflowJSON ( const WorkflowJSON & workflowJSON )

Set the WorkflowJSON.

boost::optional<SqlFile> openstudio::model::Model::sqlFile ( ) const

Returns the EnergyPlus output SqlFile if set.

boost::optional<WeatherFile> openstudio::model::Model::weatherFile ( ) const

Get the WeatherFile object if there is one, this implementation uses a cached reference to the WeatherFile object which can be significantly faster than calling getOptionalUniqueModelObject<WeatherFile>().

WorkflowJSON openstudio::model::Model::workflowJSON ( ) const

Get the WorkflowJSON.

boost::optional<YearDescription> openstudio::model::Model::yearDescription ( ) const

Get the YearDescription object if there is one, this implementation uses a cached reference to the YearDescription object which can be significantly faster than calling getOptionalUniqueModelObject<YearDescription>().

Friends And Related Function Documentation

bool compareInputAndOutput	(	const ModelObject &	object,
		const std::string &	attributeName,
		double	inputResult,
		double	outputResult,
		double	tol,
		LogLevel	logLevel = `LogLevel::Debug`
	)

The intention is for inputResult to be the value of attributeName calculated using input data, and for outputResult to be the value of attributeName extracted from the Model::sqlFile(). Returns false and logs a message on the Model log channel at logLevel if the (relative) error is greater than tol.

typedef std::vector<Model> ModelVector

Public Member Functions

Static Public Member Functions

Related Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation