 |
OpenStudio:model |
#include <PlanarSurface.hpp>
Inheritance diagram for openstudio::model::PlanarSurface:Public Member Functions | |
| double | azimuth () const |
| Returns the surface's azimuth measured clockwise as angle between outward normal and local North (radians). More... | |
| Point3d | centroid () const |
| Return the centroid of this planar surface's vertices. More... | |
| bool | equalVertices (const PlanarSurface &other) const |
| Check if this planar surface's vertices are equal to the other's in the building coordinate system. More... | |
| boost::optional< double > | exteriorVisibleAbsorbtance () const |
| boost::optional< double > | exteriorVisibleAbsorptance () const |
| Returns exterior visible absorptance (unitless), if available. More... | |
| std::vector < GeneratorPhotovoltaic > | generatorPhotovoltaics () const |
| Returns any generator photovoltaics associated with this surface. More... | |
| double | grossArea () const |
| Computes the surface's gross area (m^2). More... | |
| boost::optional< double > | heatCapacity () const |
| Returns the heat capacity of this surface in J/m^2*K, if available. More... | |
| boost::optional< double > | interiorVisibleAbsorbtance () const |
| boost::optional< double > | interiorVisibleAbsorptance () const |
| Returns interior visible absorptance (unitless), if available. More... | |
| bool | isAirWall () const |
| Checks if this surface is an air wall, returns true if the Construction includes a single layer of type MaterialAirWall. More... | |
| double | netArea () const |
| Computes the surface's net area (m^2). More... | |
| Vector3d | outwardNormal () const |
| Returns the outward normal vector in local coordinates. More... | |
| Plane | plane () const |
| Get the plane, throws openstudio::Exception if cannot compute plane for this surface. More... | |
| bool | reverseEqualVertices (const PlanarSurface &other) const |
| Check if this planar surface's vertices are reverse equal to the other's in the building coordinate system. More... | |
| bool | setThermalConductance (double value) |
| Sets the conductance of this surface in W/m^2*K, if possible. More... | |
| bool | setUFactor (double value) |
| Sets the u-factor of this surface in W/m^2*K, if possible. More... | |
| std::vector< ModelObject > | solarCollectors () const |
| Returns any solar hot water collectors associated with this surface. More... | |
| bool | subtractFromGrossArea () const |
| Reports if user should subtract this surface's net area from parent's gross area to compute parent's net area (e.g. More... | |
| std::vector < SurfacePropertyConvectionCoefficients > | surfacePropertyConvectionCoefficients () const |
| Returns any SurfacePropertyConvectionCoefficients associated with this surface, does not return SurfacePropertyConvectionCoefficientsMultipleSurface. More... | |
| boost::optional< double > | thermalConductance () const |
| Returns the thermal conductance of this surface in W/m^2*K. More... | |
| double | tilt () const |
| Returns the surface's tilt measured as angle between outward normal and local up (radians). More... | |
| virtual std::vector < std::vector< Point3d > > | triangulation () const |
| Get a triangulation of this surface, subsurfaces will be replaced by holes in the triangulation. More... | |
| boost::optional< double > | uFactor () const |
| Returns the u-factor of this surface. More... | |
| boost::optional< double > | visibleTransmittance () const |
| Returns visible transmittance (unitless), if available. More... | |
Getters | |
| boost::optional< ConstructionBase > | construction () const |
| Returns the construction object. More... | |
| boost::optional< std::pair < ConstructionBase, int > > | constructionWithSearchDistance () const |
| Returns the construction object and the search distance that was needed to find the construction. More... | |
| bool | isConstructionDefaulted () const |
| Returns true if the construction is not directly referenced by this surface . More... | |
| boost::optional < PlanarSurfaceGroup > | planarSurfaceGroup () const |
| Returns the containing PlanarSurfaceGroup if available. More... | |
| boost::optional< Space > | space () const |
| Returns the containing Space if available. More... | |
| std::vector< Point3d > | vertices () const |
| Returns the vertices. More... | |
Setters | |
| bool | setVertices (const std::vector< Point3d > &vertices) |
| Sets the vertices. More... | |
| bool | setConstruction (const ConstructionBase &construction) |
| Sets the construction object. More... | |
| void | resetConstruction () |
| Resets the construction object. More... | |
| Public Member Functions inherited from openstudio::model::ParentObject | |
| std::vector< IddObjectType > | allowableChildTypes () const |
| Returns a vector of allowable children types. More... | |
| std::vector< ModelObject > | children () const |
| Return direct child objects in the Model. More... | |
| virtual | ~ParentObject () |
| Public Member Functions inherited from openstudio::model::ModelObject | |
| virtual | ~ModelObject () |
| ModelObject | clone () const |
| Creates a deep copy of this object, placing it in this object's model(). More... | |
| ModelObject | clone (Model model) const |
| Creates a deep copy of this object, placing it in model. More... | |
| Component | createComponent () const |
| Method for creating sharable Model snippets. More... | |
| Model | model () const |
| Returns the Model that contains this object. More... | |
| boost::optional< ParentObject > | parent () const |
| Return this object's parent in the hierarchy, if it has one. More... | |
| std::vector< ResourceObject > | resources () const |
| Get the resources directly used by this ModelObject. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectSources () const |
| Get all objects of type T that point to this object. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectSources (IddObjectType iddObjectType) const |
| Get all objects of type T that point to this object. More... | |
| template<typename T > | |
| boost::optional< T > | getModelObjectTarget (unsigned index) const |
| Get the object of type T pointed to by this object from field index. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectTargets () const |
| Get all objects of type T to which this object points. More... | |
| const std::vector< std::string > & | outputVariableNames () const |
| Get all output variables names that could be associated with this object. More... | |
| std::vector< OutputVariable > | outputVariables () const |
| Get all output variables associated with this object, must run simulation to generate data. More... | |
| boost::optional < openstudio::TimeSeries > | getData (const OutputVariable &variable, const std::string &envPeriod) const |
| Get data associated with this output variable and this object. More... | |
| std::vector< LifeCycleCost > | lifeCycleCosts () const |
| Returns the list of all LifeCycleCosts that refer to this object. More... | |
| std::vector< IdfObject > | removeLifeCycleCosts () |
| Removes all LifeCycleCosts that refer to this object. More... | |
| IddObjectType | iddObjectType () const |
| This is a virtual function that will tell you the type of iddObject you are dealing with. More... | |
| AdditionalProperties | additionalProperties () const |
| Returns this object's additional properties, constructing a new object if necessary. More... | |
| bool | hasAdditionalProperties () const |
| Returns true if this object has additional properties. More... | |
| std::vector< IdfObject > | removeAdditionalProperties () |
| Removes all additional properties that refer to this object. More... | |
| bool | setParent (ParentObject &newParent) |
| set the parent, child may have to call non-const methods on the parent More... | |
| bool | operator< (const ModelObject &right) const |
| bool | operator== (const ModelObject &other) const |
| equality test More... | |
| bool | operator!= (const ModelObject &other) const |
| inequality test More... | |
| std::vector< ScheduleTypeKey > | getScheduleTypeKeys (const Schedule &schedule) const |
| Return the ScheduleTypeKeys indicating how schedule is used in this object. More... | |
| boost::optional< double > | getAutosizedValue (std::string valueName, std::string unitString) const |
| Gets the autosized component value from the sql file. More... | |
| virtual std::vector < EMSActuatorNames > | emsActuatorNames () const |
| Return the names of the available ems actuators. More... | |
| virtual std::vector< std::string > | emsInternalVariableNames () const |
| Return the names of the available ems internal variables. More... | |
| boost::optional< ModelObject > | connectedObject (unsigned port) const |
| boost::optional< unsigned > | connectedObjectPort (unsigned port) const |
Static Public Member Functions | |
| static double | filmResistance (const FilmResistanceType &type) |
| Film resistances from ASHRAE Fundamentals, Chapter 25, Table 1 for non-reflective surfaces. More... | |
| static std::vector< PlanarSurface > | findPlanarSurfaces (const std::vector< PlanarSurface > &planarSurfaces, boost::optional< double > minDegreesFromNorth, boost::optional< double > maxDegreesFromNorth, boost::optional< double > minDegreesTilt, boost::optional< double > maxDegreesTilt, double tol=1) |
| Find PlanarSurfaces within angular range, specified in degrees in the site coordinate system, an unset optional means no limit. More... | |
| static double | stillAirFilmResistance (double tilt) |
| Film resistance of still air on surface with tilt (rad). More... | |
Related Functions | |
(Note that these are not member functions.) | |
| typedef boost::optional < PlanarSurface > | OptionalPlanarSurface |
| typedef std::vector < PlanarSurface > | PlanarSurfaceVector |
| Related Functions inherited from openstudio::model::ParentObject | |
| std::vector< ModelObject > | getRecursiveChildren (const ParentObject &object, bool includeLifeCycleCostsAndAdditionalProperties=false) |
| Returns object and all other objects accessible by calling children() on encountered ParentObjects . More... | |
| std::vector< ModelObject > | getRecursiveChildrenAndResources (const ModelObject &object) |
| Returns object and all other objects accessible by calling children() and resources() on encountered ModelObjects . More... | |
| Related Functions inherited from openstudio::model::ModelObject | |
| std::vector< ResourceObject > | getRecursiveResources (const ModelObject &object) |
| Returns all ResourceObjects accessible by recursively calling .resources() starting from object. More... | |
| typedef std::pair< std::string, std::string > | ScheduleTypeKey |
| Typedef for ScheduleTypeRegistry key. More... | |
| typedef std::pair< std::string, std::string > | ScheduleTypeKey |
| Typedef for ScheduleTypeRegistry key. More... | |
Constructors and Destructors | |
| virtual | ~PlanarSurface () |
| PlanarSurface (IddObjectType type, const std::vector< Point3d > &vertices, const Model &model) | |
| Constructs a new PlanarSurface object in the model. More... | |
Additional Inherited Members | |
| Protected Types inherited from openstudio::model::ModelObject | |
| typedef detail::ModelObject_Impl | ImplType |
| Protected Member Functions inherited from openstudio::model::ParentObject | |
| ParentObject (IddObjectType type, const Model &model) | |
| Constructs a new ParentObject object in the model. More... | |
| Protected Member Functions inherited from openstudio::model::ModelObject | |
| ModelObject (IddObjectType type, const Model &model, bool fastName=false) | |
| ModelObject (std::shared_ptr< detail::ModelObject_Impl > impl) | |
PlanarSurface is an abstract class derived from ParentObject.
PlanarSurface is a pure virtual class to consolodate functions dealing with surface geometry.
|
inlinevirtual |
|
protected |
Constructs a new PlanarSurface object in the model.
| double openstudio::model::PlanarSurface::azimuth | ( | ) | const |
Returns the surface's azimuth measured clockwise as angle between outward normal and local North (radians).
Throws openstudio::Exception if cannot compute outward normal for this surface.
| Point3d openstudio::model::PlanarSurface::centroid | ( | ) | const |
Return the centroid of this planar surface's vertices.
| boost::optional<ConstructionBase> openstudio::model::PlanarSurface::construction | ( | ) | const |
Returns the construction object.
If the planar surface is paired with an adjacent planar surface, attempts to resolve any surface matching conflict.
| boost::optional<std::pair<ConstructionBase, int> > openstudio::model::PlanarSurface::constructionWithSearchDistance | ( | ) | const |
Returns the construction object and the search distance that was needed to find the construction.
Does not consider adjacent planar surfaces.
| bool openstudio::model::PlanarSurface::equalVertices | ( | const PlanarSurface & | other | ) | const |
Check if this planar surface's vertices are equal to the other's in the building coordinate system.
| boost::optional<double> openstudio::model::PlanarSurface::exteriorVisibleAbsorbtance | ( | ) | const |
| boost::optional<double> openstudio::model::PlanarSurface::exteriorVisibleAbsorptance | ( | ) | const |
Returns exterior visible absorptance (unitless), if available.
Attribute name: exteriorVisibleAbsorptance
|
static |
Film resistances from ASHRAE Fundamentals, Chapter 25, Table 1 for non-reflective surfaces.
Units of m^2*K/W.
|
static |
Find PlanarSurfaces within angular range, specified in degrees in the site coordinate system, an unset optional means no limit.
Values for degrees from North are between 0 and 360 and for degrees tilt they are between 0 and 180. Note that maxDegreesFromNorth may be less than minDegreesFromNorth, e.g. to search between NorthWest and NorthEast set minDegreesFromNorth = 315 and maxDegreesFromNorth = 45. The value of maxDegreesTilt must be greater than or equal to minDegreesTilt. A tolerance of one degree is applied by default.
| std::vector<GeneratorPhotovoltaic> openstudio::model::PlanarSurface::generatorPhotovoltaics | ( | ) | const |
Returns any generator photovoltaics associated with this surface.
| double openstudio::model::PlanarSurface::grossArea | ( | ) | const |
Computes the surface's gross area (m^2).
Attribute name: grossArea
| boost::optional<double> openstudio::model::PlanarSurface::heatCapacity | ( | ) | const |
Returns the heat capacity of this surface in J/m^2*K, if available.
Attribute name: heatCapacity
| boost::optional<double> openstudio::model::PlanarSurface::interiorVisibleAbsorbtance | ( | ) | const |
| boost::optional<double> openstudio::model::PlanarSurface::interiorVisibleAbsorptance | ( | ) | const |
Returns interior visible absorptance (unitless), if available.
Attribute name: interiorVisibleAbsorptance
| bool openstudio::model::PlanarSurface::isAirWall | ( | ) | const |
Checks if this surface is an air wall, returns true if the Construction includes a single layer of type MaterialAirWall.
| bool openstudio::model::PlanarSurface::isConstructionDefaulted | ( | ) | const |
Returns true if the construction is not directly referenced by this surface .
| double openstudio::model::PlanarSurface::netArea | ( | ) | const |
Computes the surface's net area (m^2).
Attribute name: netArea
| Vector3d openstudio::model::PlanarSurface::outwardNormal | ( | ) | const |
Returns the outward normal vector in local coordinates.
Throws openstudio::Exception if cannot compute outward normal for this surface.
| boost::optional<PlanarSurfaceGroup> openstudio::model::PlanarSurface::planarSurfaceGroup | ( | ) | const |
Returns the containing PlanarSurfaceGroup if available.
| Plane openstudio::model::PlanarSurface::plane | ( | ) | const |
Get the plane, throws openstudio::Exception if cannot compute plane for this surface.
| void openstudio::model::PlanarSurface::resetConstruction | ( | ) |
Resets the construction object.
| bool openstudio::model::PlanarSurface::reverseEqualVertices | ( | const PlanarSurface & | other | ) | const |
Check if this planar surface's vertices are reverse equal to the other's in the building coordinate system.
| bool openstudio::model::PlanarSurface::setConstruction | ( | const ConstructionBase & | construction | ) |
Sets the construction object.
| bool openstudio::model::PlanarSurface::setThermalConductance | ( | double | value | ) |
Sets the conductance of this surface in W/m^2*K, if possible.
Value should not include any film coefficients. Attribute name: thermalConductance
| bool openstudio::model::PlanarSurface::setUFactor | ( | double | value | ) |
Sets the u-factor of this surface in W/m^2*K, if possible.
Value should already include appropriate standard film coefficients, assuming still air indoors and 15 mph outdoor air speed. Does not consider any custom SurfacePropertyConvectionCoefficients Attribute name: uFactor
| bool openstudio::model::PlanarSurface::setVertices | ( | const std::vector< Point3d > & | vertices | ) |
Sets the vertices.
| std::vector<ModelObject> openstudio::model::PlanarSurface::solarCollectors | ( | ) | const |
Returns any solar hot water collectors associated with this surface.
| boost::optional<Space> openstudio::model::PlanarSurface::space | ( | ) | const |
Returns the containing Space if available.
|
static |
Film resistance of still air on surface with tilt (rad).
Horizontal roof has tilt of 0 rad; horizontal floor/slab has tilt of pi rad.
| bool openstudio::model::PlanarSurface::subtractFromGrossArea | ( | ) | const |
Reports if user should subtract this surface's net area from parent's gross area to compute parent's net area (e.g.
true for a window).
| std::vector<SurfacePropertyConvectionCoefficients> openstudio::model::PlanarSurface::surfacePropertyConvectionCoefficients | ( | ) | const |
Returns any SurfacePropertyConvectionCoefficients associated with this surface, does not return SurfacePropertyConvectionCoefficientsMultipleSurface.
| boost::optional<double> openstudio::model::PlanarSurface::thermalConductance | ( | ) | const |
Returns the thermal conductance of this surface in W/m^2*K.
Does not include film coefficients. Attribute name: thermalConductance
| double openstudio::model::PlanarSurface::tilt | ( | ) | const |
Returns the surface's tilt measured as angle between outward normal and local up (radians).
Throws openstudio::Exception if cannot compute outward normal for this surface.
|
virtual |
Get a triangulation of this surface, subsurfaces will be replaced by holes in the triangulation.
| boost::optional<double> openstudio::model::PlanarSurface::uFactor | ( | ) | const |
Returns the u-factor of this surface.
Includes standard film coefficients, does not consider any custom SurfacePropertyConvectionCoefficients. Attribute name: uFactor
| std::vector<Point3d> openstudio::model::PlanarSurface::vertices | ( | ) | const |
Returns the vertices.
| boost::optional<double> openstudio::model::PlanarSurface::visibleTransmittance | ( | ) | const |
Returns visible transmittance (unitless), if available.
May require EnergyPlus simulation output. Attribute name: visibleTransmittance
|
related |
|
related |