 |
OpenStudio:model |
#include <Space.hpp>
Inheritance diagram for openstudio::model::Space:Public Member Functions | |
Constructors and Destructors | |
| Space (const Model &model) | |
| Creates a new space in the model, if a building level space type is defined then the space inherits that by default. More... | |
| virtual | ~Space () |
Getters | |
| bool | partofTotalFloorArea () const |
| bool | isPartofTotalFloorAreaDefaulted () const |
Setters | |
| bool | setPartofTotalFloorArea (bool partofTotalFloorArea) |
| void | resetPartofTotalFloorArea () |
Other | |
| boost::optional< SpaceType > | spaceType () const |
| Returns the space type for this space. More... | |
| bool | isSpaceTypeDefaulted () const |
| Returns true if space type for this space is inherited from the building. More... | |
| bool | setSpaceType (const SpaceType &spaceType) |
| Sets the space type for this space. More... | |
| void | resetSpaceType () |
| Resets the space type for this space. More... | |
| boost::optional < DefaultConstructionSet > | defaultConstructionSet () const |
| Returns the default construction set that this space references directly. More... | |
| boost::optional< ConstructionBase > | getDefaultConstruction (const PlanarSurface &planarSurface) const |
| Returns the default construction for this planar surface if available by searching (in order): This space's default construction set, search distance = 1 This space's space type's default construction set, search distance = 2 This space's building story's default construction set, search distance = 3 This space's building's default construction set, search distance = 4 This space's building's space type's default construction set, search distance = 5. More... | |
| boost::optional< std::pair < ConstructionBase, int > > | getDefaultConstructionWithSearchDistance (const PlanarSurface &planarSurface) const |
| bool | setDefaultConstructionSet (const DefaultConstructionSet &defaultConstructionSet) |
| Sets the default construction set for this space directly. More... | |
| void | resetDefaultConstructionSet () |
| Resets the default construction set for this space. More... | |
| boost::optional < DefaultScheduleSet > | defaultScheduleSet () const |
| Returns the default schedule set that this space references directly. More... | |
| boost::optional< Schedule > | getDefaultSchedule (const DefaultScheduleType &defaultScheduleType) const |
| Returns the default schedule set for the specified type if available by searching (in order): This space's default schedule set This space's space type's default schedule set This space's building story's default schedule set The building's default schedule set The building's space type's default schedule set. More... | |
| bool | setDefaultScheduleSet (const DefaultScheduleSet &defaultScheduleSet) |
| Sets the default schedule set for this space directly. More... | |
| void | resetDefaultScheduleSet () |
| Resets the default schedule set for this space. More... | |
| boost::optional< ThermalZone > | thermalZone () const |
| bool | setThermalZone (ThermalZone &thermalZone) |
| void | resetThermalZone () |
| boost::optional< BuildingStory > | buildingStory () const |
| bool | setBuildingStory (const BuildingStory &buildingStory) |
| void | resetBuildingStory () |
| boost::optional< BuildingUnit > | buildingUnit () const |
| bool | setBuildingUnit (const BuildingUnit &buildingUnit) |
| void | resetBuildingUnit () |
| std::vector< ShadingSurfaceGroup > | shadingSurfaceGroups () const |
| Returns all ShadingSurfaceGroups in this space. More... | |
| std::vector < InteriorPartitionSurfaceGroup > | interiorPartitionSurfaceGroups () const |
| Returns all InteriorPartitionSurfaceGroups in this space. More... | |
| std::vector< Surface > | surfaces () const |
| Returns all Surfaces in this space. More... | |
| std::vector< InternalMass > | internalMass () const |
| Returns all InternalMass in this space. More... | |
| std::vector< People > | people () const |
| Returns all People in this space. More... | |
| std::vector< Lights > | lights () const |
| Returns all Lights in this space. More... | |
| std::vector< Luminaire > | luminaires () const |
| Returns all Luminaires in this space. More... | |
| std::vector< ElectricEquipment > | electricEquipment () const |
| Returns all ElectricEquipment in this space. More... | |
| std::vector < ElectricEquipmentITEAirCooled > | electricEquipmentITEAirCooled () const |
| Returns all ElectricEquipmentITEAirCooled in this space. More... | |
| std::vector< GasEquipment > | gasEquipment () const |
| Returns all GasEquipment in this space. More... | |
| std::vector< HotWaterEquipment > | hotWaterEquipment () const |
| Returns all HotWaterEquipment in this space. More... | |
| std::vector< SteamEquipment > | steamEquipment () const |
| Returns all SteamEquipment in this space. More... | |
| std::vector< OtherEquipment > | otherEquipment () const |
| Returns all OtherEquipment in this space. More... | |
| std::vector< WaterUseEquipment > | waterUseEquipment () const |
| Returns all WaterUseEquipment in this space. More... | |
| std::vector< DaylightingControl > | daylightingControls () const |
| Returns all DaylightingControls in this space. More... | |
| std::vector< IlluminanceMap > | illuminanceMaps () const |
| Returns all IlluminanceMaps in this space. More... | |
| std::vector< GlareSensor > | glareSensors () const |
| Returns all GlareSensors in this space. More... | |
| std::vector < SpaceInfiltrationDesignFlowRate > | spaceInfiltrationDesignFlowRates () const |
| Returns all SpaceInfiltrationDesignFlowRate objects in this space. More... | |
| std::vector < SpaceInfiltrationEffectiveLeakageArea > | spaceInfiltrationEffectiveLeakageAreas () const |
| Returns all SpaceInfiltrationEffectiveLeakageArea objects in this space. More... | |
| std::vector < SpaceInfiltrationFlowCoefficient > | spaceInfiltrationFlowCoefficients () const |
| Returns all SpaceInfiltrationFlowCoefficient objects in this space. More... | |
| boost::optional < DesignSpecificationOutdoorAir > | designSpecificationOutdoorAir () const |
| Returns DesignSpecificationOutdoorAir for this space, if not set directly on this space then the SpaceType's DesignSpecificationOutdoorAir will be returned. More... | |
| bool | isDesignSpecificationOutdoorAirDefaulted () const |
| Returns true if DesignSpecificationOutdoorAir is not directly specified for this space. More... | |
| bool | setDesignSpecificationOutdoorAir (const DesignSpecificationOutdoorAir &designSpecificationOutdoorAir) |
| Sets DesignSpecificationOutdoorAir for this space. More... | |
| void | resetDesignSpecificationOutdoorAir () |
| Resets DesignSpecificationOutdoorAir for this space. More... | |
| int | multiplier () const |
| Returns the multiplier for this space, comes from thermal zone, defaults to 1. More... | |
| double | floorArea () const |
| Returns the floor area (m^2). More... | |
| double | exteriorArea () const |
| Returns the exterior area (gross area of surfaces with outdoor boundary condition) (m^2). More... | |
| double | exteriorWallArea () const |
| Returns the exterior wall area (gross area of surfaces with outdoor boundary condition) (m^2). More... | |
| double | volume () const |
| Returns the volume (m^3). More... | |
| double | numberOfPeople () const |
| Returns the number of people in the space (people). More... | |
| bool | setNumberOfPeople (double numberOfPeople) |
| Sets the number of people in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters. More... | |
| bool | setNumberOfPeople (double numberOfPeople, const People &templatePeople) |
| Sets the number of people in this space using templatePeople as a template for the remaining People and People definition parameters. More... | |
| double | peoplePerFloorArea () const |
| Returns the total people per floor area in this space (people/m^2). More... | |
| bool | setPeoplePerFloorArea (double peoplePerFloorArea) |
| Sets the people per floor area in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters. More... | |
| bool | setPeoplePerFloorArea (double peoplePerFloorArea, const People &templatePeople) |
| Sets the people per floor area in this space using templatePeople as a template for the remaining People and People definition parameters. More... | |
| double | floorAreaPerPerson () const |
| Returns the total floor area per person in this space (m^2/person). More... | |
| bool | setFloorAreaPerPerson (double floorAreaPerPerson) |
| Sets the floor area per person in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters. More... | |
| bool | setFloorAreaPerPerson (double floorAreaPerPerson, const People &templatePeople) |
| Sets the floor area per person in this Space using templatePeople as a template for the remaining People and People definition parameters. More... | |
| double | lightingPower () const |
| Returns the lighting power (W) of this space. More... | |
| bool | setLightingPower (double lightingPower) |
| Sets the lighting power in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters. More... | |
| bool | setLightingPower (double lightingPower, const Lights &templateLights) |
| Sets the lighting power in this space using templateLights as a template for the remaining Lights and Lights Definition parameters. More... | |
| double | lightingPowerPerFloorArea () const |
| Returns the lighting power density (W/m^2) of this zone. More... | |
| bool | setLightingPowerPerFloorArea (double lightingPowerPerFloorArea) |
| Sets the lighting power per floor area in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters. More... | |
| bool | setLightingPowerPerFloorArea (double lightingPowerPerFloorArea, const Lights &templateLights) |
| Sets the lighting power per floor area in this space using templateLights as a template for the remaining Lights and Lights Definition parameters. More... | |
| double | lightingPowerPerPerson () const |
| Returns the lighting power per person (W/person) of this zone. More... | |
| bool | setLightingPowerPerPerson (double lightingPowerPerPerson) |
| Sets the lighting power per person in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters. More... | |
| bool | setLightingPowerPerPerson (double lightingPowerPerPerson, const Lights &templateLights) |
| Sets the lighting power per person in this space using templateLights as a template for the remaining Lights and Lights Definition parameters. More... | |
| double | electricEquipmentPower () const |
| Returns the electric equipment power (W) of this space. More... | |
| bool | setElectricEquipmentPower (double electricEquipmentPower) |
| Sets the electric equipment power in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| bool | setElectricEquipmentPower (double electricEquipmentPower, const ElectricEquipment &templateElectricEquipment) |
| Sets the electric equipment power in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| double | electricEquipmentPowerPerFloorArea () const |
| Returns the electric equipment power density (W/m^2) of this space. More... | |
| bool | setElectricEquipmentPowerPerFloorArea (double electricEquipmentPowerPerFloorArea) |
| Sets the electric equipment power per floor area in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| bool | setElectricEquipmentPowerPerFloorArea (double electricEquipmentPowerPerFloorArea, const ElectricEquipment &templateElectricEquipment) |
| Sets the electric equipment power per floor area in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| double | electricEquipmentPowerPerPerson () const |
| Returns the electric equipment power per person (W/person) of this space. More... | |
| bool | setElectricEquipmentPowerPerPerson (double electricEquipmentPowerPerPerson) |
| Sets the electric equipment power per person in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| bool | setElectricEquipmentPowerPerPerson (double electricEquipmentPowerPerPerson, const ElectricEquipment &templateElectricEquipment) |
| Sets the electric equipment power per person in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters. More... | |
| double | electricEquipmentITEAirCooledPower () const |
| Returns the IT equipment power (W) of this space. More... | |
| double | electricEquipmentITEAirCooledPowerPerFloorArea () const |
| Returns the IT equipment power density (W/m^2) of this space. More... | |
| double | gasEquipmentPower () const |
| Returns the gas equipment power (W) of this space. More... | |
| bool | setGasEquipmentPower (double gasEquipmentPower) |
| Sets the gas equipment power in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| bool | setGasEquipmentPower (double gasEquipmentPower, const GasEquipment &templateGasEquipment) |
| Sets the gas equipment power in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| double | gasEquipmentPowerPerFloorArea () const |
| Returns the gas equipment power density (W/m^2) of this space. More... | |
| bool | setGasEquipmentPowerPerFloorArea (double gasEquipmentPowerPerFloorArea) |
| Sets the gas equipment power per floor area in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| bool | setGasEquipmentPowerPerFloorArea (double gasEquipmentPowerPerFloorArea, const GasEquipment &templateGasEquipment) |
| Sets the gas equipment power per floor area in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| double | gasEquipmentPowerPerPerson () const |
| Returns the gas equipment power per person (W/person) of this space. More... | |
| bool | setGasEquipmentPowerPerPerson (double gasEquipmentPowerPerPerson) |
| Sets the gas equipment power per person in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| bool | setGasEquipmentPowerPerPerson (double gasEquipmentPowerPerPerson, const GasEquipment &templateGasEquipment) |
| Sets the gas equipment power per person in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters. More... | |
| double | infiltrationDesignFlowRate () const |
| Returns the infiltration design flow rate (m^3/s) in the space. More... | |
| double | infiltrationDesignFlowPerSpaceFloorArea () const |
| Returns the infiltration design flow per space floor area (m^3/m^2*s) in the space. More... | |
| double | infiltrationDesignFlowPerExteriorSurfaceArea () const |
| Returns the infiltration design flow per exterior surface area (m^3/m^2*s) in the space. More... | |
| double | infiltrationDesignFlowPerExteriorWallArea () const |
| Returns the infiltration design flow per exterior wall area (m^3/m^2*s) in the space. More... | |
| double | infiltrationDesignAirChangesPerHour () const |
| Returns the infiltration design air changes per hour (1/h) in the space. More... | |
| void | hardApplySpaceType (bool hardSizeLoads) |
| The following functionality is used by the EnergyPlus translator, the primary aim is to preserve information while putting the space into a state where it can easily be translated to EnergyPlus: Clone the space type if there is a space type Hard apply schedules to space type loads if there is a space type Move space loads from space type to space if there is a space type Merge space type default constructions with space default constructions if there is a space type Hard apply schedules to space loads If hard sizing loads, make each space load refer to unique definition and hard size it Remove the cloned space type if there is a space type. More... | |
| void | hardApplySpaceLoadSchedules () |
| Set all schedules for child space loads to their default value if there is one. More... | |
| void | hardApplyConstructions () |
| Set all constructions for child surfaces to their default value if there is one. More... | |
| void | unmatchSurfaces () |
| Unmatch any matched surfaces and sub surfaces in this space. More... | |
| void | matchSurfaces (Space &other) |
| Match surfaces and sub surfaces in this space with those in the other. More... | |
| void | intersectSurfaces (Space &other) |
| Intersect surfaces in this space with those in the other. More... | |
| std::vector< Surface > | findSurfaces (boost::optional< double > minDegreesFromNorth, boost::optional< double > maxDegreesFromNorth, boost::optional< double > minDegreesTilt, boost::optional< double > maxDegreesTilt, double tol=1) |
| Find surfaces within angular range, specified in degrees and in the site coordinate system, an unset optional means no limit. More... | |
| std::vector< Point3d > | floorPrint () const |
| Returns the floor print of the space. More... | |
| bool | isPlenum () const |
| Return true if the ThermalZone is a plenum, otherwise returns false. More... | |
| double | exposedPerimeter (const Polygon3d &buildingPerimeter) const |
| Public Member Functions inherited from openstudio::model::PlanarSurfaceGroup | |
| openstudio::BoundingBox | boundingBox () const |
| Get the BoundingBox in local coordinates. More... | |
| openstudio::BoundingBox | boundingBoxBuildingCoordinates () const |
| Get the BoundingBox in building coordinates. More... | |
| openstudio::BoundingBox | boundingBoxParentCoordinates () const |
| Get the BoundingBox in parent coordinates. More... | |
| openstudio::BoundingBox | boundingBoxSiteCoordinates () const |
| Get the BoundingBox in site coordinates. More... | |
| openstudio::Transformation | buildingTransformation () const |
| Returns the transformation from local coordinates to building coordinates. More... | |
| bool | changeTransformation (const openstudio::Transformation &transformation) |
| Changes the transformation from local coordinates to parent coordinates, this method alter geometry of children relative to the group so that it stays in the same place with the new transformation. More... | |
| bool | setTransformation (const openstudio::Transformation &transformation) |
| Sets the transformation from local coordinates to parent coordinates, this method can be used to move the group. More... | |
| openstudio::Transformation | siteTransformation () const |
| Returns the transformation from local coordinates to site coordinates. More... | |
| openstudio::Transformation | transformation () const |
| Returns the transformation from local coordinates to parent coordinates. More... | |
| virtual | ~PlanarSurfaceGroup () |
| double | directionofRelativeNorth () const |
| bool | isDirectionofRelativeNorthDefaulted () const |
| double | xOrigin () const |
| bool | isXOriginDefaulted () const |
| double | yOrigin () const |
| bool | isYOriginDefaulted () const |
| double | zOrigin () const |
| bool | isZOriginDefaulted () const |
| bool | setDirectionofRelativeNorth (double directionofRelativeNorth) |
| void | resetDirectionofRelativeNorth () |
| bool | setXOrigin (double xOrigin) |
| void | resetXOrigin () |
| bool | setYOrigin (double yOrigin) |
| void | resetYOrigin () |
| bool | setZOrigin (double zOrigin) |
| void | resetZOrigin () |
| Public Member Functions inherited from openstudio::model::ParentObject | |
| std::vector< IddObjectType > | allowableChildTypes () const |
| Returns a vector of allowable children types. More... | |
| std::vector< ModelObject > | children () const |
| Return direct child objects in the Model. More... | |
| virtual | ~ParentObject () |
| Public Member Functions inherited from openstudio::model::ModelObject | |
| virtual | ~ModelObject () |
| ModelObject | clone () const |
| Creates a deep copy of this object, placing it in this object's model(). More... | |
| ModelObject | clone (Model model) const |
| Creates a deep copy of this object, placing it in model. More... | |
| Component | createComponent () const |
| Method for creating sharable Model snippets. More... | |
| Model | model () const |
| Returns the Model that contains this object. More... | |
| boost::optional< ParentObject > | parent () const |
| Return this object's parent in the hierarchy, if it has one. More... | |
| std::vector< ResourceObject > | resources () const |
| Get the resources directly used by this ModelObject. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectSources () const |
| Get all objects of type T that point to this object. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectSources (IddObjectType iddObjectType) const |
| Get all objects of type T that point to this object. More... | |
| template<typename T > | |
| boost::optional< T > | getModelObjectTarget (unsigned index) const |
| Get the object of type T pointed to by this object from field index. More... | |
| template<typename T > | |
| std::vector< T > | getModelObjectTargets () const |
| Get all objects of type T to which this object points. More... | |
| const std::vector< std::string > & | outputVariableNames () const |
| Get all output variables names that could be associated with this object. More... | |
| std::vector< OutputVariable > | outputVariables () const |
| Get all output variables associated with this object, must run simulation to generate data. More... | |
| boost::optional < openstudio::TimeSeries > | getData (const OutputVariable &variable, const std::string &envPeriod) const |
| Get data associated with this output variable and this object. More... | |
| std::vector< LifeCycleCost > | lifeCycleCosts () const |
| Returns the list of all LifeCycleCosts that refer to this object. More... | |
| std::vector< IdfObject > | removeLifeCycleCosts () |
| Removes all LifeCycleCosts that refer to this object. More... | |
| IddObjectType | iddObjectType () const |
| This is a virtual function that will tell you the type of iddObject you are dealing with. More... | |
| AdditionalProperties | additionalProperties () const |
| Returns this object's additional properties, constructing a new object if necessary. More... | |
| bool | hasAdditionalProperties () const |
| Returns true if this object has additional properties. More... | |
| std::vector< IdfObject > | removeAdditionalProperties () |
| Removes all additional properties that refer to this object. More... | |
| bool | setParent (ParentObject &newParent) |
| set the parent, child may have to call non-const methods on the parent More... | |
| bool | operator< (const ModelObject &right) const |
| bool | operator== (const ModelObject &other) const |
| equality test More... | |
| bool | operator!= (const ModelObject &other) const |
| inequality test More... | |
| std::vector< ScheduleTypeKey > | getScheduleTypeKeys (const Schedule &schedule) const |
| Return the ScheduleTypeKeys indicating how schedule is used in this object. More... | |
| boost::optional< double > | getAutosizedValue (std::string valueName, std::string unitString) const |
| Gets the autosized component value from the sql file. More... | |
| virtual std::vector < EMSActuatorNames > | emsActuatorNames () const |
| Return the names of the available ems actuators. More... | |
| virtual std::vector< std::string > | emsInternalVariableNames () const |
| Return the names of the available ems internal variables. More... | |
| boost::optional< ModelObject > | connectedObject (unsigned port) const |
| boost::optional< unsigned > | connectedObjectPort (unsigned port) const |
Static Public Member Functions | |
| static boost::optional< Space > | fromFloorPrint (const std::vector< Point3d > &floorPrint, double floorHeight, Model &model) |
| Create a space from a floor print and extrude distance. More... | |
| static IddObjectType | iddObjectType () |
Related Functions | |
(Note that these are not member functions.) | |
| typedef boost::optional< Space > | OptionalSpace |
| typedef std::vector< Space > | SpaceVector |
| Related Functions inherited from openstudio::model::PlanarSurfaceGroup | |
| typedef boost::optional < PlanarSurfaceGroup > | OptionalPlanarSurfaceGroup |
| typedef std::vector < PlanarSurfaceGroup > | PlanarSurfaceGroupVector |
| Related Functions inherited from openstudio::model::ParentObject | |
| std::vector< ModelObject > | getRecursiveChildren (const ParentObject &object, bool includeLifeCycleCostsAndAdditionalProperties=false, bool includeUsedResources=true) |
| Returns object and all other objects accessible by calling children() on encountered ParentObjects . More... | |
| std::vector< ModelObject > | getRecursiveChildrenAndResources (const ModelObject &object) |
| Returns object and all other objects accessible by calling children() and resources() on encountered ModelObjects . More... | |
| Related Functions inherited from openstudio::model::ModelObject | |
| std::vector< ResourceObject > | getRecursiveResources (const ModelObject &object) |
| Returns all ResourceObjects accessible by recursively calling .resources() starting from object. More... | |
Additional Inherited Members | |
| Protected Types inherited from openstudio::model::ModelObject | |
| typedef detail::ModelObject_Impl | ImplType |
| Protected Member Functions inherited from openstudio::model::PlanarSurfaceGroup | |
| PlanarSurfaceGroup (IddObjectType iddObjectType, const Model &model) | |
| Protected Member Functions inherited from openstudio::model::ParentObject | |
| ParentObject (IddObjectType type, const Model &model) | |
| Constructs a new ParentObject object in the model. More... | |
| Protected Member Functions inherited from openstudio::model::ModelObject | |
| ModelObject (IddObjectType type, const Model &model, bool fastName=false) | |
| ModelObject (std::shared_ptr< detail::ModelObject_Impl > impl) | |
Space is a PlanarSurfaceGroup that wraps the OpenStudio IDD object 'OS_Space'.
|
explicit |
Creates a new space in the model, if a building level space type is defined then the space inherits that by default.
|
inlinevirtual |
| boost::optional<BuildingStory> openstudio::model::Space::buildingStory | ( | ) | const |
| boost::optional<BuildingUnit> openstudio::model::Space::buildingUnit | ( | ) | const |
| std::vector<DaylightingControl> openstudio::model::Space::daylightingControls | ( | ) | const |
Returns all DaylightingControls in this space.
| boost::optional<DefaultConstructionSet> openstudio::model::Space::defaultConstructionSet | ( | ) | const |
Returns the default construction set that this space references directly.
| boost::optional<DefaultScheduleSet> openstudio::model::Space::defaultScheduleSet | ( | ) | const |
Returns the default schedule set that this space references directly.
| boost::optional<DesignSpecificationOutdoorAir> openstudio::model::Space::designSpecificationOutdoorAir | ( | ) | const |
Returns DesignSpecificationOutdoorAir for this space, if not set directly on this space then the SpaceType's DesignSpecificationOutdoorAir will be returned.
| std::vector<ElectricEquipment> openstudio::model::Space::electricEquipment | ( | ) | const |
Returns all ElectricEquipment in this space.
| std::vector<ElectricEquipmentITEAirCooled> openstudio::model::Space::electricEquipmentITEAirCooled | ( | ) | const |
Returns all ElectricEquipmentITEAirCooled in this space.
| double openstudio::model::Space::electricEquipmentITEAirCooledPower | ( | ) | const |
Returns the IT equipment power (W) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::electricEquipmentITEAirCooledPowerPerFloorArea | ( | ) | const |
Returns the IT equipment power density (W/m^2) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::electricEquipmentPower | ( | ) | const |
Returns the electric equipment power (W) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::electricEquipmentPowerPerFloorArea | ( | ) | const |
Returns the electric equipment power density (W/m^2) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::electricEquipmentPowerPerPerson | ( | ) | const |
Returns the electric equipment power per person (W/person) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::exposedPerimeter | ( | const Polygon3d & | buildingPerimeter | ) | const |
| double openstudio::model::Space::exteriorArea | ( | ) | const |
Returns the exterior area (gross area of surfaces with outdoor boundary condition) (m^2).
Does not include space multiplier in calculation.
| double openstudio::model::Space::exteriorWallArea | ( | ) | const |
Returns the exterior wall area (gross area of surfaces with outdoor boundary condition) (m^2).
Does not include space multiplier in calculation.
| std::vector<Surface> openstudio::model::Space::findSurfaces | ( | boost::optional< double > | minDegreesFromNorth, |
| boost::optional< double > | maxDegreesFromNorth, | ||
| boost::optional< double > | minDegreesTilt, | ||
| boost::optional< double > | maxDegreesTilt, | ||
| double | tol = 1 |
||
| ) |
Find surfaces within angular range, specified in degrees and in the site coordinate system, an unset optional means no limit.
Values for degrees from North are between 0 and 360 and for degrees tilt they are between 0 and 180. Note that maxDegreesFromNorth may be less than minDegreesFromNorth, e.g. to search between NorthWest and NorthEast set minDegreesFromNorth = 315 and maxDegreesFromNorth = 45. The value of maxDegreesTilt must be greater than or equal to minDegreesTilt. A tolerance of one degree is applied by default.
| double openstudio::model::Space::floorArea | ( | ) | const |
Returns the floor area (m^2).
Does not include area of floor surfaces which are air walls. Does not consider if space is included in building floor area. Does not include space multiplier in calculation.
| double openstudio::model::Space::floorAreaPerPerson | ( | ) | const |
Returns the total floor area per person in this space (m^2/person).
Does not include space multiplier in calculation. Does include people multiplier in calculation.
| std::vector<Point3d> openstudio::model::Space::floorPrint | ( | ) | const |
Returns the floor print of the space.
Will return empty vector if all floors in space are not on the same x,y plane.
|
static |
Create a space from a floor print and extrude distance.
| std::vector<GasEquipment> openstudio::model::Space::gasEquipment | ( | ) | const |
Returns all GasEquipment in this space.
| double openstudio::model::Space::gasEquipmentPower | ( | ) | const |
Returns the gas equipment power (W) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::gasEquipmentPowerPerFloorArea | ( | ) | const |
Returns the gas equipment power density (W/m^2) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| double openstudio::model::Space::gasEquipmentPowerPerPerson | ( | ) | const |
Returns the gas equipment power per person (W/person) of this space.
Does not include space multiplier in calculation. Does include equipment multiplier in calculation.
| boost::optional<ConstructionBase> openstudio::model::Space::getDefaultConstruction | ( | const PlanarSurface & | planarSurface | ) | const |
Returns the default construction for this planar surface if available by searching (in order): This space's default construction set, search distance = 1 This space's space type's default construction set, search distance = 2 This space's building story's default construction set, search distance = 3 This space's building's default construction set, search distance = 4 This space's building's space type's default construction set, search distance = 5.
| boost::optional<std::pair<ConstructionBase, int> > openstudio::model::Space::getDefaultConstructionWithSearchDistance | ( | const PlanarSurface & | planarSurface | ) | const |
| boost::optional<Schedule> openstudio::model::Space::getDefaultSchedule | ( | const DefaultScheduleType & | defaultScheduleType | ) | const |
Returns the default schedule set for the specified type if available by searching (in order): This space's default schedule set This space's space type's default schedule set This space's building story's default schedule set The building's default schedule set The building's space type's default schedule set.
| std::vector<GlareSensor> openstudio::model::Space::glareSensors | ( | ) | const |
Returns all GlareSensors in this space.
| void openstudio::model::Space::hardApplyConstructions | ( | ) |
Set all constructions for child surfaces to their default value if there is one.
| void openstudio::model::Space::hardApplySpaceLoadSchedules | ( | ) |
Set all schedules for child space loads to their default value if there is one.
| void openstudio::model::Space::hardApplySpaceType | ( | bool | hardSizeLoads | ) |
The following functionality is used by the EnergyPlus translator, the primary aim is to preserve information while putting the space into a state where it can easily be translated to EnergyPlus: Clone the space type if there is a space type Hard apply schedules to space type loads if there is a space type Move space loads from space type to space if there is a space type Merge space type default constructions with space default constructions if there is a space type Hard apply schedules to space loads If hard sizing loads, make each space load refer to unique definition and hard size it Remove the cloned space type if there is a space type.
| std::vector<HotWaterEquipment> openstudio::model::Space::hotWaterEquipment | ( | ) | const |
Returns all HotWaterEquipment in this space.
|
static |
| std::vector<IlluminanceMap> openstudio::model::Space::illuminanceMaps | ( | ) | const |
Returns all IlluminanceMaps in this space.
| double openstudio::model::Space::infiltrationDesignAirChangesPerHour | ( | ) | const |
Returns the infiltration design air changes per hour (1/h) in the space.
Ignores SpaceInfiltrationEffectiveLeakageArea and SpaceInfiltrationFlowCoefficient objects. Does not include space multiplier in calculation.
| double openstudio::model::Space::infiltrationDesignFlowPerExteriorSurfaceArea | ( | ) | const |
Returns the infiltration design flow per exterior surface area (m^3/m^2*s) in the space.
Ignores SpaceInfiltrationEffectiveLeakageArea and SpaceInfiltrationFlowCoefficient objects. Does not include space multiplier in calculation.
| double openstudio::model::Space::infiltrationDesignFlowPerExteriorWallArea | ( | ) | const |
Returns the infiltration design flow per exterior wall area (m^3/m^2*s) in the space.
Ignores SpaceInfiltrationEffectiveLeakageArea and SpaceInfiltrationFlowCoefficient objects. Does not include space multiplier in calculation.
| double openstudio::model::Space::infiltrationDesignFlowPerSpaceFloorArea | ( | ) | const |
Returns the infiltration design flow per space floor area (m^3/m^2*s) in the space.
Ignores SpaceInfiltrationEffectiveLeakageArea and SpaceInfiltrationFlowCoefficient objects. Does not include space multiplier in calculation.
| double openstudio::model::Space::infiltrationDesignFlowRate | ( | ) | const |
Returns the infiltration design flow rate (m^3/s) in the space.
Ignores SpaceInfiltrationEffectiveLeakageArea and SpaceInfiltrationFlowCoefficient objects. Does not include space multiplier in calculation.
| std::vector<InteriorPartitionSurfaceGroup> openstudio::model::Space::interiorPartitionSurfaceGroups | ( | ) | const |
Returns all InteriorPartitionSurfaceGroups in this space.
| std::vector<InternalMass> openstudio::model::Space::internalMass | ( | ) | const |
Returns all InternalMass in this space.
| void openstudio::model::Space::intersectSurfaces | ( | Space & | other | ) |
Intersect surfaces in this space with those in the other.
| bool openstudio::model::Space::isDesignSpecificationOutdoorAirDefaulted | ( | ) | const |
Returns true if DesignSpecificationOutdoorAir is not directly specified for this space.
| bool openstudio::model::Space::isPartofTotalFloorAreaDefaulted | ( | ) | const |
| bool openstudio::model::Space::isPlenum | ( | ) | const |
Return true if the ThermalZone is a plenum, otherwise returns false.
| bool openstudio::model::Space::isSpaceTypeDefaulted | ( | ) | const |
Returns true if space type for this space is inherited from the building.
| double openstudio::model::Space::lightingPower | ( | ) | const |
Returns the lighting power (W) of this space.
Does not include space multiplier in calculation. Does include lighting multiplier in calculation.
| double openstudio::model::Space::lightingPowerPerFloorArea | ( | ) | const |
Returns the lighting power density (W/m^2) of this zone.
Does not include space multiplier in calculation. Does include lighting multiplier in calculation.
| double openstudio::model::Space::lightingPowerPerPerson | ( | ) | const |
Returns the lighting power per person (W/person) of this zone.
Does not include space multiplier in calculation. Does include lighting multiplier in calculation.
| std::vector<Luminaire> openstudio::model::Space::luminaires | ( | ) | const |
Returns all Luminaires in this space.
| void openstudio::model::Space::matchSurfaces | ( | Space & | other | ) |
Match surfaces and sub surfaces in this space with those in the other.
| int openstudio::model::Space::multiplier | ( | ) | const |
Returns the multiplier for this space, comes from thermal zone, defaults to 1.
| double openstudio::model::Space::numberOfPeople | ( | ) | const |
Returns the number of people in the space (people).
Does not include space multiplier in calculation. Does include people multiplier in calculation.
| std::vector<OtherEquipment> openstudio::model::Space::otherEquipment | ( | ) | const |
Returns all OtherEquipment in this space.
| bool openstudio::model::Space::partofTotalFloorArea | ( | ) | const |
| double openstudio::model::Space::peoplePerFloorArea | ( | ) | const |
Returns the total people per floor area in this space (people/m^2).
Does not include space multiplier in calculation. Does include people multiplier in calculation.
| void openstudio::model::Space::resetBuildingStory | ( | ) |
| void openstudio::model::Space::resetBuildingUnit | ( | ) |
| void openstudio::model::Space::resetDefaultConstructionSet | ( | ) |
Resets the default construction set for this space.
| void openstudio::model::Space::resetDefaultScheduleSet | ( | ) |
Resets the default schedule set for this space.
| void openstudio::model::Space::resetDesignSpecificationOutdoorAir | ( | ) |
Resets DesignSpecificationOutdoorAir for this space.
| void openstudio::model::Space::resetPartofTotalFloorArea | ( | ) |
| void openstudio::model::Space::resetSpaceType | ( | ) |
Resets the space type for this space.
| void openstudio::model::Space::resetThermalZone | ( | ) |
| bool openstudio::model::Space::setBuildingStory | ( | const BuildingStory & | buildingStory | ) |
| bool openstudio::model::Space::setBuildingUnit | ( | const BuildingUnit & | buildingUnit | ) |
| bool openstudio::model::Space::setDefaultConstructionSet | ( | const DefaultConstructionSet & | defaultConstructionSet | ) |
Sets the default construction set for this space directly.
| bool openstudio::model::Space::setDefaultScheduleSet | ( | const DefaultScheduleSet & | defaultScheduleSet | ) |
Sets the default schedule set for this space directly.
| bool openstudio::model::Space::setDesignSpecificationOutdoorAir | ( | const DesignSpecificationOutdoorAir & | designSpecificationOutdoorAir | ) |
Sets DesignSpecificationOutdoorAir for this space.
| bool openstudio::model::Space::setElectricEquipmentPower | ( | double | electricEquipmentPower | ) |
Sets the electric equipment power in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setElectricEquipmentPower | ( | double | electricEquipmentPower, |
| const ElectricEquipment & | templateElectricEquipment | ||
| ) |
Sets the electric equipment power in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setElectricEquipmentPowerPerFloorArea | ( | double | electricEquipmentPowerPerFloorArea | ) |
Sets the electric equipment power per floor area in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setElectricEquipmentPowerPerFloorArea | ( | double | electricEquipmentPowerPerFloorArea, |
| const ElectricEquipment & | templateElectricEquipment | ||
| ) |
Sets the electric equipment power per floor area in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setElectricEquipmentPowerPerPerson | ( | double | electricEquipmentPowerPerPerson | ) |
Sets the electric equipment power per person in this space by using electricEquipment()[0], if it exists, as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setElectricEquipmentPowerPerPerson | ( | double | electricEquipmentPowerPerPerson, |
| const ElectricEquipment & | templateElectricEquipment | ||
| ) |
Sets the electric equipment power per person in this space using templateElectricEquipment as a template for the remaining ElectricEquipment and ElectricEquipment Definition parameters.
All other electricEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final ElectricEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setFloorAreaPerPerson | ( | double | floorAreaPerPerson | ) |
Sets the floor area per person in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setFloorAreaPerPerson | ( | double | floorAreaPerPerson, |
| const People & | templatePeople | ||
| ) |
Sets the floor area per person in this Space using templatePeople as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPower | ( | double | gasEquipmentPower | ) |
Sets the gas equipment power in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPower | ( | double | gasEquipmentPower, |
| const GasEquipment & | templateGasEquipment | ||
| ) |
Sets the gas equipment power in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPowerPerFloorArea | ( | double | gasEquipmentPowerPerFloorArea | ) |
Sets the gas equipment power per floor area in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPowerPerFloorArea | ( | double | gasEquipmentPowerPerFloorArea, |
| const GasEquipment & | templateGasEquipment | ||
| ) |
Sets the gas equipment power per floor area in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPowerPerPerson | ( | double | gasEquipmentPowerPerPerson | ) |
Sets the gas equipment power per person in this space by using gasEquipment()[0], if it exists, as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setGasEquipmentPowerPerPerson | ( | double | gasEquipmentPowerPerPerson, |
| const GasEquipment & | templateGasEquipment | ||
| ) |
Sets the gas equipment power per person in this space using templateGasEquipment as a template for the remaining GasEquipment and GasEquipment Definition parameters.
All other gasEquipment() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final GasEquipment object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPower | ( | double | lightingPower | ) |
Sets the lighting power in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPower | ( | double | lightingPower, |
| const Lights & | templateLights | ||
| ) |
Sets the lighting power in this space using templateLights as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPowerPerFloorArea | ( | double | lightingPowerPerFloorArea | ) |
Sets the lighting power per floor area in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPowerPerFloorArea | ( | double | lightingPowerPerFloorArea, |
| const Lights & | templateLights | ||
| ) |
Sets the lighting power per floor area in this space using templateLights as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPowerPerPerson | ( | double | lightingPowerPerPerson | ) |
Sets the lighting power per person in this space by using lights()[0], if it exists, as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setLightingPowerPerPerson | ( | double | lightingPowerPerPerson, |
| const Lights & | templateLights | ||
| ) |
Sets the lighting power per person in this space using templateLights as a template for the remaining Lights and Lights Definition parameters.
All other lights() and luminaires() in this space will be removed, the SpaceType will be made unique and modified, if necessary, and the final Lights object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setNumberOfPeople | ( | double | numberOfPeople | ) |
Sets the number of people in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setNumberOfPeople | ( | double | numberOfPeople, |
| const People & | templatePeople | ||
| ) |
Sets the number of people in this space using templatePeople as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setPartofTotalFloorArea | ( | bool | partofTotalFloorArea | ) |
| bool openstudio::model::Space::setPeoplePerFloorArea | ( | double | peoplePerFloorArea | ) |
Sets the people per floor area in this space by using people()[0], if it exists, as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setPeoplePerFloorArea | ( | double | peoplePerFloorArea, |
| const People & | templatePeople | ||
| ) |
Sets the people per floor area in this space using templatePeople as a template for the remaining People and People definition parameters.
All other people() in this SpaceType will be removed, the SpaceType will be made unique and modified, if necessary, and the final People object will be attached directly to this Space, not to a SpaceType.
| bool openstudio::model::Space::setSpaceType | ( | const SpaceType & | spaceType | ) |
Sets the space type for this space.
| bool openstudio::model::Space::setThermalZone | ( | ThermalZone & | thermalZone | ) |
| std::vector<ShadingSurfaceGroup> openstudio::model::Space::shadingSurfaceGroups | ( | ) | const |
Returns all ShadingSurfaceGroups in this space.
| std::vector<SpaceInfiltrationDesignFlowRate> openstudio::model::Space::spaceInfiltrationDesignFlowRates | ( | ) | const |
Returns all SpaceInfiltrationDesignFlowRate objects in this space.
| std::vector<SpaceInfiltrationEffectiveLeakageArea> openstudio::model::Space::spaceInfiltrationEffectiveLeakageAreas | ( | ) | const |
Returns all SpaceInfiltrationEffectiveLeakageArea objects in this space.
| std::vector<SpaceInfiltrationFlowCoefficient> openstudio::model::Space::spaceInfiltrationFlowCoefficients | ( | ) | const |
Returns all SpaceInfiltrationFlowCoefficient objects in this space.
| boost::optional<SpaceType> openstudio::model::Space::spaceType | ( | ) | const |
Returns the space type for this space.
| std::vector<SteamEquipment> openstudio::model::Space::steamEquipment | ( | ) | const |
Returns all SteamEquipment in this space.
| std::vector<Surface> openstudio::model::Space::surfaces | ( | ) | const |
Returns all Surfaces in this space.
| boost::optional<ThermalZone> openstudio::model::Space::thermalZone | ( | ) | const |
| void openstudio::model::Space::unmatchSurfaces | ( | ) |
Unmatch any matched surfaces and sub surfaces in this space.
| double openstudio::model::Space::volume | ( | ) | const |
Returns the volume (m^3).
Does not include space multiplier in calculation.
| std::vector<WaterUseEquipment> openstudio::model::Space::waterUseEquipment | ( | ) | const |
Returns all WaterUseEquipment in this space.
|
related |
|
related |