|
|
virtual | ~AirflowNetworkZone () |
|
|
ThermalZone | thermalZone () const |
| Returns the associated thermal zone. More...
|
|
std::string | ventilationControlMode () const |
| Returns the ventilation control mode. More...
|
|
bool | isVentilationControlModeDefaulted () const |
| Returns true if the ventilation control mode is defaulted. More...
|
|
boost::optional< Schedule > | ventilationControlZoneTemperatureSetpointSchedule () const |
| Returns the ventilation control zone temperature setpoint schedule, if any. More...
|
|
double | minimumVentingOpenFactor () const |
| Returns the minimum venting open factor. More...
|
|
bool | isMinimumVentingOpenFactorDefaulted () const |
| Returns true if the minimum venting open factor is defaulted. More...
|
|
double | indoorandOutdoorTemperatureDifferenceLowerLimitForMaximumVentingOpenFactor () const |
| Returns the temperature difference lower limit for maximum venting factor. More...
|
|
bool | isIndoorandOutdoorTemperatureDifferenceLowerLimitForMaximumVentingOpenFactorDefaulted () const |
| Returns true if the temperature difference lower limit for maximum venting factor is defaulted. More...
|
|
double | indoorandOutdoorTemperatureDifferenceUpperLimitforMinimumVentingOpenFactor () const |
| Returns the temperature difference upper limit for minimum venting factor. More...
|
|
bool | isIndoorandOutdoorTemperatureDifferenceUpperLimitforMinimumVentingOpenFactorDefaulted () const |
| Returns true if the temperature difference upper limit for minimum venting factor is defaulted. More...
|
|
double | indoorandOutdoorEnthalpyDifferenceLowerLimitForMaximumVentingOpenFactor () const |
| Returns the enthalpy difference lower limit for maximum venting factor. More...
|
|
bool | isIndoorandOutdoorEnthalpyDifferenceLowerLimitForMaximumVentingOpenFactorDefaulted () const |
| Returns true if the enthalpy difference lower limit for maximum venting factor is defaulted. More...
|
|
double | indoorandOutdoorEnthalpyDifferenceUpperLimitforMinimumVentingOpenFactor () const |
| Returns the enthalpy difference upper limit for minimum venting factor. More...
|
|
bool | isIndoorandOutdoorEnthalpyDifferenceUpperLimitforMinimumVentingOpenFactorDefaulted () const |
| Returns true if the enthalpy difference upper limit for minimum venting factor is defaulted. More...
|
|
boost::optional< Schedule > | ventingAvailabilitySchedule () const |
| Returns the venting availability schedule, if any. More...
|
|
std::string | singleSidedWindPressureCoefficientAlgorithm () const |
| Returns the single sided wind pressure algorithm. More...
|
|
bool | isSingleSidedWindPressureCoefficientAlgorithmDefaulted () const |
| Returns true if the single sided wind pressure algorithm is defaulted. More...
|
|
double | facadeWidth () const |
| Returns the single sided wind pressure algorithm facade width. More...
|
|
bool | isFacadeWidthDefaulted () const |
| Returns true if the single sided wind pressure algorithm facade width is defaulted. More...
|
|
boost::optional
< AirflowNetworkOccupantVentilationControl > | occupantVentilationControl () const |
| Returns the occupant ventilation control object for this zone, if any. More...
|
|
|
bool | setVentilationControlMode (const std::string &ventilationControlMode) |
| Sets the ventilation control mode. More...
|
|
void | resetVentilationControlMode () |
| Resets the ventilation control mode. More...
|
|
bool | setVentilationControlZoneTemperatureSetpointSchedule (Schedule &schedule) |
| Sets the ventilation control zone temperature setpoint schedule. More...
|
|
void | resetVentilationControlZoneTemperatureSetpointSchedule () |
| Resets the ventilation control zone temperature setpoint schedule. More...
|
|
bool | setMinimumVentingOpenFactor (double minimumVentingOpenFactor) |
| Sets the minimum venting open factor. More...
|
|
void | resetMinimumVentingOpenFactor () |
| Resets the minimum venting open factor. More...
|
|
bool | setIndoorandOutdoorTemperatureDifferenceLowerLimitForMaximumVentingOpenFactor (double indoorandOutdoorTemperatureDifferenceLowerLimitForMaximumVentingOpenFactor) |
| Sets the temperature difference lower limit for maximum venting factor. More...
|
|
void | resetIndoorandOutdoorTemperatureDifferenceLowerLimitForMaximumVentingOpenFactor () |
| Resets the temperature difference lower limit for maximum venting factor. More...
|
|
bool | setIndoorandOutdoorTemperatureDifferenceUpperLimitforMinimumVentingOpenFactor (double indoorandOutdoorTemperatureDifferenceUpperLimitforMinimumVentingOpenFactor) |
| Sets the temperature difference upper limit for minimum venting factor. More...
|
|
void | resetIndoorandOutdoorTemperatureDifferenceUpperLimitforMinimumVentingOpenFactor () |
| Resets the temperature difference upper limit for minimum venting factor. More...
|
|
bool | setIndoorandOutdoorEnthalpyDifferenceLowerLimitForMaximumVentingOpenFactor (double indoorandOutdoorEnthalpyDifferenceLowerLimitForMaximumVentingOpenFactor) |
| Sets the enthalpy difference lower limit for maximum venting factor. More...
|
|
void | resetIndoorandOutdoorEnthalpyDifferenceLowerLimitForMaximumVentingOpenFactor () |
| Resets the enthalpy difference lower limit for maximum venting factor. More...
|
|
bool | setIndoorandOutdoorEnthalpyDifferenceUpperLimitforMinimumVentingOpenFactor (double indoorandOutdoorEnthalpyDifferenceUpperLimitforMinimumVentingOpenFactor) |
| Sets the enthalphy difference upper limit for minimum venting factor. More...
|
|
void | resetIndoorandOutdoorEnthalpyDifferenceUpperLimitforMinimumVentingOpenFactor () |
| Resets the enthalphy difference upper limit for minimum venting factor. More...
|
|
bool | setVentingAvailabilitySchedule (Schedule &schedule) |
| Sets the venting availability schedule. More...
|
|
void | resetVentingAvailabilitySchedule () |
| Resets the venting availability schedule. More...
|
|
bool | setSingleSidedWindPressureCoefficientAlgorithm (const std::string &singleSidedWindPressureCoefficientAlgorithm) |
| Sets the single sided wind pressure algorithm. More...
|
|
void | resetSingleSidedWindPressureCoefficientAlgorithm () |
| Resets the single sided wind pressure algorithm. More...
|
|
bool | setFacadeWidth (double facadeWidth) |
| Sets the single sided wind pressure algorithm facade width. More...
|
|
void | resetFacadeWidth () |
| Resets the single sided wind pressure algorithm facade width. More...
|
|
bool | setOccupantVentilationControl (const AirflowNetworkOccupantVentilationControl &airflowNetworkOccupantVentilationControl) |
| Sets the occupant ventilation control object for this zone. More...
|
|
void | resetOccupantVentilationControl () |
| Resets the occupant ventilation control object. More...
|
|
| AirflowNetworkNode (IddObjectType type, const Model &model) |
|
virtual | ~AirflowNetworkNode () |
|
virtual | ~ModelObject () |
|
ModelObject | clone () const |
| Creates a deep copy of this object, placing it in this object's model(). More...
|
|
ModelObject | clone (Model model) const |
| Creates a deep copy of this object, placing it in model. More...
|
|
Component | createComponent () const |
| Method for creating sharable Model snippets. More...
|
|
Model | model () const |
| Returns the Model that contains this object. More...
|
|
boost::optional< ParentObject > | parent () const |
| Return this object's parent in the hierarchy, if it has one. More...
|
|
std::vector< ResourceObject > | resources () const |
| Get the resources directly used by this ModelObject. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectSources () const |
| Get all objects of type T that point to this object. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectSources (IddObjectType iddObjectType) const |
| Get all objects of type T that point to this object. More...
|
|
template<typename T > |
boost::optional< T > | getModelObjectTarget (unsigned index) const |
| Get the object of type T pointed to by this object from field index. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectTargets () const |
| Get all objects of type T to which this object points. More...
|
|
const std::vector< std::string > & | outputVariableNames () const |
| Get all output variables names that could be associated with this object. More...
|
|
std::vector< OutputVariable > | outputVariables () const |
| Get all output variables associated with this object, must run simulation to generate data. More...
|
|
boost::optional
< openstudio::TimeSeries > | getData (const OutputVariable &variable, const std::string &envPeriod) const |
| Get data associated with this output variable and this object. More...
|
|
std::vector< LifeCycleCost > | lifeCycleCosts () const |
| Returns the list of all LifeCycleCosts that refer to this object. More...
|
|
std::vector< IdfObject > | removeLifeCycleCosts () |
| Removes all LifeCycleCosts that refer to this object. More...
|
|
IddObjectType | iddObjectType () const |
| This is a virtual function that will tell you the type of iddObject you are dealing with. More...
|
|
AdditionalProperties | additionalProperties () const |
| Returns this object's additional properties, constructing a new object if necessary. More...
|
|
bool | hasAdditionalProperties () const |
| Returns true if this object has additional properties. More...
|
|
std::vector< IdfObject > | removeAdditionalProperties () |
| Removes all additional properties that refer to this object. More...
|
|
boost::optional< std::string > | cadObjectId () const |
|
bool | setCADObjectId (const std::string &cadObjectId) |
|
boost::optional< std::string > | gbXMLId () const |
|
bool | setGBXMLId (const std::string &gbXMLId) |
|
boost::optional< std::string > | displayName () const |
|
bool | setDisplayName (const std::string &displayName) |
|
bool | setParent (ParentObject &newParent) |
| set the parent, child may have to call non-const methods on the parent More...
|
|
bool | operator< (const ModelObject &right) const |
|
bool | operator== (const ModelObject &other) const |
| equality test More...
|
|
bool | operator!= (const ModelObject &other) const |
| inequality test More...
|
|
std::vector< ScheduleTypeKey > | getScheduleTypeKeys (const Schedule &schedule) const |
| Return the ScheduleTypeKeys indicating how schedule is used in this object. More...
|
|
boost::optional< double > | getAutosizedValue (std::string valueName, std::string unitString) const |
| Gets the autosized component value from the sql file. More...
|
|
virtual std::vector
< EMSActuatorNames > | emsActuatorNames () const |
| Return the names of the available ems actuators. More...
|
|
virtual std::vector< std::string > | emsInternalVariableNames () const |
| Return the names of the available ems internal variables. More...
|
|
boost::optional< ModelObject > | connectedObject (unsigned port) const |
|
boost::optional< unsigned > | connectedObjectPort (unsigned port) const |
|