#include <Model.hpp>

Inheritance diagram for openstudio::model::Model:

Public Member Functions
void	applySizingValues ()
	For each object in the model with autosizable fields, retrieves the autosized values from the sizing run and then sets these values in the object explicitly. More...

void	autosize ()
	For each object in the model with autosizable fields, sets all autosizable fields to 'autosize'. More...

void	connect (ModelObject sourceObject, unsigned sourcePort, ModelObject targetObject, unsigned targetPort) const
	Connects the sourcePort on the source ModelObject to the targetPort on the target ModelObject. More...

void	disconnect (ModelObject object, unsigned port)
	Disconnects the port on the given ModelObject. More...

template<>
Building	getUniqueModelObject ()

template<>
FoundationKivaSettings	getUniqueModelObject ()

template<>
OutputControlFiles	getUniqueModelObject ()

template<>
OutputControlReportingTolerances	getUniqueModelObject ()

template<>
OutputControlTableStyle	getUniqueModelObject ()

template<>
OutputControlTimestamp	getUniqueModelObject ()

template<>
OutputDiagnostics	getUniqueModelObject ()

template<>
OutputDebuggingData	getUniqueModelObject ()

template<>
OutputJSON	getUniqueModelObject ()

template<>
OutputSQLite	getUniqueModelObject ()

template<>
OutputEnergyManagementSystem	getUniqueModelObject ()

template<>
OutputTableSummaryReports	getUniqueModelObject ()

template<>
OutputSchedules	getUniqueModelObject ()

template<>
OutputConstructions	getUniqueModelObject ()

template<>
PerformancePrecisionTradeoffs	getUniqueModelObject ()

template<>
LifeCycleCostParameters	getUniqueModelObject ()

template<>
SizingParameters	getUniqueModelObject ()

template<>
RadianceParameters	getUniqueModelObject ()

template<>
RunPeriod	getUniqueModelObject ()

template<>
RunPeriodControlDaylightSavingTime	getUniqueModelObject ()

template<>
YearDescription	getUniqueModelObject ()

template<>
Site	getUniqueModelObject ()

template<>
SiteGroundReflectance	getUniqueModelObject ()

template<>
SiteWaterMainsTemperature	getUniqueModelObject ()

template<>
SiteGroundTemperatureBuildingSurface	getUniqueModelObject ()

template<>
SiteGroundTemperatureFCfactorMethod	getUniqueModelObject ()

template<>
SiteGroundTemperatureDeep	getUniqueModelObject ()

template<>
SiteGroundTemperatureShallow	getUniqueModelObject ()

template<>
Facility	getUniqueModelObject ()

template<>
WeatherFile	getUniqueModelObject ()

template<>
SimulationControl	getUniqueModelObject ()

template<>
LightingSimulationControl	getUniqueModelObject ()

template<>
AirflowNetworkSimulationControl	getUniqueModelObject ()

template<>
InsideSurfaceConvectionAlgorithm	getUniqueModelObject ()

template<>
OutsideSurfaceConvectionAlgorithm	getUniqueModelObject ()

template<>
HeatBalanceAlgorithm	getUniqueModelObject ()

template<>
ZoneAirContaminantBalance	getUniqueModelObject ()

template<>
ZoneAirHeatBalanceAlgorithm	getUniqueModelObject ()

template<>
ZoneAirMassFlowConservation	getUniqueModelObject ()

template<>
ZoneCapacitanceMultiplierResearchSpecial	getUniqueModelObject ()

template<>
ConvergenceLimits	getUniqueModelObject ()

template<>
ShadowCalculation	getUniqueModelObject ()

template<>
Timestep	getUniqueModelObject ()

template<>
ClimateZones	getUniqueModelObject ()

template<>
EnvironmentalImpactFactors	getUniqueModelObject ()

template<>
ExternalInterface	getUniqueModelObject ()

boost::optional< ComponentData >	insertComponent (const Component &component)
	Inserts Component into Model and returns the primary object, if possible. More...

std::vector< ModelObject >	modelObjects (bool sorted=false) const
	Get all model objects. More...

bool	operator== (const Model &other) const
	Equality test, tests if this Model shares the same implementation object with other. More...

std::vector < openstudio::IdfObject >	purgeUnusedResourceObjects ()
	Removes all ResourceObjects with nonResourceObjectUseCount() == 0. More...

std::vector < openstudio::IdfObject >	purgeUnusedResourceObjects (IddObjectType iddObjectType)
	Removes all ResourceObjects of given IddObjectType with directUseCount() == 0. More...

Constructors and Destructors
	Model ()
	Creates a new, empty Model. More...

	Model (const openstudio::IdfFile &idfFile)
	Creates a new Model with one ModelObject for each IdfObject in the given IdfFile. More...

	Model (const openstudio::Workspace &workspace)
	Creates a new Model with one ModelObject for each WorkspaceObjects in the given Workspace. More...

virtual	~Model ()=default

	Model (const Model &other)=default

	Model (Model &&other)=default

Model &	operator= (const Model &)=default

Model &	operator= (Model &&)=default

Getters
WorkflowJSON	workflowJSON () const
	Get the WorkflowJSON. More...

boost::optional< SqlFile >	sqlFile () const
	Returns the EnergyPlus output SqlFile if set. More...

boost::optional< Building >	building () const
	Get the Building object if there is one, this implementation uses a cached reference to the Building object which can be significantly faster than calling getOptionalUniqueModelObject<Building>(). More...

boost::optional < FoundationKivaSettings >	foundationKivaSettings () const
	Get the FoundationKivaSettings object if there is one, this implementation uses a cached reference to the FoundationKivaSettings object which can be significantly faster than calling getOptionalUniqueModelObject<FoundationKivaSettings>(). More...

boost::optional < OutputControlFiles >	outputControlFiles () const
	Get the OutputControlFiles object if there is one, this implementation uses a cached reference to the OutputControlFiles object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlFiles>(). More...

boost::optional < OutputControlReportingTolerances >	outputControlReportingTolerances () const
	Get the OutputControlReportingTolerances object if there is one, this implementation uses a cached reference to the OutputControlReportingTolerances object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlReportingTolerances>(). More...

boost::optional < OutputControlTableStyle >	outputControlTableStyle () const
	Get the OutputControlTableStyle object if there is one, this implementation uses a cached reference to the OutputControlTableStyle object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlTableStyle>(). More...

boost::optional < OutputControlTimestamp >	outputControlTimestamp () const
	Get the OutputControlTimestamp object if there is one, this implementation uses a cached reference to the OutputControlTimestamp object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlTimestamp>(). More...

boost::optional < OutputDiagnostics >	outputDiagnostics () const
	Get the OutputDiagnostics object if there is one, this implementation uses a cached reference to the OutputDiagnostics object which can be significantly faster than calling getOptionalUniqueModelObject<OutputDiagnostics>(). More...

boost::optional < OutputDebuggingData >	outputDebuggingData () const
	Get the OutputDebuggingData object if there is one, this implementation uses a cached reference to the OutputDebuggingData object which can be significantly faster than calling getOptionalUniqueModelObject<OutputDebuggingData>(). More...

boost::optional< OutputJSON >	outputJSON () const
	Get the OutputJSON object if there is one, this implementation uses a cached reference to the OutputJSON object which can be significantly faster than calling getOptionalUniqueModelObject<OutputJSON>(). More...

boost::optional< OutputSQLite >	outputSQLite () const
	Get the OutputSQLite object if there is one, this implementation uses a cached reference to the OutputSQLite object which can be significantly faster than calling getOptionalUniqueModelObject<OutputSQLite>(). More...

boost::optional < OutputEnergyManagementSystem >	outputEnergyManagementSystem () const
	Get the OutputEnergyManagementSystem object if there is one, this implementation uses a cached reference to the OutputEnergyManagementSystem object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlFiles>(). More...

boost::optional < OutputTableSummaryReports >	outputTableSummaryReports () const
	Get the OutputTableSummaryReports object if there is one, this implementation uses a cached reference to the OutputTableSummaryReports object which can be significantly faster than calling getOptionalUniqueModelObject<OutputTableSummaryReports>(). More...

boost::optional< OutputSchedules >	outputSchedules () const
	Get the OutputSchedules object if there is one, this implementation uses a cached reference to the OutputSchedules object which can be significantly faster than calling getOptionalUniqueModelObject<OutputSchedules>(). More...

boost::optional < OutputConstructions >	outputConstructions () const
	Get the OutputConstructions object if there is one, this implementation uses a cached reference to the OutputConstructions object which can be significantly faster than calling getOptionalUniqueModelObject<OutputConstructions>(). More...

boost::optional < PerformancePrecisionTradeoffs >	performancePrecisionTradeoffs () const
	Get the PerformancePrecisionTradeoffs object if there is one, this implementation uses a cached reference to the PerformancePrecisionTradeoffs object which can be significantly faster than calling getOptionalUniqueModelObject<PerformancePrecisionTradeoffs>(). More...

boost::optional < LifeCycleCostParameters >	lifeCycleCostParameters () const
	Get the LifeCycleCostParameters object if there is one, this implementation uses a cached reference to the LifeCycleCostParameters object which can be significantly faster than calling getOptionalUniqueModelObject<LifeCycleCostParameters>(). More...

boost::optional< SizingParameters >	sizingParameters () const
	Get the SizingParameters object if there is one, this implementation uses a cached reference to the SizingParameters object which can be significantly faster than calling getOptionalUniqueModelObject<SizingParameters>(). More...

boost::optional < RadianceParameters >	radianceParameters () const
	Get the RadianceParameters object if there is one, this implementation uses a cached reference to the RadianceParameters object which can be significantly faster than calling getOptionalUniqueModelObject<RadianceParameters>(). More...

boost::optional< RunPeriod >	runPeriod () const
	Get the RunPeriod object if there is one, this implementation uses a cached reference to the RunPeriod object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriod>(). More...

boost::optional < RunPeriodControlDaylightSavingTime >	runPeriodControlDaylightSavingTime () const
	Get the RunPeriodControlDaylightSavingTime object if there is one, this implementation uses a cached reference to the RunPeriodControlDaylightSavingTime object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriodControlDaylightSavingTime>(). More...

boost::optional< YearDescription >	yearDescription () const
	Get the YearDescription object if there is one, this implementation uses a cached reference to the YearDescription object which can be significantly faster than calling getOptionalUniqueModelObject<YearDescription>(). More...

boost::optional< Site >	site () const
	Get the Site object if there is one, this implementation uses a cached reference to the Site object which can be significantly faster than calling getOptionalUniqueModelObject<Site>(). More...

boost::optional < SiteGroundReflectance >	siteGroundReflectance () const
	Get the SiteGroundReflectance object if there is one, this implementation uses a cached reference to the SiteGroundReflectance object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundReflectance>(). More...

boost::optional < SiteWaterMainsTemperature >	siteWaterMainsTemperature () const
	Get the SiteWaterMainsTemperature object if there is one, this implementation uses a cached reference to the SiteWaterMainsTemperature object which can be significantly faster than calling getOptionalUniqueModelObject<SiteWaterMainsTemperature>(). More...

boost::optional < SiteGroundTemperatureBuildingSurface >	siteGroundTemperatureBuildingSurface () const
	Get the SiteGroundTemperatureBuildingSurface object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureBuildingSurface object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureBuildingSurface>(). More...

boost::optional < SiteGroundTemperatureFCfactorMethod >	siteGroundTemperatureFCfactorMethod () const
	Get the SiteGroundTemperatureFCfactorMethod object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureFCfactorMethod object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureFCfactorMethod>(). More...

boost::optional < SiteGroundTemperatureDeep >	siteGroundTemperatureDeep () const
	Get the SiteGroundTemperatureDeep object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureDeep object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureDeep>(). More...

boost::optional < SiteGroundTemperatureShallow >	siteGroundTemperatureShallow () const
	Get the SiteGroundTemperatureShallow object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureShallow object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureShallow>(). More...

boost::optional< Facility >	facility () const
	Get the Facility object if there is one, this implementation uses a cached reference to the Facility object which can be significantly faster than calling getOptionalUniqueModelObject<Facility>(). More...

boost::optional< WeatherFile >	weatherFile () const
	Get the WeatherFile object if there is one, this implementation uses a cached reference to the WeatherFile object which can be significantly faster than calling getOptionalUniqueModelObject<WeatherFile>(). More...

boost::optional < SimulationControl >	simulationControl () const
	Get the SimulationControl object if there is one, this implementation uses a cached reference to the SimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<SimulationControl>(). More...

boost::optional < LightingSimulationControl >	lightingSimulationControl () const
	Get the LightingSimulationControl object if there is one, this implementation uses a cached reference to the LightingSimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<LightingSimulationControl>(). More...

boost::optional < AirflowNetworkSimulationControl >	airflowNetworkSimulationControl () const
	Get the AirflowNetworkSimulationControl object if there is one, this implementation uses a cached reference to the AirflowNetworkSimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<AirflowNetworkSimulationControl>(). More...

boost::optional < InsideSurfaceConvectionAlgorithm >	insideSurfaceConvectionAlgorithm () const
	Get the InsideSurfaceConvectionAlgorithm object if there is one, this implementation uses a cached reference to the InsideSurfaceConvectionAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<InsideSurfaceConvectionAlgorithm>(). More...

boost::optional < OutsideSurfaceConvectionAlgorithm >	outsideSurfaceConvectionAlgorithm () const
	Get the OutsideSurfaceConvectionAlgorithm object if there is one, this implementation uses a cached reference to the OutsideSurfaceConvectionAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<OutsideSurfaceConvectionAlgorithm>(). More...

boost::optional < HeatBalanceAlgorithm >	heatBalanceAlgorithm () const
	Get the HeatBalanceAlgorithm object if there is one, this implementation uses a cached reference to the HeatBalanceAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<HeatBalanceAlgorithm>(). More...

boost::optional < ZoneAirContaminantBalance >	zoneAirContaminantBalance () const
	Get the ZoneAirContaminantBalance object if there is one, this implementation uses a cached reference to the ZoneAirContaminantBalance object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirContaminantBalance>(). More...

boost::optional < ZoneAirHeatBalanceAlgorithm >	zoneAirHeatBalanceAlgorithm () const
	Get the ZoneAirHeatBalanceAlgorithm object if there is one, this implementation uses a cached reference to the ZoneAirHeatBalanceAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirHeatBalanceAlgorithm>(). More...

boost::optional < ZoneAirMassFlowConservation >	zoneAirMassFlowConservation () const
	Get the ZoneAirMassFlowConservation object if there is one, this implementation uses a cached reference to the ZoneAirMassFlowConservation object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirMassFlowConservation>(). More...

boost::optional < ZoneCapacitanceMultiplierResearchSpecial >	zoneCapacitanceMultiplierResearchSpecial () const
	Get the ZoneCapacitanceMultiplierResearchSpecial object if there is one, this implementation uses a cached reference to the ZoneCapacitanceMultiplierResearchSpecial object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneCapacitanceMultiplierResearchSpecial>(). More...

boost::optional < ConvergenceLimits >	convergenceLimits () const
	Get the ConvergenceLimits object if there is one, this implementation uses a cached reference to the ConvergenceLimits object which can be significantly faster than calling getOptionalUniqueModelObject<ConvergenceLimits>(). More...

boost::optional < ShadowCalculation >	shadowCalculation () const
	Get the ShadowCalculation object if there is one, this implementation uses a cached reference to the ShadowCalculation object which can be significantly faster than calling getOptionalUniqueModelObject<ShadowCalculation>(). More...

boost::optional< Timestep >	timestep () const
	Get the Timestep object if there is one, this implementation uses a cached reference to the Timestep object which can be significantly faster than calling getOptionalUniqueModelObject<Timestep>(). More...

boost::optional< ClimateZones >	climateZones () const
	Get the ClimateZones object if there is one, this implementation uses a cached reference to the ClimateZones object which can be significantly faster than calling getOptionalUniqueModelObject<ClimateZones>(). More...

boost::optional < EnvironmentalImpactFactors >	environmentalImpactFactors () const
	Get the EnvironmentalImpactFactors object if there is one, this implementation uses a cached reference to the EnvironmentalImpactFactors object which can be significantly faster than calling getOptionalUniqueModelObject<EnvironmentalImpactFactors>(). More...

boost::optional < ExternalInterface >	externalInterface () const
	Get the ExternalInterface object if there is one, this implementation uses a cached reference to the ExternalInterface object which can be significantly faster than calling getOptionalUniqueModelObject<ExternalInterface>(). More...

boost::optional< int >	calendarYear () const
	Get or create the YearDescription object if there is one, then call method from YearDescription. More...

std::string	dayofWeekforStartDay () const

bool	isDayofWeekforStartDayDefaulted () const

bool	isLeapYear () const

bool	isIsLeapYearDefaulted () const

bool	setCalendarYear (int calendarYear)

void	resetCalendarYear ()

bool	setDayofWeekforStartDay (const std::string &dayofWeekforStartDay)

void	resetDayofWeekforStartDay ()

bool	setIsLeapYear (bool isLeapYear)

void	resetIsLeapYear ()

int	assumedYear ()

openstudio::Date	makeDate (openstudio::MonthOfYear monthOfYear, unsigned dayOfMonth)

openstudio::Date	makeDate (unsigned monthOfYear, unsigned dayOfMonth)

openstudio::Date	makeDate (openstudio::NthDayOfWeekInMonth n, openstudio::DayOfWeek dayOfWeek, openstudio::MonthOfYear monthOfYear)

openstudio::Date	makeDate (unsigned dayOfYear)

Schedule	alwaysOnDiscreteSchedule () const
	Get an always on schedule with discrete type limits if there is one. More...

std::string	alwaysOnDiscreteScheduleName () const
	Get the always on schedule with discrete type limits name. More...

Schedule	alwaysOffDiscreteSchedule () const
	Get an always off schedule with discrete type limits if there is one. More...

std::string	alwaysOffDiscreteScheduleName () const
	Get the always off schedule with discrete type limits name. More...

Schedule	alwaysOnContinuousSchedule () const
	Get an always on schedule with continuous type limits if there is one. More...

std::string	alwaysOnContinuousScheduleName () const
	Get the always on schedule with continuous type limits name. More...

Node	outdoorAirNode () const
	Get a Node named 'Model Outdoor Air Node' (intended to be forward translated to an OutdoorAir:Node) and not connected to a PlantLoop or AirLoopHVAC. More...

SpaceType	plenumSpaceType () const
	Get the space type used for plenums if there is one. More...

std::string	plenumSpaceTypeName () const
	Get the space type name used for plenums. More...

Setters
bool	setWorkflowJSON (const WorkflowJSON &workflowJSON)
	Set the WorkflowJSON. More...

void	resetWorkflowJSON ()
	Reset the WorkflowJSON. More...

bool	setSqlFile (const SqlFile &sqlFile)
	Sets the EnergyPlus output SqlFile. More...

bool	resetSqlFile ()
	Resets the EnergyPlus output SqlFile. More...

Template Methods
template<typename T >
boost::optional< T >	getModelObject (const Handle &handle) const
	Returns the ModelObject referenced by handle if it is of type T. More...

template<typename T >
T	getUniqueModelObject ()
	Returns the unique ModelObject of type T, creates a one if none are found. More...

template<typename T >
boost::optional< T >	getOptionalUniqueModelObject () const
	Returns the unique ModelObject of type T if it is found. More...

template<typename T >
std::vector< T >	getModelObjects (bool sorted=false) const
	Returns all ModelObjects of type T. More...

template<typename T >
std::vector< T >	getConcreteModelObjects () const
	Returns all ModelObjects of type T, using T::iddObjectType() to speed up the search. More...

template<typename T >
std::vector< T >	getModelObjects (const std::vector< openstudio::Handle > &handles) const
	Returns the subset of ModelObjects referenced by handles which are of type T. More...

template<typename T >
boost::optional< T >	getModelObjectByName (const std::string &name) const
	Returns the ModelObjects of type T with name (exactMatch). More...

template<typename T >
std::vector< T >	getModelObjectsByName (const std::string &name, bool exactMatch=true) const
	Returns all ModelObjects of type T with given name. More...

template<typename T >
boost::optional< T >	getConcreteModelObjectByName (const std::string &name) const

template<typename T >
std::vector< T >	getConcreteModelObjectsByName (const std::string &name) const

Static Public Member Functions
static boost::optional< Model >	load (const path &osmPath)
	Load Model from file, attempts to load WorkflowJSON from standard path. More...

static boost::optional< Model >	load (const path &osmPath, const path &workflowJSONPath)
	Load Model and WorkflowJSON from files, fails if either osm or workflowJSON cannot be loaded. More...

Related Functions
(Note that these are not member functions.)
bool	compareInputAndOutput (const ModelObject &object, const std::string &attributeName, double inputResult, double outputResult, double tol, LogLevel logLevel=LogLevel::Debug)
	Compare inputResult to outputResult. More...

using	ModelVector = std::vector< Model >

using	OptionalModel = boost::optional< Model >

Detailed Description

Model derives from Workspace and is a container for ModelObjects as defined by the OpenStudio IDD.

The OpenStudio Model is primarily a container for ModelObjects which together define a complete or partial model of a building for energy simulation. A ModelObject cannot exist outside of a Model which ensures that each ModelObject can access the full Model to search for related ModelObjects. Model also accepts a connection to EnergyPlus simulation output through the SqlFile access to the SQLite output of EnergyPlus. Each ModelObject may then access simulation output in its own context. Connection to simulation data from other simulation engines is planned for the future.

The OpenStudio Model input data model is based on the schema defined by the OpenStudio IDD. Each concrete ModelObject wraps a particular data type in the OpenStudio IDD and Model enforces collection level constraints such as preventing multiple definitions of unique objects, updating reference fields that point from one ModelObject to another when the target's name changes, etc. Most of Model's capabilities for managing data according to an IDD schema are implemented in the Workspace base class. See the Workspace documentation in the utilities sub-project for more information about Workspace.

Constructor & Destructor Documentation

openstudio::model::Model::Model ( )

Creates a new, empty Model.

openstudio::model::Model::Model ( const openstudio::IdfFile & idfFile )

explicit

Creates a new Model with one ModelObject for each IdfObject in the given IdfFile.

Any unwrapped IDD types will be wrapped with GenericModelObject.

openstudio::model::Model::Model ( const openstudio::Workspace & workspace )

explicit

Creates a new Model with one ModelObject for each WorkspaceObjects in the given Workspace.

Any unwrapped IDD types will be wrapped with GenericModelObject.

virtual openstudio::model::Model::~Model ( )

virtualdefault

openstudio::model::Model::Model ( const Model & other )

default

openstudio::model::Model::Model ( Model && other )

default

Member Function Documentation

boost::optional<AirflowNetworkSimulationControl> openstudio::model::Model::airflowNetworkSimulationControl ( ) const

Get the AirflowNetworkSimulationControl object if there is one, this implementation uses a cached reference to the AirflowNetworkSimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<AirflowNetworkSimulationControl>().

Schedule openstudio::model::Model::alwaysOffDiscreteSchedule ( ) const

Get an always off schedule with discrete type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOffDiscreteScheduleName ( ) const

Get the always off schedule with discrete type limits name.

Schedule openstudio::model::Model::alwaysOnContinuousSchedule ( ) const

Get an always on schedule with continuous type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOnContinuousScheduleName ( ) const

Get the always on schedule with continuous type limits name.

Schedule openstudio::model::Model::alwaysOnDiscreteSchedule ( ) const

Get an always on schedule with discrete type limits if there is one.

create a new schedule if necessary and add it to the model

std::string openstudio::model::Model::alwaysOnDiscreteScheduleName ( ) const

Get the always on schedule with discrete type limits name.

void openstudio::model::Model::applySizingValues ( )

For each object in the model with autosizable fields, retrieves the autosized values from the sizing run and then sets these values in the object explicitly.

Requires a sql file with sizing run results from a previous simulation. For example, if a ChillerElectricEIR's Reference Capacity was previously autosized to 120,000W by the sizing run, this method would find the 120,000W in the sql file and then set the Reference Capacity field to 120,000W explicitly. Next time a simulation is run, the chiller's capacity will be 120,000W, it will not be autosized during the sizing run.

int openstudio::model::Model::assumedYear ( )

void openstudio::model::Model::autosize ( )

For each object in the model with autosizable fields, sets all autosizable fields to 'autosize'.

Fields that previously contained hard-sized values will be overwritten by 'autosize.'

boost::optional<Building> openstudio::model::Model::building ( ) const

Get the Building object if there is one, this implementation uses a cached reference to the Building object which can be significantly faster than calling getOptionalUniqueModelObject<Building>().

boost::optional<int> openstudio::model::Model::calendarYear ( ) const

Get or create the YearDescription object if there is one, then call method from YearDescription.

boost::optional<ClimateZones> openstudio::model::Model::climateZones ( ) const

Get the ClimateZones object if there is one, this implementation uses a cached reference to the ClimateZones object which can be significantly faster than calling getOptionalUniqueModelObject<ClimateZones>().

void openstudio::model::Model::connect	(	ModelObject	sourceObject,
		unsigned	sourcePort,
		ModelObject	targetObject,
		unsigned	targetPort
	)		const

Connects the sourcePort on the source ModelObject to the targetPort on the target ModelObject.

boost::optional<ConvergenceLimits> openstudio::model::Model::convergenceLimits ( ) const

Get the ConvergenceLimits object if there is one, this implementation uses a cached reference to the ConvergenceLimits object which can be significantly faster than calling getOptionalUniqueModelObject<ConvergenceLimits>().

std::string openstudio::model::Model::dayofWeekforStartDay ( ) const

void openstudio::model::Model::disconnect	(	ModelObject	object,
		unsigned	port
	)

Disconnects the port on the given ModelObject.

boost::optional<EnvironmentalImpactFactors> openstudio::model::Model::environmentalImpactFactors ( ) const

Get the EnvironmentalImpactFactors object if there is one, this implementation uses a cached reference to the EnvironmentalImpactFactors object which can be significantly faster than calling getOptionalUniqueModelObject<EnvironmentalImpactFactors>().

boost::optional<ExternalInterface> openstudio::model::Model::externalInterface ( ) const

Get the ExternalInterface object if there is one, this implementation uses a cached reference to the ExternalInterface object which can be significantly faster than calling getOptionalUniqueModelObject<ExternalInterface>().

boost::optional<Facility> openstudio::model::Model::facility ( ) const

Get the Facility object if there is one, this implementation uses a cached reference to the Facility object which can be significantly faster than calling getOptionalUniqueModelObject<Facility>().

boost::optional<FoundationKivaSettings> openstudio::model::Model::foundationKivaSettings ( ) const

Get the FoundationKivaSettings object if there is one, this implementation uses a cached reference to the FoundationKivaSettings object which can be significantly faster than calling getOptionalUniqueModelObject<FoundationKivaSettings>().

template<typename T >

boost::optional<T> openstudio::model::Model::getConcreteModelObjectByName ( const std::string & name ) const

inline

template<typename T >

std::vector<T> openstudio::model::Model::getConcreteModelObjects ( ) const

inline

Returns all ModelObjects of type T, using T::iddObjectType() to speed up the search.

This method will only work for concrete model objects (leaves in the ModelObject inheritance tree), hence the name.

template<typename T >

std::vector<T> openstudio::model::Model::getConcreteModelObjectsByName ( const std::string & name ) const

inline

template<typename T >

boost::optional<T> openstudio::model::Model::getModelObject ( const Handle & handle ) const

inline

Returns the ModelObject referenced by handle if it is of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObject<Zone>(handle) the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

boost::optional<T> openstudio::model::Model::getModelObjectByName ( const std::string & name ) const

inline

Returns the ModelObjects of type T with name (exactMatch).

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject), but please see getConcreteModelObjectByName if T is concrete.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjectsByName<Zone>("Zone1") the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjects ( bool sorted = false ) const

inline

Returns all ModelObjects of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjects<Zone>(), the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjects ( const std::vector< openstudio::Handle > & handles ) const

inline

Returns the subset of ModelObjects referenced by handles which are of type T.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjects<Zone>(handles) the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

std::vector<T> openstudio::model::Model::getModelObjectsByName	(	const std::string &	name,
		bool	exactMatch = `true`
	)		const

inline

Returns all ModelObjects of type T with given name.

This method can be used with T as a concrete type (e.g. Zone) or as an abstract class (e.g. ParentObject).

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getModelObjectsByName<Zone>("Zone1") the user must include both Zone.hpp and Zone_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

boost::optional<T> openstudio::model::Model::getOptionalUniqueModelObject ( ) const

inline

Returns the unique ModelObject of type T if it is found.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getOptionalUniqueModelObject<Facility>() the user must include both Facility.hpp and Facility_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

template<typename T >

T openstudio::model::Model::getUniqueModelObject ( )

inline

Returns the unique ModelObject of type T, creates a one if none are found.

Todo:: Use of this template method requires knowledge of the size of the implementation object. Therefore, to use model.getUniqueModelObject<Facility>() the user must include both Facility.hpp and Facility_Impl.hpp. It may be better to instantiate each version of this template method to avoid exposing the implementation objects, this is an open question.

Note that template specilizations are provided below for objects were there is a performance gain to be had by caching the unique model object eg: getUniqueModelObject<YearDescription>()

template<>

Building openstudio::model::Model::getUniqueModelObject ( )

template<>

FoundationKivaSettings openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputControlFiles openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputControlReportingTolerances openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputControlTableStyle openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputControlTimestamp openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputDiagnostics openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputDebuggingData openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputJSON openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputSQLite openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputEnergyManagementSystem openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputTableSummaryReports openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputSchedules openstudio::model::Model::getUniqueModelObject ( )

template<>

OutputConstructions openstudio::model::Model::getUniqueModelObject ( )

template<>

PerformancePrecisionTradeoffs openstudio::model::Model::getUniqueModelObject ( )

template<>

LifeCycleCostParameters openstudio::model::Model::getUniqueModelObject ( )

template<>

SizingParameters openstudio::model::Model::getUniqueModelObject ( )

template<>

RadianceParameters openstudio::model::Model::getUniqueModelObject ( )

template<>

RunPeriod openstudio::model::Model::getUniqueModelObject ( )

template<>

RunPeriodControlDaylightSavingTime openstudio::model::Model::getUniqueModelObject ( )

template<>

YearDescription openstudio::model::Model::getUniqueModelObject ( )

template<>

Site openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteGroundReflectance openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteWaterMainsTemperature openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteGroundTemperatureBuildingSurface openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteGroundTemperatureFCfactorMethod openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteGroundTemperatureDeep openstudio::model::Model::getUniqueModelObject ( )

template<>

SiteGroundTemperatureShallow openstudio::model::Model::getUniqueModelObject ( )

template<>

Facility openstudio::model::Model::getUniqueModelObject ( )

template<>

WeatherFile openstudio::model::Model::getUniqueModelObject ( )

template<>

SimulationControl openstudio::model::Model::getUniqueModelObject ( )

template<>

LightingSimulationControl openstudio::model::Model::getUniqueModelObject ( )

template<>

AirflowNetworkSimulationControl openstudio::model::Model::getUniqueModelObject ( )

template<>

InsideSurfaceConvectionAlgorithm openstudio::model::Model::getUniqueModelObject ( )

template<>

OutsideSurfaceConvectionAlgorithm openstudio::model::Model::getUniqueModelObject ( )

template<>

HeatBalanceAlgorithm openstudio::model::Model::getUniqueModelObject ( )

template<>

ZoneAirContaminantBalance openstudio::model::Model::getUniqueModelObject ( )

template<>

ZoneAirHeatBalanceAlgorithm openstudio::model::Model::getUniqueModelObject ( )

template<>

ZoneAirMassFlowConservation openstudio::model::Model::getUniqueModelObject ( )

template<>

ZoneCapacitanceMultiplierResearchSpecial openstudio::model::Model::getUniqueModelObject ( )

template<>

ConvergenceLimits openstudio::model::Model::getUniqueModelObject ( )

template<>

ShadowCalculation openstudio::model::Model::getUniqueModelObject ( )

template<>

Timestep openstudio::model::Model::getUniqueModelObject ( )

template<>

ClimateZones openstudio::model::Model::getUniqueModelObject ( )

template<>

EnvironmentalImpactFactors openstudio::model::Model::getUniqueModelObject ( )

template<>

ExternalInterface openstudio::model::Model::getUniqueModelObject ( )

boost::optional<HeatBalanceAlgorithm> openstudio::model::Model::heatBalanceAlgorithm ( ) const

Get the HeatBalanceAlgorithm object if there is one, this implementation uses a cached reference to the HeatBalanceAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<HeatBalanceAlgorithm>().

boost::optional<ComponentData> openstudio::model::Model::insertComponent ( const Component & component )

Inserts Component into Model and returns the primary object, if possible.

boost::optional<InsideSurfaceConvectionAlgorithm> openstudio::model::Model::insideSurfaceConvectionAlgorithm ( ) const

Get the InsideSurfaceConvectionAlgorithm object if there is one, this implementation uses a cached reference to the InsideSurfaceConvectionAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<InsideSurfaceConvectionAlgorithm>().

bool openstudio::model::Model::isDayofWeekforStartDayDefaulted ( ) const

bool openstudio::model::Model::isIsLeapYearDefaulted ( ) const

bool openstudio::model::Model::isLeapYear ( ) const

boost::optional<LifeCycleCostParameters> openstudio::model::Model::lifeCycleCostParameters ( ) const

Get the LifeCycleCostParameters object if there is one, this implementation uses a cached reference to the LifeCycleCostParameters object which can be significantly faster than calling getOptionalUniqueModelObject<LifeCycleCostParameters>().

boost::optional<LightingSimulationControl> openstudio::model::Model::lightingSimulationControl ( ) const

Get the LightingSimulationControl object if there is one, this implementation uses a cached reference to the LightingSimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<LightingSimulationControl>().

static boost::optional<Model> openstudio::model::Model::load ( const path & osmPath )

static

Load Model from file, attempts to load WorkflowJSON from standard path.

static boost::optional<Model> openstudio::model::Model::load	(	const path &	osmPath,
		const path &	workflowJSONPath
	)

static

Load Model and WorkflowJSON from files, fails if either osm or workflowJSON cannot be loaded.

openstudio::Date openstudio::model::Model::makeDate	(	openstudio::MonthOfYear	monthOfYear,
		unsigned	dayOfMonth
	)

openstudio::Date openstudio::model::Model::makeDate	(	unsigned	monthOfYear,
		unsigned	dayOfMonth
	)

openstudio::Date openstudio::model::Model::makeDate	(	openstudio::NthDayOfWeekInMonth	n,
		openstudio::DayOfWeek	dayOfWeek,
		openstudio::MonthOfYear	monthOfYear
	)

openstudio::Date openstudio::model::Model::makeDate ( unsigned dayOfYear )

std::vector<ModelObject> openstudio::model::Model::modelObjects ( bool sorted = false ) const

Get all model objects.

If sorted, then the objects are returned in the preferred order.

Model& openstudio::model::Model::operator= ( const Model & )

default

Model& openstudio::model::Model::operator= ( Model && )

default

bool openstudio::model::Model::operator== ( const Model & other ) const

Equality test, tests if this Model shares the same implementation object with other.

Node openstudio::model::Model::outdoorAirNode ( ) const

Get a Node named 'Model Outdoor Air Node' (intended to be forward translated to an OutdoorAir:Node) and not connected to a PlantLoop or AirLoopHVAC.

create a new Node if necessary and add it to the model

boost::optional<OutputConstructions> openstudio::model::Model::outputConstructions ( ) const

Get the OutputConstructions object if there is one, this implementation uses a cached reference to the OutputConstructions object which can be significantly faster than calling getOptionalUniqueModelObject<OutputConstructions>().

boost::optional<OutputControlFiles> openstudio::model::Model::outputControlFiles ( ) const

Get the OutputControlFiles object if there is one, this implementation uses a cached reference to the OutputControlFiles object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlFiles>().

boost::optional<OutputControlReportingTolerances> openstudio::model::Model::outputControlReportingTolerances ( ) const

Get the OutputControlReportingTolerances object if there is one, this implementation uses a cached reference to the OutputControlReportingTolerances object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlReportingTolerances>().

boost::optional<OutputControlTableStyle> openstudio::model::Model::outputControlTableStyle ( ) const

Get the OutputControlTableStyle object if there is one, this implementation uses a cached reference to the OutputControlTableStyle object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlTableStyle>().

boost::optional<OutputControlTimestamp> openstudio::model::Model::outputControlTimestamp ( ) const

Get the OutputControlTimestamp object if there is one, this implementation uses a cached reference to the OutputControlTimestamp object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlTimestamp>().

boost::optional<OutputDebuggingData> openstudio::model::Model::outputDebuggingData ( ) const

Get the OutputDebuggingData object if there is one, this implementation uses a cached reference to the OutputDebuggingData object which can be significantly faster than calling getOptionalUniqueModelObject<OutputDebuggingData>().

boost::optional<OutputDiagnostics> openstudio::model::Model::outputDiagnostics ( ) const

Get the OutputDiagnostics object if there is one, this implementation uses a cached reference to the OutputDiagnostics object which can be significantly faster than calling getOptionalUniqueModelObject<OutputDiagnostics>().

boost::optional<OutputEnergyManagementSystem> openstudio::model::Model::outputEnergyManagementSystem ( ) const

Get the OutputEnergyManagementSystem object if there is one, this implementation uses a cached reference to the OutputEnergyManagementSystem object which can be significantly faster than calling getOptionalUniqueModelObject<OutputControlFiles>().

boost::optional<OutputJSON> openstudio::model::Model::outputJSON ( ) const

Get the OutputJSON object if there is one, this implementation uses a cached reference to the OutputJSON object which can be significantly faster than calling getOptionalUniqueModelObject<OutputJSON>().

boost::optional<OutputSchedules> openstudio::model::Model::outputSchedules ( ) const

Get the OutputSchedules object if there is one, this implementation uses a cached reference to the OutputSchedules object which can be significantly faster than calling getOptionalUniqueModelObject<OutputSchedules>().

boost::optional<OutputSQLite> openstudio::model::Model::outputSQLite ( ) const

Get the OutputSQLite object if there is one, this implementation uses a cached reference to the OutputSQLite object which can be significantly faster than calling getOptionalUniqueModelObject<OutputSQLite>().

boost::optional<OutputTableSummaryReports> openstudio::model::Model::outputTableSummaryReports ( ) const

Get the OutputTableSummaryReports object if there is one, this implementation uses a cached reference to the OutputTableSummaryReports object which can be significantly faster than calling getOptionalUniqueModelObject<OutputTableSummaryReports>().

boost::optional<OutsideSurfaceConvectionAlgorithm> openstudio::model::Model::outsideSurfaceConvectionAlgorithm ( ) const

Get the OutsideSurfaceConvectionAlgorithm object if there is one, this implementation uses a cached reference to the OutsideSurfaceConvectionAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<OutsideSurfaceConvectionAlgorithm>().

boost::optional<PerformancePrecisionTradeoffs> openstudio::model::Model::performancePrecisionTradeoffs ( ) const

Get the PerformancePrecisionTradeoffs object if there is one, this implementation uses a cached reference to the PerformancePrecisionTradeoffs object which can be significantly faster than calling getOptionalUniqueModelObject<PerformancePrecisionTradeoffs>().

SpaceType openstudio::model::Model::plenumSpaceType ( ) const

Get the space type used for plenums if there is one.

Create a new space type if necessary and add it to the model

std::string openstudio::model::Model::plenumSpaceTypeName ( ) const

Get the space type name used for plenums.

std::vector<openstudio::IdfObject> openstudio::model::Model::purgeUnusedResourceObjects ( )

Removes all ResourceObjects with nonResourceObjectUseCount() == 0.

All objects removed in the course of the purge are returned to support undos. Note that ResourceObjects may have children that are not ResourceObjects, and these may be removed as well.

std::vector<openstudio::IdfObject> openstudio::model::Model::purgeUnusedResourceObjects ( IddObjectType iddObjectType )

Removes all ResourceObjects of given IddObjectType with directUseCount() == 0.

All objects removed in the course of the purge are returned to support undos. Note that ResourceObjects may have children that are not ResourceObjects, and these may be removed as well.

boost::optional<RadianceParameters> openstudio::model::Model::radianceParameters ( ) const

Get the RadianceParameters object if there is one, this implementation uses a cached reference to the RadianceParameters object which can be significantly faster than calling getOptionalUniqueModelObject<RadianceParameters>().

void openstudio::model::Model::resetCalendarYear ( )

void openstudio::model::Model::resetDayofWeekforStartDay ( )

void openstudio::model::Model::resetIsLeapYear ( )

bool openstudio::model::Model::resetSqlFile ( )

Resets the EnergyPlus output SqlFile.

void openstudio::model::Model::resetWorkflowJSON ( )

Reset the WorkflowJSON.

boost::optional<RunPeriod> openstudio::model::Model::runPeriod ( ) const

Get the RunPeriod object if there is one, this implementation uses a cached reference to the RunPeriod object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriod>().

boost::optional<RunPeriodControlDaylightSavingTime> openstudio::model::Model::runPeriodControlDaylightSavingTime ( ) const

Get the RunPeriodControlDaylightSavingTime object if there is one, this implementation uses a cached reference to the RunPeriodControlDaylightSavingTime object which can be significantly faster than calling getOptionalUniqueModelObject<RunPeriodControlDaylightSavingTime>().

bool openstudio::model::Model::setCalendarYear ( int calendarYear )

bool openstudio::model::Model::setDayofWeekforStartDay ( const std::string & dayofWeekforStartDay )

bool openstudio::model::Model::setIsLeapYear ( bool isLeapYear )

bool openstudio::model::Model::setSqlFile ( const SqlFile & sqlFile )

Sets the EnergyPlus output SqlFile.

SqlFile must correspond to EnergyPlus simulation of this Model.

bool openstudio::model::Model::setWorkflowJSON ( const WorkflowJSON & workflowJSON )

Set the WorkflowJSON.

boost::optional<ShadowCalculation> openstudio::model::Model::shadowCalculation ( ) const

Get the ShadowCalculation object if there is one, this implementation uses a cached reference to the ShadowCalculation object which can be significantly faster than calling getOptionalUniqueModelObject<ShadowCalculation>().

boost::optional<SimulationControl> openstudio::model::Model::simulationControl ( ) const

Get the SimulationControl object if there is one, this implementation uses a cached reference to the SimulationControl object which can be significantly faster than calling getOptionalUniqueModelObject<SimulationControl>().

boost::optional<Site> openstudio::model::Model::site ( ) const

Get the Site object if there is one, this implementation uses a cached reference to the Site object which can be significantly faster than calling getOptionalUniqueModelObject<Site>().

boost::optional<SiteGroundReflectance> openstudio::model::Model::siteGroundReflectance ( ) const

Get the SiteGroundReflectance object if there is one, this implementation uses a cached reference to the SiteGroundReflectance object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundReflectance>().

boost::optional<SiteGroundTemperatureBuildingSurface> openstudio::model::Model::siteGroundTemperatureBuildingSurface ( ) const

Get the SiteGroundTemperatureBuildingSurface object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureBuildingSurface object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureBuildingSurface>().

boost::optional<SiteGroundTemperatureDeep> openstudio::model::Model::siteGroundTemperatureDeep ( ) const

Get the SiteGroundTemperatureDeep object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureDeep object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureDeep>().

boost::optional<SiteGroundTemperatureFCfactorMethod> openstudio::model::Model::siteGroundTemperatureFCfactorMethod ( ) const

Get the SiteGroundTemperatureFCfactorMethod object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureFCfactorMethod object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureFCfactorMethod>().

boost::optional<SiteGroundTemperatureShallow> openstudio::model::Model::siteGroundTemperatureShallow ( ) const

Get the SiteGroundTemperatureShallow object if there is one, this implementation uses a cached reference to the SiteGroundTemperatureShallow object which can be significantly faster than calling getOptionalUniqueModelObject<SiteGroundTemperatureShallow>().

boost::optional<SiteWaterMainsTemperature> openstudio::model::Model::siteWaterMainsTemperature ( ) const

Get the SiteWaterMainsTemperature object if there is one, this implementation uses a cached reference to the SiteWaterMainsTemperature object which can be significantly faster than calling getOptionalUniqueModelObject<SiteWaterMainsTemperature>().

boost::optional<SizingParameters> openstudio::model::Model::sizingParameters ( ) const

Get the SizingParameters object if there is one, this implementation uses a cached reference to the SizingParameters object which can be significantly faster than calling getOptionalUniqueModelObject<SizingParameters>().

boost::optional<SqlFile> openstudio::model::Model::sqlFile ( ) const

Returns the EnergyPlus output SqlFile if set.

boost::optional<Timestep> openstudio::model::Model::timestep ( ) const

Get the Timestep object if there is one, this implementation uses a cached reference to the Timestep object which can be significantly faster than calling getOptionalUniqueModelObject<Timestep>().

boost::optional<WeatherFile> openstudio::model::Model::weatherFile ( ) const

Get the WeatherFile object if there is one, this implementation uses a cached reference to the WeatherFile object which can be significantly faster than calling getOptionalUniqueModelObject<WeatherFile>().

WorkflowJSON openstudio::model::Model::workflowJSON ( ) const

Get the WorkflowJSON.

boost::optional<YearDescription> openstudio::model::Model::yearDescription ( ) const

Get the YearDescription object if there is one, this implementation uses a cached reference to the YearDescription object which can be significantly faster than calling getOptionalUniqueModelObject<YearDescription>().

boost::optional<ZoneAirContaminantBalance> openstudio::model::Model::zoneAirContaminantBalance ( ) const

Get the ZoneAirContaminantBalance object if there is one, this implementation uses a cached reference to the ZoneAirContaminantBalance object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirContaminantBalance>().

boost::optional<ZoneAirHeatBalanceAlgorithm> openstudio::model::Model::zoneAirHeatBalanceAlgorithm ( ) const

Get the ZoneAirHeatBalanceAlgorithm object if there is one, this implementation uses a cached reference to the ZoneAirHeatBalanceAlgorithm object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirHeatBalanceAlgorithm>().

boost::optional<ZoneAirMassFlowConservation> openstudio::model::Model::zoneAirMassFlowConservation ( ) const

Get the ZoneAirMassFlowConservation object if there is one, this implementation uses a cached reference to the ZoneAirMassFlowConservation object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneAirMassFlowConservation>().

boost::optional<ZoneCapacitanceMultiplierResearchSpecial> openstudio::model::Model::zoneCapacitanceMultiplierResearchSpecial ( ) const

Get the ZoneCapacitanceMultiplierResearchSpecial object if there is one, this implementation uses a cached reference to the ZoneCapacitanceMultiplierResearchSpecial object which can be significantly faster than calling getOptionalUniqueModelObject<ZoneCapacitanceMultiplierResearchSpecial>().

Friends And Related Function Documentation

bool compareInputAndOutput	(	const ModelObject &	object,
		const std::string &	attributeName,
		double	inputResult,
		double	outputResult,
		double	tol,
		LogLevel	logLevel = `LogLevel::Debug`
	)

The intention is for inputResult to be the value of attributeName calculated using input data, and for outputResult to be the value of attributeName extracted from the Model::sqlFile(). Returns false and logs a message on the Model log channel at logLevel if the (relative) error is greater than tol.

using ModelVector = std::vector<Model>

Public Member Functions

Static Public Member Functions

Related Functions

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation