#include <CoilHeatingDesuperheater.hpp>

Inheritance diagram for openstudio::model::CoilHeatingDesuperheater:

Public Member Functions
Constructors and Destructors
	CoilHeatingDesuperheater (const Model &model)

virtual	~CoilHeatingDesuperheater ()

Getters
boost::optional< Schedule >	availabilitySchedule () const

double	heatReclaimRecoveryEfficiency () const

bool	isHeatReclaimRecoveryEfficiencyDefaulted () const

boost::optional< ModelObject >	heatingSource () const

double	parasiticElectricLoad () const

bool	isParasiticElectricLoadDefaulted () const

Setters
bool	setAvailabilitySchedule (Schedule &schedule)

void	resetAvailabilitySchedule ()

bool	setHeatReclaimRecoveryEfficiency (double heatReclaimRecoveryEfficiency)

void	resetHeatReclaimRecoveryEfficiency ()

bool	setHeatingSource (const ModelObject &modelObject)
	Sets the heating source from which the desuperheater heating coil recovers energy. More...

void	resetHeatingSource ()

bool	setParasiticElectricLoad (double parasiticElectricLoad)

void	resetParasiticElectricLoad ()

Other
AirflowNetworkEquivalentDuct	getAirflowNetworkEquivalentDuct (double length, double diameter)
	Creates a new equivalent duct object if an object is not already attached. More...

boost::optional < AirflowNetworkEquivalentDuct >	airflowNetworkEquivalentDuct () const
	Returns the attached equivalent duct object, if any. More...

Public Member Functions inherited from openstudio::model::StraightComponent
bool	addToNode (Node &node)

boost::optional< AirLoopHVAC >	airLoopHVAC () const
	Returns the optional AirLoopHVAC object that this AirToAirComponent is attached to. More...

ModelObject	clone (Model model) const

void	disconnect ()

boost::optional< ModelObject >	inletModelObject () const
	Returns the optional ModelObject connected to the inlet port. More...

unsigned	inletPort () const
	Returns the inlet port. More...

boost::optional< ModelObject >	outletModelObject () const
	Returns the optional ModelObject connected to the outlet port. More...

unsigned	outletPort () const
	Returns the outlet port. More...

std::vector < openstudio::IdfObject >	remove ()

bool	removeFromLoop ()

	StraightComponent (IddObjectType type, const Model &model)

virtual	~StraightComponent ()

Public Member Functions inherited from openstudio::model::HVACComponent
bool	addToNode (Node &node)
	Adds this object to a new system node and returns a boolean indicating if the addition was successful. More...

bool	addToSplitter (Splitter &splitter)
	Adds this object to a splitter by creating a new branch. More...

boost::optional< AirLoopHVAC >	airLoopHVAC () const
	Returns the optional AirLoopHVAC object that the HVAC component is attached to. More...

boost::optional < AirLoopHVACOutdoorAirSystem >	airLoopHVACOutdoorAirSystem () const
	Returns the optional AirLoopHVACOutdoorAirSystem that the HVAC component is attached to. More...

void	applySizingValues ()

void	autosize ()
	Returns the optional ModelObject connected to this object's port. More...

boost::optional< HVACComponent >	containingHVACComponent () const
	EnergyPlus unitary equipment and air terminals are typically composed of other HVAC components. More...

boost::optional < StraightComponent >	containingStraightComponent () const

boost::optional < ZoneHVACComponent >	containingZoneHVACComponent () const
	Returns any ZoneHVACComponent that contains this HVACComponent. More...

void	disconnect ()
	Removes all connections to other HVACComponent objects. More...

bool	isRemovable () const
	Indicates if the HVACComponent can be removed from the model. More...

boost::optional< Loop >	loop () const
	Returns the optional Loop object that the HVAC component is attached to. More...

boost::optional< PlantLoop >	plantLoop () const
	Returns the optional PlantLoop object that the HVAC component is attached to. More...

std::vector< IdfObject >	remove ()
	Removes the HVACComponent from the model only if isRemovable() return true. More...

virtual	~HVACComponent ()

Public Member Functions inherited from openstudio::model::ParentObject
std::vector< IddObjectType >	allowableChildTypes () const
	Returns a vector of allowable children types. More...

std::vector< ModelObject >	children () const
	Return direct child objects in the Model. More...

virtual	~ParentObject ()

Public Member Functions inherited from openstudio::model::ModelObject
virtual	~ModelObject ()

ModelObject	clone () const
	Creates a deep copy of this object, placing it in this object's model(). More...

ModelObject	clone (Model model) const
	Creates a deep copy of this object, placing it in model. More...

Component	createComponent () const
	Method for creating sharable Model snippets. More...

Model	model () const
	Returns the Model that contains this object. More...

boost::optional< ParentObject >	parent () const
	Return this object's parent in the hierarchy, if it has one. More...

std::vector< ResourceObject >	resources () const
	Get the resources directly used by this ModelObject. More...

template<typename T >
std::vector< T >	getModelObjectSources () const
	Get all objects of type T that point to this object. More...

template<typename T >
std::vector< T >	getModelObjectSources (IddObjectType iddObjectType) const
	Get all objects of type T that point to this object. More...

template<typename T >
boost::optional< T >	getModelObjectTarget (unsigned index) const
	Get the object of type T pointed to by this object from field index. More...

template<typename T >
std::vector< T >	getModelObjectTargets () const
	Get all objects of type T to which this object points. More...

const std::vector< std::string > &	outputVariableNames () const
	Get all output variables names that could be associated with this object. More...

std::vector< OutputVariable >	outputVariables () const
	Get all output variables associated with this object, must run simulation to generate data. More...

boost::optional < openstudio::TimeSeries >	getData (const OutputVariable &variable, const std::string &envPeriod) const
	Get data associated with this output variable and this object. More...

std::vector< LifeCycleCost >	lifeCycleCosts () const
	Returns the list of all LifeCycleCosts that refer to this object. More...

std::vector< IdfObject >	removeLifeCycleCosts ()
	Removes all LifeCycleCosts that refer to this object. More...

IddObjectType	iddObjectType () const
	This is a virtual function that will tell you the type of iddObject you are dealing with. More...

AdditionalProperties	additionalProperties () const
	Returns this object's additional properties, constructing a new object if necessary. More...

bool	hasAdditionalProperties () const
	Returns true if this object has additional properties. More...

std::vector< IdfObject >	removeAdditionalProperties ()
	Removes all additional properties that refer to this object. More...

boost::optional< std::string >	cadObjectId () const

bool	setCADObjectId (const std::string &cadObjectId)

boost::optional< std::string >	gbXMLId () const

bool	setGBXMLId (const std::string &gbXMLId)

boost::optional< std::string >	displayName () const

bool	setDisplayName (const std::string &displayName)

bool	setParent (ParentObject &newParent)
	set the parent, child may have to call non-const methods on the parent More...

bool	operator< (const ModelObject &right) const

bool	operator== (const ModelObject &other) const
	equality test More...

bool	operator!= (const ModelObject &other) const
	inequality test More...

std::vector< ScheduleTypeKey >	getScheduleTypeKeys (const Schedule &schedule) const
	Return the ScheduleTypeKeys indicating how schedule is used in this object. More...

boost::optional< double >	getAutosizedValue (std::string valueName, std::string unitString) const
	Gets the autosized component value from the sql file. More...

virtual std::vector < EMSActuatorNames >	emsActuatorNames () const
	Return the names of the available ems actuators. More...

virtual std::vector< std::string >	emsInternalVariableNames () const
	Return the names of the available ems internal variables. More...

boost::optional< ModelObject >	connectedObject (unsigned port) const

boost::optional< unsigned >	connectedObjectPort (unsigned port) const

Static Public Member Functions
static IddObjectType	iddObjectType ()

Related Functions
(Note that these are not member functions.)
typedef std::vector < CoilHeatingDesuperheater >	CoilHeatingDesuperheaterVector

typedef boost::optional < CoilHeatingDesuperheater >	OptionalCoilHeatingDesuperheater

Related Functions inherited from openstudio::model::ParentObject
std::vector< ModelObject >	getRecursiveChildren (const ParentObject &object, bool includeLifeCycleCostsAndAdditionalProperties=false, bool includeUsedResources=true)
	Returns object and all other objects accessible by calling children() on encountered ParentObjects . More...

std::vector< ModelObject >	getRecursiveChildrenAndResources (const ModelObject &object)
	Returns object and all other objects accessible by calling children() and resources() on encountered ModelObjects . More...

Related Functions inherited from openstudio::model::ModelObject
std::vector< ResourceObject >	getRecursiveResources (const ModelObject &object)
	Returns all ResourceObjects accessible by recursively calling .resources() starting from object. More...

Additional Inherited Members
Protected Types inherited from openstudio::model::HVACComponent
typedef detail::HVACComponent_Impl	ImplType

Protected Types inherited from openstudio::model::ModelObject
typedef detail::ModelObject_Impl	ImplType

Protected Member Functions inherited from openstudio::model::HVACComponent
virtual std::vector< ModelObject >	children () const

	HVACComponent (IddObjectType type, const Model &model)

	HVACComponent (std::shared_ptr< ImplType > impl)

Protected Member Functions inherited from openstudio::model::ParentObject
	ParentObject (IddObjectType type, const Model &model)
	Constructs a new ParentObject object in the model. More...

Protected Member Functions inherited from openstudio::model::ModelObject
	ModelObject (IddObjectType type, const Model &model, bool fastName=false)

	ModelObject (std::shared_ptr< detail::ModelObject_Impl > impl)

Detailed Description

CoilHeatingDesuperheater is a StraightComponent that wraps the OpenStudio IDD object 'OS:Coil:Heating:Desuperheater'.

This coil can be used in air loop simulations but can’t be used by certain compound objects (e.g., AirLoopHVACUnitaryHeatPumpAirToAir, AirLoopHVACUnitaryHeatPumpWaterToAir, or DehumidifierDesiccantNoFans) or any air distribution equipment (e.g., AirTerminalSingleDuctConstantVolumeReheat, AirTerminalSingleDuctVAVReheat, or AirTerminalSingleDuctSeriesPIUReheat).

Constructor & Destructor Documentation

openstudio::model::CoilHeatingDesuperheater::CoilHeatingDesuperheater ( const Model & model )

explicit

virtual openstudio::model::CoilHeatingDesuperheater::~CoilHeatingDesuperheater ( )

inlinevirtual

Member Function Documentation

boost::optional<AirflowNetworkEquivalentDuct> openstudio::model::CoilHeatingDesuperheater::airflowNetworkEquivalentDuct ( ) const

Returns the attached equivalent duct object, if any.

boost::optional<Schedule> openstudio::model::CoilHeatingDesuperheater::availabilitySchedule ( ) const

AirflowNetworkEquivalentDuct openstudio::model::CoilHeatingDesuperheater::getAirflowNetworkEquivalentDuct	(	double	length,
		double	diameter
	)

Creates a new equivalent duct object if an object is not already attached.

boost::optional<ModelObject> openstudio::model::CoilHeatingDesuperheater::heatingSource ( ) const

double openstudio::model::CoilHeatingDesuperheater::heatReclaimRecoveryEfficiency ( ) const

static IddObjectType openstudio::model::CoilHeatingDesuperheater::iddObjectType ( )

static

bool openstudio::model::CoilHeatingDesuperheater::isHeatReclaimRecoveryEfficiencyDefaulted ( ) const

bool openstudio::model::CoilHeatingDesuperheater::isParasiticElectricLoadDefaulted ( ) const

double openstudio::model::CoilHeatingDesuperheater::parasiticElectricLoad ( ) const

void openstudio::model::CoilHeatingDesuperheater::resetAvailabilitySchedule ( )

void openstudio::model::CoilHeatingDesuperheater::resetHeatingSource ( )

void openstudio::model::CoilHeatingDesuperheater::resetHeatReclaimRecoveryEfficiency ( )

void openstudio::model::CoilHeatingDesuperheater::resetParasiticElectricLoad ( )

bool openstudio::model::CoilHeatingDesuperheater::setAvailabilitySchedule ( Schedule & schedule )

bool openstudio::model::CoilHeatingDesuperheater::setHeatingSource ( const ModelObject & heatingSource )

Sets the heating source from which the desuperheater heating coil recovers energy.

Parameters

[in] heatingSource The heating source.

Valid inputs:
CoilCoolingDXSingleSpeed
CoilCoolingDXTwoSpeed
RefrigerationCompressorRack
RefrigerationCondenserAirCooled
RefrigerationCondenserEvaporativeCooled
RefrigerationCondenserWaterCooled

bool openstudio::model::CoilHeatingDesuperheater::setHeatReclaimRecoveryEfficiency ( double heatReclaimRecoveryEfficiency )

bool openstudio::model::CoilHeatingDesuperheater::setParasiticElectricLoad ( double parasiticElectricLoad )

Friends And Related Function Documentation

typedef std::vector<CoilHeatingDesuperheater> CoilHeatingDesuperheaterVector

Public Member Functions

Static Public Member Functions

Related Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Friends And Related Function Documentation