|
|
| WaterHeaterHeatPump (const Model &model) |
|
| WaterHeaterHeatPump (const Model &model, const ModelObject &dxCoil, const HVACComponent &tank, const HVACComponent &fan, Schedule &compressorSetpointTemperatureSchedule, Schedule &inletAirMixerSchedule) |
|
virtual | ~WaterHeaterHeatPump () |
|
|
boost::optional< Schedule > | availabilitySchedule () const |
|
Schedule | compressorSetpointTemperatureSchedule () const |
|
double | deadBandTemperatureDifference () const |
|
boost::optional< double > | condenserWaterFlowRate () const |
|
bool | isCondenserWaterFlowRateAutosized () const |
|
boost::optional< double > | evaporatorAirFlowRate () const |
|
bool | isEvaporatorAirFlowRateAutosized () const |
|
std::string | inletAirConfiguration () const |
|
boost::optional< Schedule > | inletAirTemperatureSchedule () const |
|
boost::optional< Schedule > | inletAirHumiditySchedule () const |
|
HVACComponent | tank () const |
|
ModelObject | dXCoil () const |
|
double | minimumInletAirTemperatureforCompressorOperation () const |
|
double | maximumInletAirTemperatureforCompressorOperation () const |
|
std::string | compressorLocation () const |
|
boost::optional< Schedule > | compressorAmbientTemperatureSchedule () const |
|
HVACComponent | fan () const |
|
std::string | fanPlacement () const |
|
double | onCycleParasiticElectricLoad () const |
|
double | offCycleParasiticElectricLoad () const |
|
std::string | parasiticHeatRejectionLocation () const |
|
Schedule | inletAirMixerSchedule () const |
|
std::string | controlSensorLocationInStratifiedTank () const |
|
|
bool | setAvailabilitySchedule (Schedule &schedule) |
|
void | resetAvailabilitySchedule () |
|
bool | setCompressorSetpointTemperatureSchedule (Schedule &schedule) |
|
bool | setDeadBandTemperatureDifference (double deadBandTemperatureDifference) |
|
bool | setCondenserWaterFlowRate (double condenserWaterFlowRate) |
|
void | resetCondenserWaterFlowRate () |
|
void | autosizeCondenserWaterFlowRate () |
|
bool | setEvaporatorAirFlowRate (double evaporatorAirFlowRate) |
|
void | resetEvaporatorAirFlowRate () |
|
void | autosizeEvaporatorAirFlowRate () |
|
bool | setInletAirConfiguration (std::string inletAirConfiguration) |
|
bool | setInletAirTemperatureSchedule (Schedule &schedule) |
|
void | resetInletAirTemperatureSchedule () |
|
bool | setInletAirHumiditySchedule (Schedule &schedule) |
|
void | resetInletAirHumiditySchedule () |
|
bool | setTank (const HVACComponent &waterHeater) |
|
bool | setDXCoil (const ModelObject &coil) |
|
bool | setMinimumInletAirTemperatureforCompressorOperation (double minimumInletAirTemperatureforCompressorOperation) |
|
bool | setMaximumInletAirTemperatureforCompressorOperation (double maximumInletAirTemperatureforCompressorOperation) |
|
bool | setCompressorLocation (std::string compressorLocation) |
|
bool | setCompressorAmbientTemperatureSchedule (Schedule &schedule) |
|
void | resetCompressorAmbientTemperatureSchedule () |
|
bool | setFan (const HVACComponent &fan) |
|
bool | setFanPlacement (std::string fanPlacement) |
|
bool | setOnCycleParasiticElectricLoad (double onCycleParasiticElectricLoad) |
|
bool | setOffCycleParasiticElectricLoad (double offCycleParasiticElectricLoad) |
|
bool | setParasiticHeatRejectionLocation (std::string parasiticHeatRejectionLocation) |
|
bool | setInletAirMixerSchedule (Schedule &schedule) |
|
bool | setControlSensorLocationInStratifiedTank (std::string controlSensorLocationInStratifiedTank) |
|
|
boost::optional< double > | autosizedCondenserWaterFlowRate () const |
|
boost::optional< double > | autosizedEvaporatorAirFlowRate () const |
|
bool | addToNode (Node &node) |
| Adds this ZoneHVACComponent to a node on an AirLoopHVAC object. More...
|
|
bool | addToThermalZone (ThermalZone &thermalZone) |
| Adds this ZoneHVACComponent to the thermal zone while managing all node connections automatically. More...
|
|
boost::optional< ModelObject > | airInletModelObject () const |
| Provided for backwards compatibility, use inletNode instead. More...
|
|
boost::optional< AirLoopHVAC > | airLoopHVAC () const |
| Returns the AirLoopHVAC attached to this ZoneHVACComponent. More...
|
|
boost::optional< ModelObject > | airOutletModelObject () const |
| Provided for backwards compatibility, use outletNode instead. More...
|
|
boost::optional< Node > | inletNode () const |
| Returns the optional node connected to the inletPort(). More...
|
|
unsigned | inletPort () const |
| Returns the inlet port. More...
|
|
boost::optional< Node > | outletNode () const |
| Returns the optional node connected to the outletPort(). More...
|
|
unsigned | outletPort () const |
| Returns the outlet port. More...
|
|
bool | removeFromAirLoopHVAC () |
| If this ZoneHVACComponent is used as a supply component on an AirLoopHVAC system, then this method will detach this ZoneHVACComponent from the AirLoopHVAC system, otherwise this method does nothing. More...
|
|
void | removeFromThermalZone () |
| Detaches this ZoneHVACComponent from the associated ThermalZone. More...
|
|
void | removeReturnPlenum () |
| Remove any return plenum attached to this ZoneHVACComponent. More...
|
|
boost::optional
< AirLoopHVACReturnPlenum > | returnPlenum () const |
|
bool | setReturnPlenum (const ThermalZone &plenumZone) |
| Establish plenumZone as the return plenum for this ZoneHVACComponent. More...
|
|
virtual boost::optional
< ThermalZone > | thermalZone () const |
| Returns the optional ThermalZone that this ZoneHVACComponent is attached to. More...
|
|
virtual | ~ZoneHVACComponent () |
|
bool | addToNode (Node &node) |
| Adds this object to a new system node and returns a boolean indicating if the addition was successful. More...
|
|
bool | addToSplitter (Splitter &splitter) |
| Adds this object to a splitter by creating a new branch. More...
|
|
boost::optional< AirLoopHVAC > | airLoopHVAC () const |
| Returns the optional AirLoopHVAC object that the HVAC component is attached to. More...
|
|
boost::optional
< AirLoopHVACOutdoorAirSystem > | airLoopHVACOutdoorAirSystem () const |
| Returns the optional AirLoopHVACOutdoorAirSystem that the HVAC component is attached to. More...
|
|
void | applySizingValues () |
|
void | autosize () |
| Returns the optional ModelObject connected to this object's port. More...
|
|
boost::optional< HVACComponent > | containingHVACComponent () const |
| EnergyPlus unitary equipment and air terminals are typically composed of other HVAC components. More...
|
|
boost::optional
< StraightComponent > | containingStraightComponent () const |
|
boost::optional
< ZoneHVACComponent > | containingZoneHVACComponent () const |
| Returns any ZoneHVACComponent that contains this HVACComponent. More...
|
|
void | disconnect () |
| Removes all connections to other HVACComponent objects. More...
|
|
bool | isRemovable () const |
| Indicates if the HVACComponent can be removed from the model. More...
|
|
boost::optional< Loop > | loop () const |
| Returns the optional Loop object that the HVAC component is attached to. More...
|
|
boost::optional< PlantLoop > | plantLoop () const |
| Returns the optional PlantLoop object that the HVAC component is attached to. More...
|
|
std::vector< IdfObject > | remove () |
| Removes the HVACComponent from the model only if isRemovable() return true. More...
|
|
virtual | ~HVACComponent () |
|
std::vector< IddObjectType > | allowableChildTypes () const |
| Returns a vector of allowable children types. More...
|
|
std::vector< ModelObject > | children () const |
| Return direct child objects in the Model. More...
|
|
virtual | ~ParentObject () |
|
virtual | ~ModelObject () |
|
ModelObject | clone () const |
| Creates a deep copy of this object, placing it in this object's model(). More...
|
|
ModelObject | clone (Model model) const |
| Creates a deep copy of this object, placing it in model. More...
|
|
Component | createComponent () const |
| Method for creating sharable Model snippets. More...
|
|
Model | model () const |
| Returns the Model that contains this object. More...
|
|
boost::optional< ParentObject > | parent () const |
| Return this object's parent in the hierarchy, if it has one. More...
|
|
std::vector< ResourceObject > | resources () const |
| Get the resources directly used by this ModelObject. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectSources () const |
| Get all objects of type T that point to this object. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectSources (IddObjectType iddObjectType) const |
| Get all objects of type T that point to this object. More...
|
|
template<typename T > |
boost::optional< T > | getModelObjectTarget (unsigned index) const |
| Get the object of type T pointed to by this object from field index. More...
|
|
template<typename T > |
std::vector< T > | getModelObjectTargets () const |
| Get all objects of type T to which this object points. More...
|
|
const std::vector< std::string > & | outputVariableNames () const |
| Get all output variables names that could be associated with this object. More...
|
|
std::vector< OutputVariable > | outputVariables () const |
| Get all output variables associated with this object, must run simulation to generate data. More...
|
|
boost::optional
< openstudio::TimeSeries > | getData (const OutputVariable &variable, const std::string &envPeriod) const |
| Get data associated with this output variable and this object. More...
|
|
std::vector< LifeCycleCost > | lifeCycleCosts () const |
| Returns the list of all LifeCycleCosts that refer to this object. More...
|
|
std::vector< IdfObject > | removeLifeCycleCosts () |
| Removes all LifeCycleCosts that refer to this object. More...
|
|
IddObjectType | iddObjectType () const |
| This is a virtual function that will tell you the type of iddObject you are dealing with. More...
|
|
AdditionalProperties | additionalProperties () const |
| Returns this object's additional properties, constructing a new object if necessary. More...
|
|
bool | hasAdditionalProperties () const |
| Returns true if this object has additional properties. More...
|
|
std::vector< IdfObject > | removeAdditionalProperties () |
| Removes all additional properties that refer to this object. More...
|
|
boost::optional< std::string > | cadObjectId () const |
|
bool | setCADObjectId (const std::string &cadObjectId) |
|
boost::optional< std::string > | gbXMLId () const |
|
bool | setGBXMLId (const std::string &gbXMLId) |
|
boost::optional< std::string > | displayName () const |
|
bool | setDisplayName (const std::string &displayName) |
|
bool | setParent (ParentObject &newParent) |
| set the parent, child may have to call non-const methods on the parent More...
|
|
bool | operator< (const ModelObject &right) const |
|
bool | operator== (const ModelObject &other) const |
| equality test More...
|
|
bool | operator!= (const ModelObject &other) const |
| inequality test More...
|
|
std::vector< ScheduleTypeKey > | getScheduleTypeKeys (const Schedule &schedule) const |
| Return the ScheduleTypeKeys indicating how schedule is used in this object. More...
|
|
boost::optional< double > | getAutosizedValue (std::string valueName, std::string unitString) const |
| Gets the autosized component value from the sql file. More...
|
|
virtual std::vector
< EMSActuatorNames > | emsActuatorNames () const |
| Return the names of the available ems actuators. More...
|
|
virtual std::vector< std::string > | emsInternalVariableNames () const |
| Return the names of the available ems internal variables. More...
|
|
boost::optional< ModelObject > | connectedObject (unsigned port) const |
|
boost::optional< unsigned > | connectedObjectPort (unsigned port) const |
|
WaterHeaterHeatPump is a ZoneHVACComponent that wraps the OpenStudio IDD object 'OS:WaterHeater:HeatPump'.
As of EnergyPlus version 8.4.0 this object maps to WaterHeaterHeatPumpPumpedCondenser in idf format.